This adds to the usual qemu_x86_64 and qemu_cortex_a53 to
the entries for Sys-T catalog message in sample.yaml.
As the Sys-T backend has been updated to support 64-bit
for catalog messages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The BT tiny configuration has been removed some time ago,
but documentation has been still referencing it.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Recently OpenAMP introduced the possibility to set the sizes for TX and
RX buffers per created instance. Expose this also to Zephyr users by
using a DT property "zephyr,buffer-size".
For the sake of simplicity use the same DT property to set the buffer
size for both TX and RX buffers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Adjusted Bluetooth parameters that have an impact on MTU and DLE
negotiation during a connection.
Enabled the Packet Reassembly feature from mcumgr libraries in the SMP
Server sample with the Bluetooth transport configuration. This change
should increase the overall throughput of the DFU process over
Bluetooth.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It has been validated that the nucleo_h743zi board works correctly,
with '__nocache' buffers and data caches enabled, so this patch enables
support for the former.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add specific configuration and DTS overlay files for NUCLEO-H7A3ZI-Q
board to the littlefs example project. The second half of the SOC flash
is used as flash partition for littlefs.
Signed-off-by: Christoph Heller <chris@metanetics.de>
integration platforms should not be in common section if we have
scenarios with different set of integration platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The goal of this commit is to update existing STM32 boards descriptions
to use these size "DT_SIZE" macros to enhance readability. To realize this
i used a python script, which will detect the STM32 Boards
/zephyr/board/arm, and then will update in the dts files the partition
description using "DT_SIZE_K" and "DT_SIZE_M" macros.
Check manually and modify in .overlay files in samples and tests.
Signed-off-by: TLIG Dhaou <dhaou.tlig-ext@st.com>
Cleaned up the IPC configuration for nRF5340 SoC in Device Tree. This
change fixes the (simple_bus_reg) warning about the missing or empty
reg/ranges property.
This is a follow-up to commit cf6a58d.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extend sample to show how to use alternative approach of adding
subcommands using new APIs: SHELL_SUBCMD_SET_CREATE, SHELL_SUBCMD_ADD
and SHELL_SUBCMD_COND_ADD.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Function uart_fifo_read() returns 'int' (it may return negative values
in error cases). Its return value is stored in the variable 'read' that
is, however, of type 'size_t'.
Change the type of the variable 'read' from 'size_t' to 'int' to
accomodate proper handling of uart_fifo_read() invocation.
Coverity-CID: 248408
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
This extends the samples to build for C++ using the same code.
This shows MIPI Sys-T can work C++ too.
The change to main.c regarding to the struct log_msg_ids is
simply that the compiler errored out complaining the members
must be initialized the same order as the declaration.
Also C++ dislikes a string literal being assigned to char*,
so assign them to const char* instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates the sample.yaml file to exclude problem architectures
from this sample project. SYS-T does not support 64-bit or
big endian architectures. The posix arch is excluded as it
is generating numerous anomolous runtime messages because it
does have the means to determine when data resides in the
rodata section.
It also converts the list of allowed platforms to lists of
platforms to use for integration testing. This helps to increase
general testing coverage.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adding configurations for enabling this sample project on cavs
platforms. This patch also contains a fix to mipi_syst library
which resolves the memory alignment issue across different
architectures.
Fixes#43344
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Fix spelling errors in assorted .rst files. The errors were found
using a tool called 'codespell'.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Route printk()'s through logging subsystem. This is required
to get clean OS panics in log output. If this is not defined, e.g.
the stack backtrace is mixed with the Zephyr OS panic information.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Documentation build for 2.7 was failing due to using only a single
character instead of double for showing a module name.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
Virtual MSD J-Link support on some development boards has caused an
issue with SMP due to limiting the maximum size of UART data via the CDC
endpoint, add a link to the SMP documentation and smp_svr sample
application on how to disable MSD functionality and resolve the issue.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
For consistency with the scheme used for other nRF peripherals,
use the peripheral name that nRF Product Specifications use.
In this case, it is WDT, not WATCHDOG.
Also remove the requirement for the label property in the binding.
It is no longer needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit cf6a58d3f6.
Restore the "nordic,nrf-ipc" compatible property in mbox nodes for both
nRF5340 cores and use it together with the new "nordic,mbox-nrf-ipc"
one. This way either the MBOX or the IPM driver can be used for these
nodes without further modifications. This eliminates the need to use
overlays in quite a few cases, so remove all those no longer needed
ones (which are also a bit confusing now as they refer to no longer
existing ipc@2a000 and ipc@41012000 nodes).
Restore also the ipc node label removed in the commit mentioned above,
as the label is used in validation of base addresses of nRF DT nodes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This adds to sample.yaml to build for MIPI Sys-T catalog message
support.
Note that the current implementation of emitting Sys-T
catalog messages does not support 64-bit and architectures
having additional alignment requirements. So only allow qemu_x86
and mps2_an385 at the moment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds qemu_x86_64 and qemu_cortex_a53 to make sure 64-bit
support for Sys-T is not broken in the future.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compilers often combine strings to conserve space, if one string is
a perfect substring of another one towards the end. So add another
string in the test to make sure sys-t with catalog messages is still
working correctly under this scenario.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compilers often combine strings to conserve space, if one string is
a perfect substring of another one towards the end. So add another
string in the test to make sure dictionary logging is still working
correctly under this scenario.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some information in the USB DFU sample was out of date.
Also added some example lines for the Permanent download and automatic
reboot features.
Signed-off-by: Martijn Stommels <martijn@martijnpc.nl>
This commit adds the USB_DFU_PERMANENT_DOWNLOAD and USB_DFU_REBOOT and
symbols.When the permanent download symbol is enabled, slot 1 will be
marked as confirmed. With the reboot symbol enabled, the devices
automatically reboots after the download is completed.
The functionality is split into two symbols to allow the automatic
reboot without confirming the image. This enables image confirmation via
another channel. For example via the shell’s Mcuboot commands.
This functionality allows downloading an image to the device without the
user having to interact with the device. It is useful in cases where
ease of use is more important then safety. For example when using USB
download for daily development. This is especially applicable for
devices with a closed case.
The changes were tested on an nrf52840dk. The following line can be used
to build the USB DFU example with the symbols enabled.
west build -b nrf52840dk_nrf52840 zephyr/samples/subsys/usb/dfu \
-d build-dfu -- -DCONFIG_BOOTLOADER_MCUBOOT=y \
-DOVERLAY_CONFIG=overlay-reboot-permanent.conf \
-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE\
=\"bootloader/mcuboot/root-rsa-2048.pem\"
Fixes#41921
Signed-off-by: Martijn Stommels <martijn@martijnpc.nl>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Add configuration for stm32h7b3i_dk board which enables
integration of touch controller (KSCAN) present on the board
into LVGL
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Instead of having one single WQ per backend, move to one WQ per
instance instead and add a new "zephyr,priority" property in the DT to
set the WQ priority of the instance. Fix the sample as well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Added the stop_bits_client parameter to the modbus_serial_param struct.
Being able to configure the number of stop bits for the client
independently from the parity setting, allows to support connecting to
modbus server that do not follow the MODBUS over Serial Line Specification
and Implementation Guide.
Signed-off-by: Constantin Krischke <constantin.krischke@lemonbeat.com>
Signed-off-by: Jan Geldmacher <jan.geldmacher@lemonbeat.com>
This fixes an issue with the filesystem mcumgr being registered twice
in the sample application which resolves an issue with an endless loop
if a mcumgr handler is used which is not registered.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
This is a device-specific option and should therefore not be activated in
a generic project. Since the only boards that use this Kconfig symbol
(lpcxpresso54xx, lpcxpresso55sxx) don't build anyway, this option could
be removed. The device/board specific configuration should be placed in
the boards folder along with an appropriate device tree describing the
IPC nodes.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
