Rename the BT_ISO_INTERVAL_MIN/MAX to
BT_ISO_SDU_INTERVAL_MIN/MAX to avoid confusing this
the the ISO interval which is different from the SDU
interval.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two new parameters to bt_iso_chan_send:
sn: The packet sequence number which shall be incremeted
per SDU interval.
ts: An optional timestamp value used to synchronize SDUs.
The sequence number in the API uses a 32-bit value even though
the sequence number for the HCI command is 16-bit. This is to
properly handle wrapping of sequence numbers, which is much
easier to do with additional bits allocated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The reserved memory mechanism (sections and regions definition) has been
entirely replaced, greatly extended and made it better by the work done
on the zephyr,memory-region compatible.
Since there is are no actual users, we can remove it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
- Inform about the requirement to configure ADC channels in Devicetree
- Fix sample output example
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Improve include list, so that file is self-contained
- Don't use an array type for the samples buffer, as its length is 1
- Improve some error messages
- Use PRId16/32 for printing fixed-width signed integers
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify sample by relying exclusively on channel data from Devicetree.
This change makes sample simpler and more portable at the same time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is now possible to configure ADC channels in Devicetree. This makes
code more portable, since there is no need to hardcode hardware specific
bits in the C sources.
This patch adds channel/s configuration for all support sample overlays.
Hardcoded values have been used:
- Resolution: 12-bit
- Gain: 1
- Reference: internal
- Acquisition time: default
Some nRF channels have been adjusted to include resolution as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds to the usual qemu_x86_64 and qemu_cortex_a53 to
the entries for Sys-T catalog message in sample.yaml.
As the Sys-T backend has been updated to support 64-bit
for catalog messages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The BT tiny configuration has been removed some time ago,
but documentation has been still referencing it.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Recently OpenAMP introduced the possibility to set the sizes for TX and
RX buffers per created instance. Expose this also to Zephyr users by
using a DT property "zephyr,buffer-size".
For the sake of simplicity use the same DT property to set the buffer
size for both TX and RX buffers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Provided sample support for Telink tlsr9518adk80d board.
Set CONFIG_BT_TINYCRYPT_ECC=n (supported by BLE controller).
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
Set the TF-M profile type to none for TF-M integration samples.
If the default profile has been set to something else these samples may
fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adjusted Bluetooth parameters that have an impact on MTU and DLE
negotiation during a connection.
Enabled the Packet Reassembly feature from mcumgr libraries in the SMP
Server sample with the Bluetooth transport configuration. This change
should increase the overall throughput of the DFU process over
Bluetooth.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This PR adds a soft off mode to the RT10xx Power Management API.
Additionally, it corrects the PM API function in rt10xx_power.c to
use the correct function prototype to be properly overridden.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
The ISO security implementation works by verifying
against the acl (bt_conn) sec_level field. The
bt_conn sec_level field is only available
if CONFIG_BT_SMP is enabled, so this commit
adds guards for all ISO security checks as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is a follow-up to commit f5ffd05e6b.
Since twister removes leading spaces from received lines before
further processing, the regular expression for checking the output
produced by the sample cannot contain such space. Also negative
values read from ADC channels need to be allowed.
For consistency, remove the leading space also in the actual string
printed by the sample.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This dependency it is not required since majoprity of platforms are
working with new pinctrl API. This drops the pinmux dependency.
Fixes#46091
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit fixes the stale reference to the devicetree
`clock0@82005000` node, which was changed in the commit
7b601b7f50.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
off_t is often unsigned long, which means printf needs to use %lx. Insert
a cast in case the value is unsigned int.
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
As per 'Adding Secure Partition' in the TF-M documentation,
every secure partition must have a unique 32-bit partition ID.
If no value is provided, one will be auto-allocated by the
TF-M build system, but this can lead to unpredictable behaviour
in some cases. One example is key derivation where the partition
ID is used as part of the key derivation inputs. Different builds
can results in different PID values being assigned, resulting
in inconsistent key derivation output.
To avoid these problems, this commit sets a fixed PID as a
best pratice.
A value of 1000 has been set to place it within the
'PSA and user Partitions' range (256 - 2999) described in the
documentation.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Fix various board fixed-partition definitions where the devicetree cell
has been defined oddly, such as 9 nibbles (which makes no sense since
the cells are 32 bit) or 7 nibbles where all the others are 8.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The sample did not have defined pass condition and was failing
due to a timeout. Add harness: consol and an explicit regex matching
the sample's output so it can pass on a hw. In addition, a requirement
for a gpio_loopback fixture was added to the sample.yaml.
fixes: #45229
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The check did not properly check the info->flags as a bitfield,
and thus never decoded the data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Define the configuration through an overlay file
to run the sample on the nucleo_h743zi target board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It has been validated that the nucleo_h743zi board works correctly,
with '__nocache' buffers and data caches enabled, so this patch enables
support for the former.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Adds mps3_an547_ns to certain TF-M samples to improve
testing in CI by including the Arm Cortex-M55 platform.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Removes lpcxpresso55s69_ns from certain sample.yaml files due
to changes required for TF-M 1.6.0 not being added to the
upstream project before the 1.6.0 release.
The NXP SDK available for download from NXP contains the required
updates, but these will need to be committed to TF-M, then made
available in the Zephyr fork, at which point the yaml files here can
have the LPC added back.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Increases the scan and adv data sizes to better support
the extended advertising data and periodic advertising
data (BASE).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Clean up some of the board specific configuration files.
Removed all CONFIG_BT_CTLR* configs from the nRF5340
appcore conf files as that does not compile the controller.
Ensured that the ISO buffer in the controller for
nRF52840 can contain SDUs from all BAP LC3 minimum
requirements, as the controller does not yet
support segmentation of SDUs.
Also fixed a few bad configurations (broadcast sink not
enabling the sync support etc.).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add specific configuration and DTS overlay files for NUCLEO-H7A3ZI-Q
board to the littlefs example project. The second half of the SOC flash
is used as flash partition for littlefs.
Signed-off-by: Christoph Heller <chris@metanetics.de>
This commit changes the pointer type used in the philosophers demo to
`stack_data_t *` when stacks are used for synchronization purposes.
The previously used `void *` was causing AMO address-misaligned
exception on the HiFive Unleashed platform.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
On the stm32l073rz nucleo and stm32f091rc nucleo
boards, the DTS pwm-leds node is disabled, because
the output pin might conflict with SPI1.
It is necessary to enable the node in the overlay
to compile and run the sample.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Remove the explicit enable of Extended and Periodic
Advertising support in Controller, the feature is no
longer experimental in the Controller and is now enabled
by default when application uses them by enabling as
Host feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a call to bt_iso_chan_get_info for each CIS in the sample
to ensure that we don't attempt to send any data on a CIS
that is RX only.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
integration platforms can't be filtered out, adapt tests so that those
platforms are always available for testing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
integration platforms should not be in common section if we have
scenarios with different set of integration platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The lmp90100_evb sample included an implementation of double sqrt, and the
on_off_level_lighting_vnd_app sample included an implementation of float
sqrtf. Move that code into minimal libc instead of requiring applications
to hand-roll their own version.
Signed-off-by: Keith Packard <keithp@keithp.com>
The overlay for the nRF52840 DK board uses ADC controller child nodes
for specifying channel configurations and it shows how to configure
a channel in differential input mode, so it can serve as an example
of how to use these new possibilities. The overlay for the nRF51 DK
board shows how to use a specific ADC resolution (the default 12 bit
setting is not supported by nRF51 SoCs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
