To avoid complicating the initial code for supporting the SoC,
I have implemented only the bare minimum for now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Introduce an interrupt controller for the NXP S32 WKPU peripheral
that can be integrated with GPIO to trigger interrupts through
external interrupt pad inputs.
WKPU can trigger interrupts from certain input pads that support this
function, as well as wake-up events to the power management domain. This
patch only adds WKPU functionality as an interrupt controller to extend
the number of input pads that can interrupt the core. Power management
functionalities are not supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Removing the edge-trigger Kconfig as it is supported by default
in the RISCV PLIC specifications.
Define the edge-trigger register offset in the driver instead
of retrieving the value from devicetree as it is not something
configurable. The value 0x1080 is defined in Andes & Telink
datasheets.
Updated build_all testcase.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add TI VIM (Vectored Interrupt Manager) interrupt controller support.
VIM is a TI specific custom interrupt controller for ARM cores.
In J721E soc, VIM aggregates interrupts to Cortex R5 cores.
TRM for J721e https://www.ti.com/lit/zip/spruil1
File: spruil1c.pdf
VIM: section 6.3.3.6
Signed-off-by: Prashanth S <slpp95prashanth@yahoo.com>
As per #26393, Local APIC is using Kconfig based option for
the base address. This patch adds DTS binding support in the driver,
just like its conunter part I/O APIC.
Signed-off-by: Umar Nisar <umar.nisar@intel.com>
Add mailbox and interrupt-controller nodes used for
inter-process communication.
Add also the dt binding for the interrupt-controller.
For now, this is used just to fix some compile errors,
since the mailbox requires an interrupt-controller.
For DSP, we have a direct interrupt line to the core.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
SIUL2 may require multiple interrupt handlers instead of a single one as
currently supported for S32Z/E. This is needed to enable support on
S32K3.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Currently, only the presence of a GIC is reflected in the device tree,
and its version must be set separately in each SoC's Kconfig.
This patch adds separate bindings for each GIC version whose presence
in the device tree automatically enables the corresponding Kconfig symbol.
Signed-off-by: Piotr Wojnarowski <pwojnarowski@antmicro.com>
When the GIC driver was originally introduced, it was only used on
Cortex-R SoCs. However, this is not the case anymore. Update the
description to reflect that this driver is not specific to Cortex-R.
Signed-off-by: Piotr Wojnarowski <pwojnarowski@antmicro.com>
Introduce PINT driver, for NXP pin interrupt and pattern match engine.
The driver currently supports only the pin interrupt feature of the
PINT.
Add DTS entires for the PINT on LPC and RT devices that support this
peripheral, and remove the interrupt defintions that are PINT specific
from the GPIO module on these devices.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds the new stm32h5 serie to the list of st,stm32g0-exti
compatible : now the matching targets is C0/G0/H5/U5/L5/MP1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add 2 properties in STM32 external interrupt controller:
- num-lines
- line-ranges
Additionally, make interrupt-names a required property.
The properties will help to simplify exti init code in building the
exti_irq_table and simplify the isr related bits.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In Infineon XMC4XXX SoCs, gpio interrupts are triggered via an
Event Request Unit (ERU) module. A subset of the gpios are
connected to the ERU. The ERU monitors edge triggers and creates
a SR.
This driver configures the ERU for a target port/pin combination
for rising/falling edge events. Note that the ERU module does
not generate SR based on the gpio level. Internally the ERU
tracks the *status* of an event. The status is set on a positive
edge and unset on a negative edge (or vice-versa depending on
the configuration). The value of the status is used to implement
a level triggered interrupt; The ISR checks the status flag and
calls the callback function if the status is set.
The ERU configurations for supported port/pin combinations are
stored in a devicetree file dts/arm/infineon/xmc4xxx_x_x-intc.dtsi.
The configurations are stored in the opaque array
uint16 port_line_mapping[].
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
DTS property attributes are (by default) not required.
Explicitly specifying `required: false` is redundant.
Perhaps a warning to that effect would be useful.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Add initial support for the NXP S32Z27 SIUL2 External
Interrupt Controller. Each SIUL2 node has a child node
will act as an interrupt-controller that processes external
interrupt signals.
This driver is required to manage GPIO interrupts.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
All in tree device drivers use some form of DEVICE_DT_GET
so we no longer need to require label properties.
Signed-off-by: Kumar Gala <galak@kernel.org>
All in tree device drivers use some form of DEVICE_DT_GET
so we no longer need to require label properties.
Signed-off-by: Kumar Gala <galak@kernel.org>
The armv8 timer, arm gic, and arm gic-v3-its don't use or need the
devicetree label property. Update the dts bindings to not require it and
remove setting of the label property in dts files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add DT bindings for the optional Interrupt Translation Service module
of the ARM GICv3 Interrupt Controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
These IP blocks' vendor is Cadence, whose proper vendor prefix is
'cdns' if we are going to match the Linux vendor prefixes list.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
As far as I can tell, 'vexriscv' does not name a vendor:
https://github.com/SpinalHDL/VexRiscv
It also doesn't seem entrenched enough to merit a special case
exception to the de factor rule 'the "vnd,foo" namespace is for
vendors'. This is open to debate and we can revise as needed in the
future, but for now let's just rename the compatible to avoid
triggering warnings/errors about unknown vendors.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add driver implementation and header files for a MEC172x
aggregated interrupt driver. Enable the parent(ECIA) node
to have the driver initialize interrupt hardware for use.
Enable child nodes for those GIRQs used for aggregation.
Refer to chip documention for the list of GIRQs restricted
to aggregation and those which support direct mode.
Add chip level device tree node for MEC172x EC interrupt
aggregator parent and GIRQ children. Each child node contains
a list of sources representing the source bit position in the
GIRQ registers.
Add DT bindings for ECIA and GIRQ nodes.
Add build file(s) and configuration items for the MEC172x ECIA
aggregated interrupt driver. Add and enable the MEC172x interrupt
driver on the MEC172x evaluation board(EVB). Enable parent node to
initialize ECIA hardware. Child nodes are left disabled until a
future driver needs them.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Fixed the name of nodes in in espi-vw, miwu-wui, and miwu-int
device-tree node. This CL fixed missing nodes in CL d3a94fa8ab.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add initial support for the Cortex-M55 Core which is an implementation
of the Armv8.1-M mainline architecture and includes support for the
M‑profile Vector Extension (MVE).
The support is based on the Cortex-M33 support that already exists in
Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
PSoC-6 SoC needs that user define the nvic interrupt number to bind
with the peripheral interrupt line for the Cortex-M0+ CPU. It uses
a multiplex before any NVIC interrupt line. The interrupt vector is
selected using interrupt-parent property with the intmux_chN number
reference.
Note: The PSoC-6 SoC allows that both CPUs receive the same interrupt.
A tipical use is GPIO interrupt handle and user is responsable to
define interrupt line, priority and take care of enable same peripheral
instance on both CPUs only when appropriated.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
This patch adds IRQ priority support for SiFive PLIC by device-tree.
Some IRQ sources of plic use Kconfig to set priority of their IRQ.
- AON: no driver
- I2C, SPI, PWM: not use IRQ
- GPIO, UART: default 1
So this patch specifies IRQ priority 1 for all sources.
Currently these drivers (gpio and uart) do not support that they get
and use IRQ priority from device-tree. We need more patches.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This commit is about it8xxx2 platform device tree.
Add driver's binding files, and one device tree as sample.
Signed-off-by: Cheryl Su <cheryl.su@ite.com.tw>
It is put into interrupt controller since it expands some capabilities
of existing interrupt controllers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently there is no binding for RISC-V Core-Local Interruptor.
This patch add a simple binding.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This adds support for the GRLIB IRQMP interrupt controller commonly used
in LEON3/4/5 systems.
The driver supports the 15 SPARC interrupts and 16 extended interrupts.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The device Multi-Input Wake-Up Unit (MIWU) supports the embedded
controller (EC) to exit 'Sleep' or 'Deep Sleep' power state which allows
chip has better power consumption. Also, it provides signal conditioning
such as 'Level' and 'Edge' trigger type and grouping of external
interrupt sources of NVIC. The NPCX series has three identical MIWU
modules: MIWU0, MIWU1, MIWU2. Together, they support a total of over 140
internal and/or external wake-up sources.
In this CL, we use device tree files to present the relationship bewteen
MIWU and the other devices in different npcx series. For npcx7 series,
it include:
1. npcx7-miwus-int-map.dtsi: it presents relationship between MIWU group
and NVIC interrupt in npcx7. Please notice it isn't 1-to-1 mapping.
2. npcx7-miwus-wui-map.dtsi: it presents relationship between input of
MIWU and its source device such as gpio, timer, eSPI VWs and so on.
This CL also includes:
1. Add MIWU device tree declarations.
2. MIWU api function declarations and implementation to configure signal
conditions and callback function mechanism. They can be be classified
into two types. One is for GPIO which connects original gpio callback
implemetation and the other is for generic devices such as timer,
eSPI, and so on.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
DesignWare driver can manage different amount of irqs so let's make it
configurable via DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add any useful information from 'title:' to the 'description:' strings
(e.g. explanations of acronyms), and remove 'title:' as well as any
copy-pasted "this binding gives a ..." boilerplate.
Also clean some description strings up a bit.
Some other things could probably be cleaned up (replacing 'GPIO node'
with 'GPIO controller' on controllers for consistency, for example), but
I kept things close to the original to avoid accidentally messing up.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The GIC-400 driver currently only supports SPIs because the (32) offset
for the INTIDs is hard-coded in the driver. At the driver level there is
no really difference between PPIs and SPIs so we can easily extend the
driver to support PPIs as well.
This is useful if we want to add support for the ARM Generic Timers that
use INTIDs in the PPI range.
SPI interrupts are in the range [0-987]. PPI interrupts are in the range
[0-15].
This commit adds interrupt 'type' cell to the GIC device tree binding
and changes the 'irq' cell to use interrupt type-specific index, rather
than a linear IRQ number.
The 'type'+'irq (index)' combo is automatically fixed up into a linear
IRQ number by the scripts/dts/gen_defines.py script.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add support for the built-in Programmable Interrupt Controller
found in the SweRV EH1 RISC-V CPU
Signed-off-by: Olof Kindgren <olof.kindgren@gmail.com>
