Moving from APPLICATION level to POST_KERNEL and keeping both parent and
child on the same level is causing problems, so fix this by putting them
on different priorities in POST_KERNEL.
Also, this sample runs fine in qemu, so make it the integration
platform.
Fixes#62772
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some tests provide their own PM hooks, adapted for testing purposes. Add
a new option to select HAS_PM, so that CONFIG_PM can be enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Even though we have unit tests that cover the PM policy latency APIs, it
may not be obvious on how to use it in practice. This patch adds a new
sample where both the application and a device driver impose latency
requirements. The sample illustrates how latency requirements are
aggregated and are taken into account when choosing the CPU power state.
The test has been designed to run on native_posix, since it only serves
for demonstration purposes.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Both drivers enable device runtime on init, so they will be suspended
in the very beginning. The async get operation no longer exists, so
just remove the message related with this.
Fixes#42740
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In order to align with macros used to obtain a device reference (e.g.
DEVICE_DT_GET), align the PM macros to use "GET" instead of "REF". This
change should have low impact since no official release has gone out yet
with the "REF" macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change the function pm_device_runtime_enable() to return 0 on
success or an error code in case of error.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PM callback is no longer referenced as "pm_control" but
"pm_action_cb", so reflect this new naming on the callbacks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM device runtime API calls from pm_device* to the
pm_device_runtime* namespace.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After the removal of pm_device_get_async, the pm_device_wait API has
become redundant. Its usage after pm_device_put_async should not be
considered a valid usecase, since after that call what will happen is a
pm_device_get (which is blocking).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As of today there is no clear usage of asynchronous gets, since in
general, a resume operation should be synchronous (we are about to use
the device immediately after resuming it). Removing this API simplifies
the runtime implementation in a significant way (refer to future
commits).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Uses the stats subsys to provide simple but useful debugging stats for
power management state changes and timing.
Removes the no longer needed PM_DEBUG config option
Replaces the use of PM_DEBUG for a test clock output pin for mec1501 and
adds in its place an SoC Kconfig option to enable it.
Adds a STATS_SET macro for assigning a value to a stat group field
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Most APIs have the default synchronous and an asynchronous version
with the sufix _async because that is the most common use.
All devices in tree right now are using the synchronous version, so
just change it to be consistent with the rest of the system.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since we are using mutex to protect critical sections and mutexes are
reentrant, it is possible to get rid of atomic for the state because
we can lock the mutex in device_pm_callback.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Changing from spinlock to mutex makes the running thread be preempted
and the workqueue ran. This changed the prints order in this sample.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
"child resuming" text is printed when dummy_device_pm_ctrl is
called. The driver is using the async api, this means that this call
will happen only when the worqueue runs what will happen only when
this thread blocks waiting on the conditional variable.
The last thing is, the dummy driver was putting the parent driver
asynchronously consequently the "parent suspending" message would just
print after "Device PM sample app complete". Just use the sync API to
get these messages printed in the expected order.
Fixes#35336
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The sync API was using k_poll_signal and in certain conditions is
possible multiple threads waiting on a signal leading to an undefined
behavior.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use `pm_device_*` prefix for the device runtime PM API. This adds the
API to the `pm` namespace, making it clear part of the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
