Implement test cases:
LightweightM2M-1.1-int-303 - Cancel observations using Observe with
Cancel parameter
LightweightM2M-1.1-int-305 - Cancel Observation-Composite Operation
Modify existing Leshan API to passive_cancel().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Test case:
LightweightM2M-1.1-int-235 - Read-Composite Operation on root path
is now working as Leshan added a support for reading the root path.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement write and remove attributes command for Leshan.
Remove all written attributes at the end of test, so it won't
affect the next test case.
Remove skip marks from testcase that is fixed on Leshan side.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement testcases for Information Reporting Interface [300-399]:
* LightweightM2M-1.1-int-301 - Observation and Notification of parameter
values
* LightweightM2M-1.1-int-302 - Cancel Observations using Reset
* LightweightM2M-1.1-int-304 - Observe-Composite Operation
* LightweightM2M-1.1-int-306 – Send Operation
* LightweightM2M-1.1-int-307 – Muting Send
* LightweightM2M-1.1-int-308 - Observe-Composite and Creating
Object Instance
* LightweightM2M-1.1-int-309 - Observe-Composite and Deleting
Object Instance
* LightweightM2M-1.1-int-310 - Observe-Composite and modification of
parameter values
* LightweightM2M-1.1-int-311 - Send command
303 and 305 cannot be implemented using Leshan as it only support
passive cancelling of observation.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When testcases share one DUT per module, we save the time
from running bootstrap on each testcase.
Each testcase start with DUT that is registered.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement support for reading stream of events from Leshan.
This allows testing the LwM2M SEND/Notify/Update operations
and reading content of those.
Also convert the whole Leshan class to use requests.session() so
it pools up connections and uses keep-alive.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add remaining test cases from
Device management & Service Enablement Interface
* LightweightM2M-1.1-int-222 – Read on Object
* LightweightM2M-1.1-int-223 – Read on Object Instance
* LightweightM2M-1.1-int-224 – Read on Resource
* LightweightM2M-1.1-int-225 – Read on Resource Instance
* LightweightM2M-1.1-int-226 – Write (Partial Update) on
Object Instance
* LightweightM2M-1.1-int-227 - Write (replace) on Resource
* LightweightM2M-1.1-int-228 - Write on Resource Instance
* LightweightM2M-1.1-int-229 - Read-Composite Operation
* LightweightM2M-1.1-int-230 - Write-Composite Operation
* LightweightM2M-1.1-int-231 - Querying basic information
in SenML JSON format
* LightweightM2M-1.1-int-232 - Querying basic information
in SenML CBOR format
* LightweightM2M-1.1-int-233 - Setting basic information
in SenML CBOR format
* LightweightM2M-1.1-int-234 - Setting basic information
in SenML JSON format
* LightweightM2M-1.1-int-235 - Read-Composite Operation on root path
* LightweightM2M-1.1-int-236 - Read-Composite - Partial Presence
* LightweightM2M-1.1-int-237 - Read on Object without specifying
Content-Type
* LightweightM2M-1.1-int-241 - Executable Resource: Rebooting the device
* LightweightM2M-1.1-int-256 - Write Operation Failure
* LightweightM2M-1.1-int-257 - Write-Composite Operation
* LightweightM2M-1.1-int-260 - Discover Command
* LightweightM2M-1.1-int-261 - Write-Attribute Operation on a multiple
resource
* LightweightM2M-1.1-int-280 - Successful Read-Composite Operation
* LightweightM2M-1.1-int-281 - Partially Successful Read-Composite
Operation
Modify tests binary
* Allow CoAP payload of 1211 bytes.
* Allow outgoing messages to use block-wise if they are bigger.
* Use 4kB encode buffer for outgoing messages.
* Check configured heap and stack sizes.
* Limit number of interface addresses, sockets and contexts
Qemu-cortex-m3 platform ran out of RAM, so reconfigure it to use
* packet size of 256 bytes.
* encode buffer of 2kB
This exercises the block-transferring on some of the test cases.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
* Add support for running interoperability tests with
Qemu X86.
* Remove some debugging messages to allow binary to
fix Qemu Cortex-M3 board.
* Tune buffer and stack sizes to fit all boards.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Do not include the resource type (rt=) in the registration message when
using the OMA JSON format. This was a workaround specifically for the
Wakaama LwM2M server which is no longer needed since the latest master
branch.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Add case 'test_resend_request' to test that coap_client resends
the message if no response received.
Add response code check to case 'test_no_response'.
Initialize messages_needing_response[] in test setup.
Lower CONFIG_COAP_INIT_ACK_TIMEOUT_MS and decrease delays.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF where needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
When resource instances are initialized, we must calculate
beginning of the data buffer using the index and maximum
data length. Otherwise buffers would overlap with previous.
Fixes#64011
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Resend the request with Echo option and the received Echo
option value when receiving a 4.01 (Unauthorized) response
with the Echo option.
Add missing header file kernel.h to coap_client.h.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Only confirmable messages need pending tracking. Non-confirmable
messages are released after sending.
Match incoming packets with token, not message ID.
Ignore responses with non-matching tokens.
Remove unused function send_reset().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
In case observation token changes (the LwM2M server re-sends
observation request to the client), the LwM2M engine should cancel any
ongoing notifications based on the old token. Otherwise, it will be
impossible to match the pending notification reply (ACK) with the
observer context anymore, causing new notifications for this
observation to stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added a new event for LWM2M_RD_CLIENT_EVENT_DEREGISTER for
indicate LwM2M client dereistartion.
Updated unit test and sample for new event type
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
lwm2m_udp_receive() is only called with same function
pointer, so there no need to carry that in the parameter.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Use the new Pytest integration to run testcases against Leshan.
Test with:
twister -T tests/net/lib/lwm2m/functional -p native_posix -vv
This requires Leshan running in localhost using following setup:
tcp/8080 Leshan web interface and REST API
tcp/8081 Leshan bootstrap server REST API
udp/5683 Leshan non-secure CoAP
udp/5684 Leshan DTLS CoAP
udp/5783 non-secure Bootstrap CoAP
udp/5684 DTLS Bootstrap CoAP
Leshan and Boostrap server must be reachable from native_posix
run using IP address 192.0.2.2 as in most of the examples.
Tests are written from test spec;
OMA Enabler Test Specification (Interoperability) for
Lightweight M2M
Following tests are implemented in this commit:
* LightweightM2M-1.1-int-0 – Client Initiated Bootstrap
* LightweightM2M-1.1-int-1 – Client Initiated Bootstrap Full (PSK)
* LightweightM2M-1.1-int-101 – Initial Registration
* LightweightM2M-1.1-int-102 – Registration Update
* LightweightM2M-1.1-int-104 – Registration Update Trigge
* LightweightM2M-1.1-int-105 - Discarded Register Update
* LightweightM2M-1.1-int-107 – Extending the lifetime of a registration
* LightweightM2M-1.1-int-108 – Turn on Queue Mode
* LightweightM2M-1.1-int-109 – Behavior in Queue Mode
* LightweightM2M-1.1-int-201 – Querying basic information in Plain Text
* LightweightM2M-1.1-int-203 – Querying basic information in TLV format
* LightweightM2M-1.1-int-204 – Querying basic information in JSON format
* LightweightM2M-1.1-int-205 – Setting basic information in Plain Text
* LightweightM2M-1.1-int-211 – Querying basic information in CBOR format
* LightweightM2M-1.1-int-212 – Setting basic information in CBOR format
* LightweightM2M-1.1-int-215 – Setting basic information in TLV format
* LightweightM2M-1.1-int-220 – Setting basic information in JSON format
* LightweightM2M-1.1-int-221 – Attempt to perform operations on Security
* LightweightM2M-1.1-int-401 – UDP Channel Security – PSK Mode
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Avoid to use debug log level for all modules and keep it only for MQTT
and NET related modules.
mr_canhubk3 board will fail to initialize the on-board watchdog within
the expected window causing a board reset, due to the amount of log
messages being printed. Other boards may also be affected.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The tests `content_json` and `content_plain_test` depend on the float
support of libc. After PR##57340, Picolibc would be selected in
these two tests and the `PICOLIBC_IO_FLOAT` won't be selected if
the platform doesn't select `FPU`.
This commit select `CONFIG_PICOLIBC` and `CONFIG_PICOLIBC_IO_FLOAT`
for these two tests.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
RD client tests work well on emulated (fast) environments
but tend to fail on real HW with real time sleeps.
This change refactors wait_for_service() to be a bit more
syncronous on background service, instead of relying hardcoded
sleeps.
Fixes#61824
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This test is too dependent on the exact order of events,
and known to fail in most platforms but native_posix.
To mitigate the issue and avoid blocking development
due to failed CI tests, let's only allow the test in
native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add module tests for all data types and most of deprecated
functions as well.
Refactor event wainting to expect_lwm2m_rd_client_event() which
does not care about the index, just the order.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The provided function allows to remove a CoAP option in a
message. This is useful for reusing parts of a message.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
RD-client tests should wait longer for expected events.
Also the stubbed service worker should be stopped properly
after tests.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When BOOTSTRAP FINNISH message was received, it caused
engine to immediately switch to BOOTSTRAP_TRANS_DONE state
which then closed the connection.
Ack packet was still on the send-queue so it never got send before close().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fix a build warning that is generated by new
enough compilers, when they detect the sprintf()
may overflow the destination buffer lenght.
The code which was generating the warnig was
actually not used, so we just remove it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These testcases are not SMP-safe, will fail on all SMP boards. Simply
turning them to 1cpu test can not fix the issue.
So, setting CONFIG_MP_MAX_NUM_CPUS to 1 as a workaround.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Allow socket-loop to wake up immediately, if there are changes,
instead of waiting for zsock_poll() to timeout.
This change makes engine more reactive and removes
hard coded timeout from zsock_poll().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
