Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from tests. It has
been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove qemu_cortex_m3 from various bluetooth tests and samples since
they enable NVS which requires CONFIG_FLASH_PAGE_LAYOUT which is
not supported on qemu_cortex_m3 since there is no flash driver.
We get build failures with the arm-clang compiler because nvs.c
is referencing z_impl_flash_get_page_info_by_offs which does not
exist.
Switch to qemu_x86 as the integration_platforms if it was
qemu_cortex_m3 before.
Removed the bluetooth.mesh.mesh_shell.reduced_legacy as this was
added specifically for building on qemu_cortex_m3.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This adds commands to advertise Solicitation PDUs, configure
On-Demand Private Proxy and manage Solicitation PDU RPL.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
- Add entry for client and server in composition data.
- Add Client commands to aggregate and send messages.
MESH/SR/AGG/BV-02-C requires more key slots.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add Transport SAR Configuration models to shell.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Adds Large Comp Data Server and Client
- Defines some dummy metadata for Health Server
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds commands in the mesh shell for remote provisioning client
operation, including scanning, provisioning and reprovisioning.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds remote provisioning models rpr_srv and rpr_cli, and exposes them as
a bearer for the provisioning process.
The remote provisioning models provide the following features:
- Remote provisioning of new devices, using a remote provisioning server
as a proxy.
- Reprovisioning of existing devices, generating a new device key and
changing addresses and composition data.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This updates some of the defaults in the mesh shell's config to allow
various Mesh 1.1 models to be used in the shell.
EPA provisioning and DFU requires much larger multisegment messages,
therefore support for maximum sized message is enabled by default and
stack sizes are increased working values.
Additionally, log buffer is increased and thread sleep time is reduced
to avoid dropping of useful logs.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds conditional support for the BLOB and DFU models in the mesh shell.
Additionally creates a dummy BLOB stream for testing.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
nrf51 has been discontinued. There is no reason to support
ble mesh tests for nrf51 DK platform. As alternative support
of nrf52840 has been added if there wasn't before.
Also, microbit lacks significant amount of RAM (about 800 bytes)
to build mesh test.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
mesh_shell application has been included recently some set new
abilities that added more functionality for testing.
That caused the application cannot fit in some supported plarforms
like qemu_cortex_m3. The reduced legacy configuration has been
added to fit stack into it. This platform is used in CI.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Update the default value of BT_MESH_LPN_RECV_DELAY to align with new
lower boundary for legacy advertiser.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/53189
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Setting the extended advertiser as default advertiser
to improve both preformence and reliability.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Alters several provisioning related features to allow commands to be
functional with application defined Provisioning properties &
capabilities.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds Kconfig option for the Mesh Shell Health server.
The shell implementation of Health Server test commands is
dependent on the user adding and initializing the shell Health
Server instance in their application to make the commands functional.
To prevent any confussion about how these commands work, a Kconfig
option has been added to allow conditional compilation of these
commands. In this way the user must actively enable this feature, making
the conditional requirements more clear.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Increases the main stack size of the mesh shell test application.
This resolves issue where application is not able to pass initialization
step.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Increase main thread stack size so that the sample can be run on
nrf52832 and nrf52840 DKs.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove CONFIG_CONSOLE_HANDLER from project configuration. When building
for native_posix this produces the following warning:
warning: CONSOLE_HANDLER was assigned the value 'y' but gotthe value 'n'
Check these unsatisfied dependencies: SERIAL_SUPPORT_INTERRUPT (=n)
The shell works without this option since this is handled by the shell
itself instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disable the CONFIG_TEST_LOGGING_DEFAULTS Kconfig option which forces
immedate logging, since that is not compatible with Bluetooth and its
tests.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable controller filtering feature not used on mesh stack.
This reduces some RAM usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
