Add multiple channels in overlay to test the sequencer.
Change clock source to correctly pass the test.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add support for npcx4m8f_evb board that is a development platform to
evaluate the Nuvoton NPCX4 embedded controller.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Fixed pinout in adc overlays to align with board
Allowed adc driver sample
Added overlay for gpio_basic_api test support
Added overlay for i2c_api test support
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
Support sampling more than 2 channels using the ADC API test. This
requires updates to the repeated samplings test, which samples using 2
channels even when more channels are defined by the ADC test overlay.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
To allow the ADC API unit test to skip tests for non-implemented
features, return -ENOTSUP.
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
If the driver does not implement an optional feature, then skip the test
if -ENOTSUP is returned.
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
This updates the configurations for these two boars to match the expected
best practices for new boards, as discussed in #61140.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
This board is a relatively inexpensive development kit for USB-PD
controllers, using an UPD301C controller.
This Zephyr config includes support for:
* UART (present on he debug header of the board), tested with the
hello_world sample application;
* the one standalone LED (CAP_MIS), tested with the blinky sample
application;
* the rotary encoder (PDO_SEL), via ADC, tested with the adc sample
application;
* the current sense amplifier (I_SENSE), currently untested;
* the SPI bus, connected internally in the UPD301C to the UPD350;
* the I2C bus, exposed on the debug header, currently untested.
Note that the drivers.uart.async_api.rtt has to be disabled, as it is
for other m0 boards with no dma or it fails to build.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Adds support for the NXP VMU RT1170 board. This Vehicle
Management Unit based on the i.MX RT1176 brings a fantastic
combination of sensors and IO all on one board for development
of various systems. It is also the featured board for
CogniPilot's Cerebri - VMU autopilot software based on Zephyr.
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Enable adc0 with 2 channels 22, 23 on standard group with
normal end of conversion callback. Channels correspond to
VREFL(0V), VREFH(3.3V).
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
- The boards\arm\cy8cproto_063_ble board now has ADC enabled
- This includes overlay files for the test app and sample app
Signed-off-by: Bill Waters <bill.waters@infineon.com>
Effort has been made to abstract the features that are common
to both the Pico and Pico W into a shared file when possible.
This commit does not include the addition of bluetooth or wifi
drivers for the W's Infineon module.
Signed-off-by: Dave Rensberger <davidr@beechwoods.com>
Enable ADC support for RT1040 EVK. Tested using samples/drivers/adc,
using channels 3 and 4 of ADC0.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- This includes the driver, test app, and sample app
- Only the boards\arm\cy8cproto_062_4343w board is supported for now
Signed-off-by: Bill Waters <bill.waters@infineon.com>
