802.11 doesn't have specific constraints, it just says that listen
interval should be >=0 and it a 2 byte field.
3 as a typical DTIM value from nRF chipsets, so, remove the hardware
specific line and just set a failure.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This implements support for RFC 7217 which describes a method
to have stable IPv6 Interface Identifiers to be used with IPv6
Stateless Address Autoconfiguration (SLAAC). The stable IIDs are used
to provide enhanced privacy so that an IPv6 address configured using
this method is stable within each subnet, but the corresponding
Interface Identifier changes when the host moves from one network
to another. This method is meant to be an alternative to generating
Interface Identifiers based on hardware (MAC) addresses,
such that the benefits of stable addresses can be achieved without
sacrificing the security and privacy of users.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
* Add CONFIG_OPENTHREAD_PLATFORM_MESSAGE_MANAGEMENT to allow enabling
message management by the platform.
* Add implementation of `otPlatMessagePoolInit`, `otPlatMessagePoolNew`
and `otPlatMessagePoolFree`.
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
If a gateway is not set for a interface,
also log the destination address.
Also print the interface index instead of the
interface pointer.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Add condition check so that the 11k flag will be updated for set
operation only.
Fix print log error when getting 11k status.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Using strncpy gives this warning
warning: 'strncpy' output may be truncated copying 32 bytes from
a string of length 32 [-Wstringop-truncation]
strncpy(roaming_params.neighbor_rep.neighbor_ap[idx].bssid_info,
bssid_info,
sizeof(roaming_params.neighbor_rep.neighbor_ap->bssid_info));
There is '\0' at the end of the allocated buffer so we can safely
use memcpy() here to avoid any warnings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we are not able to overwrite string variables in sscanf
call. Allocate also one extra byte for null terminator character.
Fixes#80644
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Generated PEM headers need to be created before we build the WiFi shell
when WIFI_NM_WPA_SUPPLICANT_CRYPTO_ENTERPRISE is enabled, so add an
explicit dependency on the app target to be certain these headers are
created
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The "wifi ap config" command uses the station interface via
net_if_get_first_wifi(), and should use the ap interface.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
This patch adds a feature to directly connect to stored Wi-Fi
credentials without having to compose the NET_MGMT commands yourself.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for station.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
If AP indicates the presence of buffered traffic, then it is up to the
STA to decide whether to stay in PS or come out of PS, add configuration
options that can be used at runtime to choose this.
This is tagged as "noup" because it's a backport and "fromlist" cannot
be used as it won't apply cleanly.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
MbedTLS specifically checks for null-terminator, else it skips PEM
format processing and tries to parse it as DER causing parsing failures.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The 11v_btm_query shell command was calling parse_number() using
a pointer to uint8_t. This will cause memory overwrite and possible
crash. Convert to use long temporary value to avoid this.
Fix also the output prints in case of an error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Rework the wifi-shell code so that external subcommands can be
bolted into it easily. This means that the commands should be
created using SHELL_SUBCMD_ADD().
Place the various subcommands in alphabetical order to find them
more easily.
Split long lines in order to pass CI checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In case WPA supplicant disabled DPP, we need to compile out the
corresponding DPP code in Wi-Fi shell too.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The `cmd_wifi_dpp_ap_auth_init` function was added but is not yet
aligned with others.
This update enhances consistency with the following changes:
- Unified the order of declaration for `opt`, `opt_index`,
`state`, and `long_options`.
- Wrapped lines in the `long_options` declaration to prevent them
from extending too far to the right.
- Applied `struct option` as `static const`
- Unified the wrapping of `getopt_long` calls, regardless of
the length of the `options` string.
- Using `getopt_state` to access `optarg` and also `optopt` offers
a better alternative to direct global access.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Evaluate CONFIG_LINKER_ITERABLE_SUBALIGN in CMake instead of in the
linker script.
It cannot be assumed that a linker generator implementation is
pre-processed and therefore Kconfig settings cannot be used in those
but must be evaluated in CMake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Ensure that the output certificates directory is created, where
generated certificates will be placed. This fixes a build error seen
when using `make` to build samples/net/wifi for the rd_rw612_bga board,
where the output directory for generated certificates did not exist at
build time.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The L2 function `ieee802154_decipher_data_frame()` relied on upper layer
LL address fields which breaks encapsulation.
Also fixes a bug introduced in another fix that went overboard (#53734).
Fixes: #78490
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Found a few variable declarations that were not yet moved to the top of
the function/block. Doing this before actually fixing #78490 so that the
fix becomes more readable.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
When an incoming PAN ID does not match or when an error occurs while
sending association requests, then locks were not properly released.
Fixes: #78495
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
We do not need promiscuous mode setting in host side when testing
bridging with native-sim, so just ignore errors in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to Mbed TLS changelog this feature was set default ON
since 3.1.0 release, so the build symbol is no more available.
This commit removes it from Zephyr.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
When virtual interface is being started or stopped so when the
interface is brought up or down, check the return code and pass
it to net_if_up() or net_if_down() calls.
This helps to avoid printing success status even if the interface
up/down failed at the virtual interface level.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The legacy bridging code prevented normal IP traffic to the
bridged Ethernet interfaces. This is not intuitive and differs
how bridging setup works in Linux. This commit changes that and
creates a separate virtual interface that is doing the actual
bridging. This enables the bridged Ethernet interfaces to work
normally and provide IP connectivity.
How this works in practice:
* User needs to enable CONFIG_NET_ETHERNET_BRIDGE
* User needs to have a device with more than one Ethernet
interface
* After booting, the net-shell or program API can be used
to add interfaces to the bridge like this.
net bridge addif 1 3 2
where the 1 is the bridge interface index and
2 and 3 are the Ethernet interface indices.
* The bridging is then finally enabled / started when the
bridge interface 1 is taken up
net iface up 1
* If bridged interfaces are removed from the bridge (minimum
of two interfaces are needed there), then the bridging is
disabled automatically. The bridge interface stays up in
this case and can be taken down manually.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adds missing checks for get_capabilities method not being NULL.
Fixes crash with netusb and possibly other drivers.
Signed-off-by: Maciej Panek <panekmaciej@outlook.com>
Increase wifi connect input parameters max count to 13. Previous count
7 is not enough if other security type is supported.
When enabling softAP, the parameter cnx_params in cmd_wifi_ap_enable()
is with static key word. Then the parameter will always save
configurations of last time. Remove static keyword to eliminate effects
of configs from last tim and do memset before setting up softAP.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Increase max count of CONFIG_WIFI_SHELL_MAX_AP_STA from 5 to 8. The
SoftAP of NXP wifi chip can support up to 8 stations.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
