Add pinctrl-0 properties for configuration of UART, I2C, SPI, FTM,
DAC, ADC, ACMP, and PWT peripherals. These settings are based on what
is defined in the board/pinmux.c file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When building and running the rpmsg_service sample on MPS2 AN521
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building and running the openamp sample on MPS2 AN521,
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This application shows how to use SO_TXTIME option, which can be
used to specify the time when the network packet should be sent
out by the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
pm_power_state_force no longer requires the idle thread to run.
Just removing the following k_sleep for two reasons, first it is
not necessary, second it tests that pm_power_state_force works
as it should.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_power_state_force no longer requires the idle thread to run. Just
removing the following k_sleep for two reasons, first it is not
necessary, second it tests that pm_power_state_force works as it
should.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The conn_raw_input() in connection.c will clone the incoming
packet so that it is possible to receive socket data in
multiple packet sockets. This is all fine except that if the
socket is never calling recv(), then the cloned net_pkt is never
processed and we will have a memory leak.
What this all means in practice, is that we should call recv()
for every packet socket in order to flush the socket for any
incoming data even if the socket is just sending data.
Fixes#34462
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Uninitialization of uart transport was missing disabling of TX
interrupt. It had to be done by the user before using uart.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add new kconfigs
Include the ns-app built by TF-M build system for regression tests
Update tfm_ipc sample to use new kconfig
Signed-off-by: Andreas Vibeto <andreas.vibeto@nordicsemi.no>
We need 1 byte of headroom for the SPI HCI protocol.
This is not added automatically on the slave side of the SPI connection.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
These changes turn out to have been incompatible with the way pinctrl
drivers are going to work, so we need to go back to what we had before
until we can agree on a better approach.
Squash of the following reverts:
Revert "boards: nrf: fix deprecated I2C properties"
This reverts commit 2a4ac9ac02.
Revert "samples: switch nrf overlays to sda-gpios, scl-gpios"
This reverts commit 01bb08e7d8.
Revert "boards: nrf: switch to sda-gpios, scl-gpios"
This reverts commit 17a66304c4.
Revert "i2c: nordic: switch to phandle arrays for pinmux"
This reverts commit 821c03a14a.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Fixes#34097
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This sample has implemented USB HID class callbacks that
actually have no function and should not return 0.
Remove unused and wrong implemented callbacks.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move cmsis OS api headers under include/portability. Those are not
libraries and only serve to provide a level of abstraction using the
CMSIS OS APIs to existing Zephyr interfaces.
Removed one level and put them directly under include/portability.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add rak4631 board from RAKWireless based on nrf52840 and SX1262.
Board Documentation is completed
Signed-off-by: Guillaume Paquet <guillaume.paquet@smile.fr>
Normally main.c file doesn't have a header, beacuse it doesn't need to
be declared to other modules.
And in this sample it makes more sense to use name msgdev.h instead of
main.h as the header file for msgdev.c.
Signed-off-by: Paul He <pawpawhe@gmail.com>
The sample uses generate_inc_file_for_target for some "webpages" that
get included. However, the directory that the generated files are
put into: ${ZEPHYR_BINARY_DIR}/include/generated/web_page isn't
created and thus the build fails.
Add a simple 'file(MAKE_DIRECTORY ..)' to create the dir.
Fixes#34345
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removing CONFIG_TRACING_CPU_STATS in favor of
CONFIG_THREAD_RUNTIME_STATS which provides per thread stats. The same
functionality is also available when Thread analyzer is enabled with the
runtime stats enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add nucleo_l552ze_q_ns boards to the list of platforms
that can build and run the psa_level1 tf-m integration
sample. We add a dts overlay as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not need to force TFM Isolation Level 2 for the
STM32 board that can build with TM-M. We remove the
respective Kconfig setting. We also remove the Kconfig
overlay for STM32L562 board in the psa_level1 sample,
which was used for forcing Isolation Level 1; this is
not needed any more.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The sample showed the error between the two clocks, but did not show
how to use the skew to reconstruct one clock from the other and the
resulting error.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove board code and a few associated samples/tests that explicitly
call pinmux_pin_set() to set a given pin as GPIO. This is handled as
part of gpio_mcux_configure() so we don't need to do it again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A bug was introduced when encoding/decoding moved to separate
functions where sizeof no longer had the correct argument.
The size of the encode buffer is passed to the encode function.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The functionality of the MPU depends on userspace, which has not
been implemented on AArch64. Therefore we skip that case for now.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The stm32 wwdg driver was currently tested only on disco_l475_iot1.
Additionally add nucleo_f091rc, such that one board with an CM0 core is
tested. And add nucleo_g431rb, that one board is included that has
newer register mapping and a 128 prescaler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Limit adafruit_2_8_tft_touch_v2 sample variant execution to the boards
that have this shield available.
In order to run the test in CI bench, add the following in
twister map.yml file on matching board:
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
For instance:
- connected: true
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
id: 0673FF323535474B43171415
platform: nucleo_f429zi
product: STM32 STLink
runner: openocd
serial: /dev/ttyACM0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the nanopb library and generator tools as a module.
Nanopb is a small code-size Protocol Buffers implementation in ansi C.
It is especially suitable for use in microcontrollers,
but fits any memory restricted system.
Nanopb home: https://jpa.kapsi.fi/nanopb/
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Take the int-pin information (i.e. what pin between INT1
and INT2 the drdy is attached to) directly from DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
