Add support for u-blox EVK-NINA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected duplicate pin assignment for i2c1 in dts file
Corrected copyright date in Kconfig.defconfig
Rebase to update test_adc.c
Corrected sda-pin, scl-pin assignments and LED aliases
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add pinctrl-0 properties for configuration of UART, I2C, SPI, FTM,
DAC, ADC, ACMP, and PWT peripherals. These settings are based on what
is defined in the board/pinmux.c file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adds nucleo_g071rb board to the uart_async_api test.
Therefore additionally add usart1 in board definitions.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Enables dma test cases loop_transfer and chan_blen_transfer
on stm32g03116_disco, nucleo_g071rb and nucleo_g0b1re.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add support for u-blox EVK-ANNA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Addressed review comments, including SW2
Rebased to pick up new board in test_adc.c - corrected typo
Reverted to sda-pin, scl-pin
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add rak4631 board from RAKWireless based on nrf52840 and SX1262.
Board Documentation is completed
Signed-off-by: Guillaume Paquet <guillaume.paquet@smile.fr>
Add support for u-blox EVK-NINA-B3 which uses the nRF52840.
This board is similar to the nRF52840dk_nrf52840 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected permissions
Addressed review comments
Removed arduino_spi
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add nrf52840dk_nrf52840 as integration platform since
there is already devicetree overlay for that.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not explicitly enable fixed regulator driver for boards and tests
because it is automatically selected when corresponding node
is defined.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove board code and a few associated samples/tests that explicitly
call pinmux_pin_set() to set a given pin as GPIO. This is handled as
part of gpio_mcux_configure() so we don't need to do it again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for u-blox BMD-360-EVAL which uses the nRF52811.
This board is functionally equivalent to the nRF52dk with a
nRF52811 mounted in place of the nRF52832 with the exception
of not having debug-in and the shield SWD header.
DEVELOP_IN_NRF52832 is *not* required since the IC
used is the nRF52811.
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52811.
Tested with blinky, button, and Bluetooth peripheral_hr
Edited to include changes similar to those requested in
https://github.com/zephyrproject-rtos/zephyr/pull/33850
(nRF52810 there vs. nRF52811 here)
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
This commit is about the it8xxx2 analog to digital converter
driver. Support 8 channels ch0~ch7 and 10-bit resolution.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Flag was present only when ZLI was enabled. That resulted in additional
ifdefs needed whenever code supports ZLI and non-ZLI mode.
Removed ifdefs, added build assert to irq connections to fail at
compile time if IRQ_ZERO_LATENCY is set but ZLI is disabled. Additional
clean up made which resulted from removing the ifdef.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The stm32 wwdg driver was currently tested only on disco_l475_iot1.
Additionally add nucleo_f091rc, such that one board with an CM0 core is
tested. And add nucleo_g431rb, that one board is included that has
newer register mapping and a 128 prescaler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The Kconfig symbol CONFIG_DMA_0_NAME was recently removed. Update the
dma channel link transfer test to get the device name from an
application level Kconfig instead, similar to other dma driver tests.
This fixes a CI compliance failure that checks for references to
undefined Kconfig symbols.
Tested on the mimxrt1050_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
test minor/major link mode on frdm_k64f and mimxrt1060_evk
log as below:
Running test suite dma_m2m_link_test
===================================================================
START - test_dma_m2m_chan0_1_major_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
It is harder to be kind than to be wise........
It is harder to
PASS - test_dma_m2m_chan0_1_major_link
===================================================================
START - test_dma_m2m_chan0_1_minor_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
It is harder to be kind than to be wise........
It is harder to be kind than to
PASS - test_dma_m2m_chan0_1_minor_link
===================================================================
START - test_dma_m2m_chan0_1_minor_major_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
DMA transfer done ch 1
It is harder to be kind than to be wise........
It is harder to be kind than to be wise........
PASS - test_dma_m2m_chan0_1_minor_major_link
===================================================================
Test suite dma_m2m_link_test succeeded
===================================================================
PROJECT EXECUTION SUCCESSFUL
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add support for u-blox BMD-330-EVAL which uses the nRF52810.
This board is functionally equivalent to the nRF52dk_nrf52810
with the exception of not having debug-in and the shield SWD
header. DEVELOP_IN_NRF52832 is *not* required since the IC
used is the nRF52810
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52810.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected file permissions, added newline at end of CMakeLists.txt
Corrected comnment that said NRF52832 instead of NRF52810
Adding missing copyright information
Corrected link to u-blox BMD-330 (was pointing to BMD-300)
Addressed review comments, corrected permissions
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Currently the MAX17055 driver assumes that a battery matching the
default characteristics is used.
This change allows battery characteristics to be specified in device
tree and writes them to the MAX17055 on initialization.
Existing default values are maintained for backwards compatibility.
Initialization routine taken from MAX17055 Software Implementation
Guide, document UG6365.
Signed-off-by: Hayden Ball <hayden@playerdata.co.uk>
flash_write_protection_set() was deprecated.
This patch removes usage of it and the test case which was
testing deprecated API behaviors.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
As CONFIG_FLASH_SIMULATOR_ERASE_PROTECT become a dead option.
this commit removes it as well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add support for u-blox BMD-300-EVAL. Also includes BMD-301-EVAL
and BMD-350-EVAL. All share the nRF52832, and are functionally
equivalent to the nRF52dk_nrf52832 with the exception of not
having debug-in and the shield SWD header.
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52832.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected type in index.rst (should be nRF52dk_nrf52832, not ..810)
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add test to check if uart_irq_is_pending() correctly returns 0 (meaning
there are no more RX and TX pending interrupts) when all RX and TX data
is processed.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
This commit enables test_spi_loopback sample application for
Nucleo_F207zg. test_spi_loopback was executed under the following case
sceanarios on SPI-1:
a. With DMA
b. No DMA - No Interrrupts
c. No DMA - Interrupts Enabled
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Changed chan type to int in the test_timeout function which follows
change in the api to always use int for channel parameter.
Added assert to check that channel was successfully allocated in
test_resetting_cc().
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adds support for the Texas Instruments FDC2X1X Capacitance-to-Digital
Converter for Proximity and Level Sensing Applications.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
The spi loopback tests enables SPI ASYNC which for the SAM0 SPI driver
requires DMA support is configured. None of the current SAM0 based
boards configure DMA for SPI and thus we exclude these boards as the
test will not compile for these boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SAM0 uart driver requires dma configured for async support and
the uart async support assumes all UARTs support async. None of the
atmel SAM0 boards are configured this way and thus the tests will
not currently build for these boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit provides the necessary overlay to make the test pass
on the QuickFeather hardware.
Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com>
Originally added in 7733b94224.
This filter is not well-formed. It's meant to match nodes like
/leds/led_0 in this DTS:
/ {
aliases {
led0 = &led0;
};
leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <...>;
label = "LED 0";
};
};
};
Uses look like this:
filter: dt_compat_enabled_with_alias("gpio-leds", "led0")
But notice how the led_0 node doesn't have compatible "gpio-leds";
it's actually the *parent* node that has that compatible.
Replace this with a new filter, dt_enabled_alias_with_parent_compat(),
which is used like this:
filter: dt_enabled_alias_with_parent_compat("led0", "gpio-leds")
This has a name and argument order that makes the meaning of the
filter clearer.
Replace in-tree users with the new filter.
Deprecate the old filter and warn about its use using the standard
logging module.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix the error of the [Coverity CID :219489] "Structurally
dead code in tests/drivers/dma/loop_transfer/src/test_dma_loop.c"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Added low power configuration to testcase.yaml. In this mode
UARTE is disabled when RX and TX is not used.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
