We had plenty of coverage for k_cycle_get(), but not its
32-bit variant. Run a case in user mode so that the system
call handler gets covered.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On 64-bit systems the most notable difference is due to longs and
pointers being 64-bit wide. Therefore there must be a distinction
between ints and longs. Similar to the prf.c case, this patch properly
implements the h, hh, l, ll and z length modifiers as well as some small
cleanups.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Using void pointers as universal arguments is widely used. However, when
compiling a 64-bit target, the compiler doesn't like when an int is
converted to a pointer and vice versa despite the presence of a cast.
This is due to a width mismatch between ints (32 bits) and pointers
(64 bits). The trick is to cast to a widening integer type such as
intptr_t and then cast to
void*.
When appropriate, the INT_TO_POINTER macro is used instead of this
double cast to make things clearer. The converse with POINTER_TO_INT
is also done which also serves as good code annotations.
While at it, remove unneeded casts to specific pointer types from void*
in the vicinity, and move to typed variable upon function entry to make
the code cleaner.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's useful to be able to inspect the key returned from
z_arch_irq_unlock() to see if interrupts were enabled at the point
where z_arch_irq_lock() was called. Architectures tend to represent
this is a simple way that doesn't require platform assembly to
inspect.
Adds a simple test to kernel/common that validates this predicate with
a nested lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Most CPUs have instructions like LOCK, LDREX/STREX, etc which
allows for atomic operations without locking interrupts that
can be invoked from user mode without complication. They typically
use compiler builtin atomic operations, or custom assembly
to implement them.
However, some CPUs may lack these kinds of instructions, such
as Cortex-M0 or some ARC. They use these C-based atomic
operation implementations instead. Unfortunately these require
grabbing a spinlock to ensure proper concurrency with other
threads and ISRs. Hence, they will trigger an exception when
called from user mode.
For these platforms, which support user mode but not atomic
operation instructions, the atomic API has been exposed as
system calls.
Some of the implementations in atomic_c.c which can be instead
expressed in terms of other atomic operations have been removed.
The kernel test of atomic operations now runs in user mode to
prove that this works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Fix multiple definitions of `ram_console'. The ram_console
array is already defined in drivers/console/ram_console.c.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
The sys_dlist_insert_*() functions had a behavior where a NULL
argument for the insertion position to sys_dlist_insert_after/before()
was interpreted as "the end of the list". We never used that
convention (except in one spot internal to dlist.h which was not
itself used anywhere), and of course already have an API for appending
and prepending to a list.
In practice this was a performance disaster. The NULL check is
virtually never provable statically by the compiler, so that test and
branch is present always. And worse, the check and call to another
function was pushing this beyond the complexity limit for gcc to
inline a function (at -Os optimization anyway), forcing us to use
function calls for what should be a ~8 instruction sequence. The
upshot is that dlist insertions were 2-3x slower than they needed to
be.
Deprecate these older APIs and introduce a new sys_dlist_insert() call
which can be much better optimized.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Several places in the code have constructions like this:
if (bool_variable) {
atomic_set_bit(flags, FLAG);
} else {
atomic_clear_bit(flags, FLAG);
}
To reduce the amount of code for such situations, introduce a new
atomic_set_bit_to() helper which lets you condense the above five
lines to a single one:
atomic_set_bit_to(flags, FLAG, bool_variable);
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The original implementation allows a list to be corrupted by list
operations on the removed node. Existing code attempts to avoid this by
using external state to determine whether a node is in a list, but this
is fragile and fails when the state that holds the flag value is changed
after the node is removed, e.g. in preparation for re-using the node.
Follow Linux in invalidating the link pointers in a removed node. Add
API so that detection of particpation in a list is available at the node
abstraction.
This solution relies on the following steady-state invariants:
* A node (as opposed to a list) will never be adjacent to itself in a
list;
* The next and prev pointers of a node are always either both null or
both non-null.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
printk is supposed to be very lean, but should at least not
print garbage values. Now when a 64-bit integral value is
passed in to be printed, 'ERR' will be reported if it doesn't
fit in 32-bits instead of truncating it.
The printk documentation was slightly out of date, this has been
updated.
Fixes: #7179
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were being truncated to 32-bits, and only 8
hex digits were supported.
An extraneous printk() at the beginning of the test
which was not being tested in any way has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was another "global variable" API. Give it function syntax too.
Also add a warning, because on nRF devices (at least) the cycle clock
runs in kHz and is too slow to give a precise answer here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add test description, RTM links and doxygen links for common,
interrupt and boot page table test cases.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Zephyr code routinely assumes conventional ILP32/LP64 integer
behavior, and occasionally relies on it to perform some nice tricks.
This is despite the fact that this behavior (while pervasively adopted
and in use on all architectures we care about supporting) isn't
actually guaranteed by the language standard which allows much looser
semantics than actual exist on hardware.
Put it into the intmath section of this test as a build time thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Instead of completely excluding those tests, mark them as skipped and
provide an noop function that marks the test as skipped where test is
not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test validates random number generator APIs that
is not related to kernel and should not be part of
kernel tests.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Modified the testcase for comparing the successive random
numbers generated by sys_rand32_get(). Also, added new configs
for verifying different sources of random number generation.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
If the systick period is < 5ms the clock testcase will
stall.
Added a note to warn whoever hits it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Basic test for sys_kernel_version_get verifying macros work correctly
and we get the expected version parts using the macros.
Fixes#4777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
64-bit types were not being handled properly and depending on the
calling convention could result in garbage values being printed.
We still truncate these to 32-bit values, the predominant use-case
is printing timestamp delta values which generally fit in a 32-bit
value. However we are no longer printing random stuff.
Test case for printk() updated appripriately to catch this regression.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes sparse warning:
<snip>/zephyr/zephyr/misc/printk.c:50:5: warning: symbol '_char_out' was not declared. Should it be static?
Change-Id: I5af0860e9f8f827002ae9a142b5924d3de8d51b6
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
