Acknowledgment is mandatory if legitimately requested by the package's
"ACK requested" flag. The L2 layer will have to ensure that compliant
ACK packages will always be sent out automatically as required by the
standard.
For IEEE 802.15.4 compliance, the NET_L2_IEEE802154_ACK_REPLY option is
therefore being deprecated.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds dummy link layer for offloaded ifaces, allowing
ifaces to directly receive l2_enable calls
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
There is no reason why the default size should be 2,
because an event is only a combination of
{uint32_t + void*} + info
Using 2 as default causes a high risk of loosing events,
setting the default to a more sensible value of 5 still
restricts memory usage but keeps it more safe.
Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
RD-Client is essential part of LwM2M specification and it can't
be disabled from LwM2M engine. This commit deprecates Kconfig
variable CONFIG_LWM2M_RD_CLIENT_SUPPORT and removes
all usages if it.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Added support for handle case when all data is not possible to
add in 1 message for Send and Observed Notification.
Notification continuous pending timeseries data is triggred
by iMIN attribute.
Send Operation generate continuous message in multiple lwm2m
message.
Normal Read by server only report back latest stored data.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_NRF5_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME.
All SoC files have been updated with the addition of an ieee802154 node
(disabled and only on those SoCs that define ieee802154-supported. The
peripheral has been enabled in the nRF52840DK board (used for testing
ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_KW41Z_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
KW41Z files have been updated with the addition of radio and an
ieee802154 nodes The peripheral has been enabled in the frdm_k41z board
(used for testing ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The crypto driver is used internally, so there's no real need to expose
its name as a Kconfig option. Just drop it in favor of a plain string
with the same previous value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC1200_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
In this case, the driver already had bindings, however, it was still
using NET_DEVICE_INIT.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move driver to use {NET_}DEVICE_DT_INST_DEFINE. This lets us
remove the IEEE802154_CC2520_DRV_NAME Kconfig symobl.
We also update the ieee802154 build_all test to actually enable
the CC2520 driver.
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove NET_TCP_BACKLOG_SIZE from KConfig and from test,
because it's not present anymore in current version of TCP stack.
Signed-off-by: Andrey Dodonov <Andrey.Dodonov@endress.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Even though bash is commonly available as /bin/bash there are
exceptions (e.g NixOS). This commit allow the use of the scripts in my
environment and is generic.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The device already has a DT compatible (and uses DT properties).
Instantiate the device using the DT-based macros and remove hardcoded
name.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for the gateway object [EXPERIMENTAL] used by the
MG100, BT510, and BT610 LwM2M demo.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
LwM2M was not covered by networking build all test, leaving an opening
for possible regression in modules that are not enabled by default in
the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjust the test thread priority so that the test / IP stack
has a chance to run and the test passes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Tests should always start with test_, otherwise detection of subtests
will not work through sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use DT_INST_SPI_DEV_HAS_CS_GPIOS() in drivers to determine if we should
utilize CS_GPIO base SPI chipselect handling. This allows us to remove
Kconfig option for this feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
NET_INIT_PRIO (defined in subsys/net/ip/Kconfig) is currently hardcoded
to 90 (it's not set via any Kconfig.defconfig files either). Maybe it
could be given a prompt or be removed, but just remove the assignment
for now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
The prompt was removed in commit 2ec7e70509 ("net: routing: Hide routing
option temporarily").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by IEEE802154_RAW_MODE, defined in
drivers/ieee802154/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by IEEE802154_CC1200 and
IEEE802154_RF2XX.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is already enabled indirectly through being selected by
NET_L2_IEEE802154_RFD, which is enabled in the configuration file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
