Add BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX Kconfig to allow the
omit of EVENT_OVERHEAD_START_US and EVENT_OVERHEAD_END_US in
the time reservation calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in sw switch single timer id use for nRF53x
series SoC.
Regression introduced in commit cfcbe5d68e ("Bluetooth:
Controller: Remove redudant header file includes").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker implementation to prefer to keep ticker node
started in case of race condition to start and stop.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add build only tests to cover Periodic Advertising ADI
support in advertising state and in Periodic
Synchronization state.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pushes all work done in the topic-ble-llcp branch into main branch
This is a refactoring of the LL control procedures; the refactored
control procedures are hidden behind a KConfig option and
per default disabled
Goal of the refactoring:
close issue Link Layer Control Procedure overhaul #15256
make it easier to add/update control procedures
Refactoring consists in principal of writing explicit state machines
for the control procedures.
To reduce the risk of regression errors unit-tests have been added
Following control procedures are implemented:
Connection update procedure
Channel map update procedure
Encryption procedure
Feature exchange procedure
Version exchange procedure
ACL termination procedure
Connection parameters request procedure
LE Ping procedure
Data Length Update procedure
PHY update procedure
Min. nr. Of channels used procedure
Constant Tone extension request procedure
This is a joined work by the people listed in the signed-off-by
list (in alphabetical order)
Signed-off-by: Andries Kruithof Andries.Kruithof@nordicsemi.no
Signed-off-by: Erik Brockhoff erbr@oticon.com
Signed-off-by: Piotr Pryga piotr.pryga@nordicsemi.no
Signed-off-by: Szymon Janc szymon.janc@codecoup.pl
Signed-off-by: Thomas Ebert Hansen thoh@oticon.com
Signed-off-by: Tommie Skriver tosk@demant.com
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
A FEM in this case is an external Front-End Module. This is basically
a range booster with some extra amplification in the TX and RX paths.
This feature is supported for the Nordic open source controller. See
the changes to the ubx_bmd345eval_nrf52840 board for a quick summary
of what you have to do to take advantage of this.
(This patch doesn't actually remove the feature in the openisa HAL,
though, because that never implemented the required GPIO handling
routines.)
We are using the 'fem' property previously added to the
nordic,nrf-radio's devicetree binding, which points to the FEM that is
in use. If you have this property and the node it points to is
enabled, the controller subsystem respects it. Otherwise, FEM support
is disabled.
This obsoletes the following Kconfig options, which are now unused:
- CONFIG_BT_CTLR_GPIO_PA
- CONFIG_BT_CTLR_GPIO_PA_PIN
- CONFIG_BT_CTLR_GPIO_PA_POL_INV
- CONFIG_BT_CTLR_GPIO_PA_OFFSET
- CONFIG_BT_CTLR_GPIO_LNA
- CONFIG_BT_CTLR_GPIO_LNA_PIN
- CONFIG_BT_CTLR_GPIO_LNA_POL_INV
- CONFIG_BT_CTLR_GPIO_LNA_OFFSET
- CONFIG_BT_CTLR_FEM_NRF21540
- CONFIG_BT_CTLR_GPIO_PDN_PIN
- CONFIG_BT_CTLR_GPIO_PDN_POL_INV
- CONFIG_BT_CTLR_GPIO_CSN_PIN
- CONFIG_BT_CTLR_GPIO_CSN_POL_INV
- CONFIG_BT_CTLR_GPIO_PDN_CSN_OFFSET
The PA and LNA pins are now specified via fem-specific devicetree
properties in the FEM node:
- The "generic" PA/LNA case is handled with the ctx-gpios and
crx-gpios properties of the generic-fem-two-ctrl-pins compatible,
respectively.
- If the fem is an nRF21540, use the tx-en-gpios and rx-en-gpios
properties instead (and also respectively). This allows us to specify
FEM properties in a way that makes sense for the hardware datasheet,
while still handling them in a uniform way within the controller.
We support this in the nRF5 HAL with a new radio_nrf5_fem.h
sub-header, which pulls in radio_nrf5_fem_generic.h or
radio_nrf5_fem_nrf21540.h depending on the fem node's compatible, if
one is defined. These in turn let us replace the implementation
routines in radio.c with DT equivalents.
Keep in-tree users and devicetree binding documentation up to date.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add integration_platforms to testcase.yaml to catch issues during CI.
With out this change these tests only get build during the nightly CI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add privacy configuration to init test for both central and peripheral
roles with or without extended advertising.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Set CIG Parameters command
* LE Remove CIG command
* LE Create CIS command
* LE Accept CIS Request command
* LE Reject CIS Request command
* LE CIS Established event
* LE CIS Request event
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add build only tests to cover Periodic Advertising in
Advertising state and Periodic Advertising in
Synchronization state support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added conf files to test advertiser, broadcaster, peripheral
and central state/role build combinations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Improvement in test case name is needed to make it easier
to navigate from test case name to the actual test
folder.
This is useful as some tools that consume tests directory
will only output test case name without directory names
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
Include building the init tests with the new Link Layer
split architecture and with debug options to cover
possible conditional compilations.
Relates to #12860.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Include building the init tests with the new Link Layer
split architecture.
Has the data length update and controller privacy disabled
until they are implemented in the new architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
