- If device PM is not supported -ENOSYS is returned, update test case to
account for that
- Remove usage of device_pm_control_nop
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for u-blox EVK-NINA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected duplicate pin assignment for i2c1 in dts file
Corrected copyright date in Kconfig.defconfig
Rebase to update test_adc.c
Corrected sda-pin, scl-pin assignments and LED aliases
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Make some change on two codvar test cases to fit testing under SMP,
and shorter the test cases execution time.
Fixes#33558.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Try to remove CONFIG_MP_NUM_CPUS=1 configuration for the test of
condvar, sysmutex and semaphore, in order to test SMP condition more.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The return value is documented to be true if the work was pending, but
the implementation returned true only if the work was actually running
(i.e. the caller had to wait). It should also return true if
scheduled or submitted work was cancelled.
Note that this means the return value cannot be used to determine
whether the call slept.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Do not configure this as a test, this will change footprint drastically
and will skew results and tracking.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add pinctrl-0 properties for configuration of UART, I2C, SPI, FTM,
DAC, ADC, ACMP, and PWT peripherals. These settings are based on what
is defined in the board/pinmux.c file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Tests are designed to run over the DUMMY interface but when run on
hardware, net_if_get_default() can return the actual hardware
interface.
Fixes: #31969
Signed-off-by: David Leach <david.leach@nxp.com>
After the introduction of usart1 the kernel/genisr_table test could
no longer build, due to an interrupt conflict.
Adopt the TEST_NUM_IRQS to resolve the conflict.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Adds nucleo_g071rb board to the uart_async_api test.
Therefore additionally add usart1 in board definitions.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Enables dma test cases loop_transfer and chan_blen_transfer
on stm32g03116_disco, nucleo_g071rb and nucleo_g0b1re.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Using more realistic values to avoid confusion and make it clear the
distinction between min-residency-us and other idle properties like
exit-latency-us.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
em_starterkit has ICCM at 0x0 address, access to 0x0
address doesn't generate any exception, so we access
to 0xFFFFFFFF address instead to trigger exception.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add additional API to stream_flash that can be used to make
stream write progress persistent using the settings subsystem.
This functionality makes it possible to resume a write operation
after it was interrupted, e.g. by power loss.
Signed-off-by: Jonathan Nilsen <Jonathan.Nilsen@nordicsemi.no>
Move ec_host_cmd.h out of the top level include/ dir into
include/mgmt/ec_host_cmd.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It can be convenient to "iterate" over the elements of a property, in
the same way it is convenient to "iterate" over enabled instances.
Add a new macro for doing this, along with a DT_INST_FOREACH_PROP_ELEM
variant.
This is likely to be more convenient than UTIL_LISTIFY or FOR_EACH in
some situations because:
- it handles inputs of any length
- compiler error messages will be shorter and more self-contained
- it is easier to use with phandle-array type properties, which
require more complicated macro boilerplate when used with
util_macro.h APIs
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
With LLVM and native_posix, this is not defined and is not available in
limits.h. Workaround the issue for now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for u-blox EVK-ANNA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Addressed review comments, including SW2
Rebased to pick up new board in test_adc.c - corrected typo
Reverted to sda-pin, scl-pin
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
This test has implemented USB HID class callbacks that
actually have no function and should not return 0.
Remove unused and wrong implemented callbacks.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move cmsis OS api headers under include/portability. Those are not
libraries and only serve to provide a level of abstraction using the
CMSIS OS APIs to existing Zephyr interfaces.
Removed one level and put them directly under include/portability.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This work is similar to one performed for ./net/ptp/clock/ test.
However, there is one notable extension - the check in iface_cb()
callback also checks for virtual interfaces defined in
subsys/net/l2/virtual/ipip/ipip.c. Those 'virtual' interfaces are
required for this test to be run.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The tests/net/ipv6/src/main.c uses net_if_get_default() to get the
interface for testing. This is problematic when board introduces its own
linker script, which places board's network interface on the "default"
position - i.e. the first one.
To fix this issue - the lookup for network device defined for this test
is used instead.
Moreover, interfaces rename has been performed in a manner, which would
allow working with 'eth_native_posix' interface being added as linker
object when drivers/ethernet/eth_native_posix.c file is linked for
./zephyr/tests/net/ipv6 test on 'native_posix' board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This change is required to allow correct tests operation after changing
the definition of linker script placement rule (to be more strict and
using the device name).
The struct net_if interfaces have been renamed to preserve correct
order.
Moreover, the iface_cb() function now immediately returns for
interfaces, which are not supposed to be used in this tests - for
example ones already defined on board on which the test is run.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The struct net_if object placement in linker 'net_if_area' section
now depends on the order of ETH_NET_DEVICE_INIT() macros in the source
code (for the same object file - like app/libapp.a(main.c.obj)).
Currently the 'eth_offloading_enabled_test' device is placed first,
followed by 'eth_offloading_disabled_test'.
This placement is important when one would like to access those
interfaces with net_if_get_default() function.
After the rename the order is explicit, when we append the device name
to the ._net_if.static.<dev name> object in linker's net_if_area.
The code now works as all struct net_if interfaces are placed as
'._net_if.static.net_if' objects.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The struct net_if object placement in linker 'net_if_area' section
now depends on the order of liked libraries (like
app/libapp.a(main.c.obj). As a result interfaces defined in testing
applications are placed first in the 'net_if_area' section.
Problem arises when board has other interfaces, which are placed on the
first (i.e. default) position. In this case the test just fails as wrong
network interface is used.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add rak4631 board from RAKWireless based on nrf52840 and SX1262.
Board Documentation is completed
Signed-off-by: Guillaume Paquet <guillaume.paquet@smile.fr>
Added implementation of log_msg2 which is creating log messages
using cbprintf packaging and storing them in circular ring buffer
(mpsg_pbuf).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There's a typedef for non-pointer values compatible with atomic
non-pointer objects. Add a similar typedef for pointer values, and
the corresponding macro for initializing atomic pointer types.
This also will simplify replacing the Zephyr atomic API with one
based on C11 atomics, should that be desirable. C11 atomic pointer
values are not void*.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add support for u-blox EVK-NINA-B3 which uses the nRF52840.
This board is similar to the nRF52840dk_nrf52840 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected permissions
Addressed review comments
Removed arduino_spi
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
This change adds field to L2CAP connect command allowing to choose
ECFC in L2CAP connect() function and adds required logic to perform
such connection.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
