Tests cannot be executed in the board because ECC initialization will
clear SRAM contents that are used by this test to persist data across
resets.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This follows the same convention that has already been adopted by Intel
Alder Lake and Raptor Lake boards.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is following the same convention that was recently introduced to Alder
Lake boards (intel_adl). Additionally, an "S" suffix is added to the
boards, since what's currently supported is in fact the Raptor Lake S
variant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1. Add atcwdt200 options for WDT_NODE in testcase.
2. Add the board overlay file in wdt sample to specify
the watchdog0 alias
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
Adds the AON Timer device in the OpenTitan Earlgrey device tree.
Adds overlay files to enable the watchdog and set the alias to
`watchdog0`.
Adds the AON timer (watchdog part) to the supported features section
of the OpenTitan documentation.
Signed-off-by: Tyler Ng <tkng@rivosinc.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Run the tests/drivers/watchdog/wdt_basic_api on the stm32h573i_dk
for both IWDG and WWDG of the stm32h5 device
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add appropriate configuration parameters for using the Intel TCO
watchdog driver with the rpl_crb board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Modifying counter drivers (rtc and timer) to rely completely on
device tree and not on Kconfig of MDK flags.
Adapting dtsi for all SoCs and adapting test configuration.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add nucleo c031c6 as allowed platform for iwdg and wwdg tests
to verify functionality on the STM32C0-series.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Currently, the s32z270dc2_r52 board only supports running on RAM,
so samples or tests watchdogs that perform SoC reset will not produce
results. Set the build only for these samples and tests until the
reset SoC function is supported.
Signed-off-by: Quang Bui Trong <quang.buitrong@nxp.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
nxp LPC and RTxxx series has a power firmware which is conflict with
noninit variable, so filter out cases for those platforms
fixing: #48801
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Define a common overlay for all the stm32 boards where the
tests/drivers/watchdog/wdt_basic_api is running.
The RCC apb1 clock freq is reduced to pass the test
except on stm32H7 family : special overlay file.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Adds support for running the wdt test on the Raspberry Pi Pico by
increasing the window size and disabling timeouts.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Update test suite to leverage new ZTEST APIs.
TEST=twister -T tests/drivers/watchdog/wdt_basic_api # Only build
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Add watchdog support to the mimxrt595 platform.
The mimxrt595 platform is excluded from the watchdog
test case because the test case uses variables in the
noinit section that need to be retained through a reset
but the rt595 does not retain this memory through a
reset.
Signed-off-by: Chay Guo <changyi.guo@nxp.com>
Configure the testcase.yaml to execute watchdog testcase
wdt_basic_api on each IWDG and WWDG on all the stm32 boards
With two generic stm32 .overlay files as extra config :
one wdg is tested when the other is disabled.
Removing from board overlay.
Giving the list of boards else non-stm32 ones could try building
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For consistency with the scheme used for other nRF peripherals,
use the peripheral name that nRF Product Specifications use.
In this case, it is WDT, not WATCHDOG.
Also remove the requirement for the label property in the binding.
It is no longer needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable watchdog timer on RT1160 evk. This was tested using
the watchdog timer api test (tests/drivers/watchdog/wdt_basic_api)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add watchdog support to the mimxrt685 platform.
The mimxrt685 platform is excluded from the watchdog
test case because the test case uses variables in the
noinit section that need to be retained through a reset
but the rt685 does not retain this memory through a
reset.
Signed-off-by: David Leach <david.leach@nxp.com>
The stm32 wwdg driver was currently tested only on disco_l475_iot1.
Additionally add nucleo_f091rc, such that one board with an CM0 core is
tested. And add nucleo_g431rb, that one board is included that has
newer register mapping and a 128 prescaler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Review tests applicability so that it only relies on watchdog
compatible availability. Additionally, tweak APB prescaler
in case of window watchdog test, so that timeout value can be
achieved.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Set maximum window value as a test variable.
This allows to set a much shorter value that is compatible with
use in stm32 window watchdog.
Additionally, tweak test configuration so that it is applied on
compatible base (when available).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In npcx7 series, the Timer and Watchdog module (TWD) generates the
clocks and interrupts used for timing periodic functions in the system.
It also provides watchdog reset signal generation in response to a
failure detection.
The CL also includes:
— Add npcx watchdog device tree declarations.
— Zephyr watchdog api implementation.
— Add Watchdog definitions for npcx7 series in
tests/drivers/watchdog/wdt_basic_api/src/test_wdt.c for
supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
STM32H7 and STM32F7 guarantee last write RAM retention over reset,
only for 64bits.
See details in Application Note AN5342
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Not all watchdog devices support a warning callback before reset. If
the driver refuses to accept that configuration record the test as
having passed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
