Enable the remaining samples which run now in native_posix also
in native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This patch allow demonstrating fat_fs sample application on
stm32h747i-disco board with SD card.
Build fs_sample using following command
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/fs_sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
For littleFS, the fstab entries in DTS are ignored currently.
So remove the overlay entries for the same. Also fixed-partitions
can't be used for sdmmc-disk. So remove the same. We just need to
have sdmmc node with zephyr,sdmmc-disk compatible string to have
littleFS working on disk.
build littleFS sample as follows:-
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf \
-DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
This adds the required conf and dts overlays required for the
application on stm32h747i-disco board.
Also moved CONFIG_SDMMC_STM32_HWFC option from prj_blk.conf to
nucleo_h743zi_blk.conf as that is STM specific option.
Build the application as
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf -DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
This migrates the subsys code samples to the new Sphinx code-sample
extension, making it easier to find relevant samples when browsing
API reference.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Rework RAM disk driver to be configured using devicetree and
support multiple instances.
This patch also removes a copy of the RAM disk driver,
tests/subsys/fs/fat_fs_dual_drive/src/disk_access_test_drv.c,
that was there for testing multiple disk drivers support.
Bonus: one SYS_INIT() less and a memory region can be exported to the
host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use the new code-sample directive and roles to document the filesystem
samples so that they show up as "Related samples" when browsing the API
documentation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The LittleFS sample may be used for both SDMMC and MMC disk drivers,
so make it possible to work with different volume disk driver names.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
We don't need anymore enabling of Flash map for building littlefs
sample with block disk device config.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Disable various samples because they require certain digital signals
from the Arduino header, which are not connected when the board is
shipped and therefore not defined via the connector gpio-map.
Signed-off-by: Stephan Linz <linz@li-pro.net>
With the minimal C library malloc implementation moving to libc/common, all
of the related Kconfig variables have also changed. Update uses within the
tree.
Signed-off-by: Keith Packard <keithp@keithp.com>
Make it possible to use CPOL/CPHA SPI clock modes with the SDHC driver.
Some cards require the clock to switch to low when not active.
Signed-off-by: Łukasz Hejnak (LeHack) <lehack-ghub@lehack.pl>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
The sample now support's setting up FAT FS on devices without
SD card access and this new ability requires update in documentation.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commits adds Kconfig option CONFIG_SAMPLE_FATFS_CREATE_SOME_ENTRIES
which causes the sample to attempt to create one file and one
directory, in case if listing does not show anything, just
to demnonstrate how FAT FS operations work on internal flash.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commits adds support for nrf52840dk_nrf52840 with two additional
configurations:
- with FAT FS on internal SoC flash
- with FAT FS on QSPI connected MX25
In case of SoC configuration there is re-configuration of internal
partitions done, doe to need for at least of 64kiB for FAT FS.
The QSPI configuration only defines additional partition on
external device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
LPC55S69 flash requires all writes be in multiples of 512 byte blocks.
Configure littleFS sample for these requirements when building targeting
the LPCXpresso55s69 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support to run the sample on nrf52840dk_nrf52840 using
internal SoC flash, and external mx25 device over QSPI or SPI.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes the overlay file for running the
samples/subsys/fs/littlefs on the nucleo_h743zi platform.
The storage_partition is moved to the qspi_nor flash
instead of the internal flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The FRDM-K64F board has a SD/MMC slot. This patch modifies the DTS
files so that this feature works out of the box. This includes
configuring the SPI peripheral connected to the slot on the board.
This change follows the SD/MMC support for other boards, e.g.
Olimexino-STM32. It was tested on a FRDM-K64F board with the
fat_fs sample.
Signed-off-by: Marek Materzok <tilk@tilk.eu>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- update device tree pin states definitions and node
descriptions to group pins sharing common properties.
- update fat_fs sample code overlay.
- remove unused ledc pin states
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Some of the Panasonic's evaluation boards have limited amount of pins.
So not all arduino pins can be occupied and not all shields are
compatible.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It has been validated that the nucleo_h743zi board works correctly,
with '__nocache' buffers and data caches enabled, so this patch enables
support for the former.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add specific configuration and DTS overlay files for NUCLEO-H7A3ZI-Q
board to the littlefs example project. The second half of the SOC flash
is used as flash partition for littlefs.
Signed-off-by: Christoph Heller <chris@metanetics.de>
The goal of this commit is to update existing STM32 boards descriptions
to use these size "DT_SIZE" macros to enhance readability. To realize this
i used a python script, which will detect the STM32 Boards
/zephyr/board/arm, and then will update in the dts files the partition
description using "DT_SIZE_K" and "DT_SIZE_M" macros.
Check manually and modify in .overlay files in samples and tests.
Signed-off-by: TLIG Dhaou <dhaou.tlig-ext@st.com>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
