Fixes the "rc" text to include that it can also be returned when
SMP version 2 is used to indicate an SMP error instead of a group
error.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Refer to the native_sim overlay instead of the native_posix one,
as native_posix is going to be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Another round of repeated words cleanup. This commit tries to keep the
diff minimal and line wrapping was mostly left intact in the touched
files, as having them consistent across the documentation is probably
the topic of a future tree-wide cleanup (or not)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a input_kbd_matrix doxygen group and add this to the other Input
APIs page, add few missing argument documentation entries.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In the docs replace the references to native_posix with native_sim.
In the sample, add overlays for native_sim, and add native_sim to filter
and as default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The examples in the RTIO docs were nice but continuously became out of
date without being updated. This is unfortunately the downside of
doc-only samples like this.
Some real, buildable, samples right be better but will take a little
time to write up. In the meantime drop the examples in the docs to avoid
confusion.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The icmsg and icmsg_me backends has limitations in context of
concurrent access to single instance. Some limitations are:
* sending by more thread at the same time may cause -EBUSY
* allocating TX buffer will cause errors in other threads that want
to allocate before first thread sent the message,
* during no-copy receive, when RX buffer is on hold receiving is
totally blocked.
This backend resolves those limitations by adding dynamically allocated
buffers on shared memory next to ICmsg circular buffer. The data is
passed using those buffers, so concurrency is not a problem. The ICmsg
is used only to pass short 2-byte messages containing references to
those buffers. The backend also supports multiple endpoint.
The ipc/icmsg_me sample was modified to support this backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
Function prototype in PM device implementation documentation had the
incorrect prototype for device power management. Fix this to align
with the correct prototype.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adding support for echo option if telnet commands are supported. This is
useful when the telnet client is in character mode. It allows to use the
arrow keys, ctrl-c and more. Something to keep in mind is that when
character mode is turned on by the client, network traffic is
considerably increased as each typed character is sent over the wire.
Note: echo mode is only supported if SHELL_TELNET_SUPPORT_COMMAND is
enabled.
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
The figure and table related to the VDED notification sequence were wrong.
It fixes that by changing the image and adjusting the table content.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Remove gdbstub sample (samples/subsys/debug/gdbstub) as duplicated
by a test (tests/subsys/debug/gdbstub).
Update the GDB stub documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fixed a few occurrences of incorrect references to Kconfig options
(missing the CONFIG_ prefix)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add documentation for the new way to storage observers, the message
subscribers, and the confirmed message sample.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Adds a note on how to configure and what to beware of when
disabling mutex support in a multithreading application
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Specification for MCUmgr OS group command allowing to query
for bootloader information.
Provide information on supported MCUboot parameters query by MCUmgr
group OS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The list of user-defined functions in "User-Defined Tracing" section was
not properly formatted (missing blank line).
Switched the (broken) list to a code block to now provide C syntax
highlighting.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
In Zephyr, this is let to the disk access API user. There is nothing the
driver can do about it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This migrates the subsys code samples to the new Sphinx code-sample
extension, making it easier to find relevant samples when browsing
API reference.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use the new code-sample directive and roles to document the networking
samples so that they show up as "Related samples" when browsing the
various relevant networking APIs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This is the final step in making the `zephyr,memory-attr` property
actually useful.
The problem with the current implementation is that `zephyr,memory-attr`
is an enum type, this is making very difficult to use that to actually
describe the memory capabilities. The solution proposed in this PR is to
use the `zephyr,memory-attr` property as an OR-ed bitmask of memory
attributes.
With the change proposed in this PR it is possible in the DeviceTree to
mark the memory regions with a bitmask of attributes by using the
`zephyr,memory-attr` property. This property and the related memory
region can then be retrieved at run-time by leveraging a provided helper
library or the usual DT helpers.
The set of general attributes that can be specified in the property are
defined and explained in
`include/zephyr/dt-bindings/memory-attr/memory-attr.h` (the list can be
extended when needed).
For example, to mark a memory region in the DeviceTree as volatile,
non-cacheable, out-of-order:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_VOLATILE |
DT_MEM_NON_CACHEABLE |
DT_MEM_OOO )>;
};
The `zephyr,memory-attr` property can also be used to set
architecture-specific custom attributes that can be interpreted at run
time. This is leveraged, among other things, to create MPU regions out
of DeviceTree defined memory regions on ARM, for example:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-region = "NOCACHE_REGION";
zephyr,memory-attr = <( DT_ARM_MPU(ATTR_MPU_RAM_NOCACHE) )>;
};
See `include/zephyr/dt-bindings/memory-attr/memory-attr-mpu.h` to see
how an architecture can define its own special memory attributes (in
this case ARM MPU).
The property can also be used to set custom software-specific
attributes. For example we can think of marking a memory region as
available to be used for memory allocation (not yet implemented):
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_NON_CACHEABLE |
DT_MEM_SW_ALLOCATABLE )>;
};
Or maybe we can leverage the property to specify some alignment
requirements for the region:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_CACHEABLE |
DT_MEM_SW_ALIGN(32) )>;
};
The conventional and recommended way to deal and manage with memory
regions marked with attributes is by using the provided `mem-attr`
helper library by enabling `CONFIG_MEM_ATTR` (or by using the usual DT
helpers).
When this option is enabled the list of memory regions and their
attributes are compiled in a user-accessible array and a set of
functions is made available that can be used to query, probe and act on
regions and attributes, see `include/zephyr/mem_mgmt/mem_attr.h`
Note that the `zephyr,memory-attr` property is only a descriptive
property of the capabilities of the associated memory region, but it
does not result in any actual setting for the memory to be set. The
user, code or subsystem willing to use this information to do some work
(for example creating an MPU region out of the property) must use either
the provided `mem-attr` library or the usual DeviceTree helpers to
perform the required work / setting.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Key combinations described using the sphinx :kbd: role should not have
a white space around + sign
i.e. should be :kbd:`Ctrl+d` not :kbd:`Ctrl + d`
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Updated basic samples READMEs to use the new zephyr:code-sample::
directive. Dropped "-sample" suffix that's not required anymore now
that samples have their own namespace.
- Updated all references to the samples to use the :zephyr:code-sample:
role. Checked and updated the wording of said references to account
for the fact that samples should not have "... sample" in their name
anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use the new code-sample directive and roles to document the zbus samples
so that they show up as "Related samples" when browsing zbus API.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add details of the new VDED sequence;
Change the function iterators documentation considering `user_data`;
Adjust the runtime observers' allocation information. Now it uses heap
instead of memory slabs;
Adjust the configuration list and details of it.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
- Updated TFM v1.4 to v1.8
- Delete the TFM "Audit log" service, as it was removed from TFM.
- Delete not used secure service abbreviations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add support for SPI host command backend for STM32 chips family.
Unfortunately, the current SPI API can't be used to handle the host
commands communication. The main issues are unknown command size sent
by the host(the SPI transaction sends/receives specific number of bytes)
and need to constant sending status byte(the SPI module is enabled and
disabled per transaction). Thus the SPI backend includes basic SPI STM32
driver adjusted to host command specification.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
This is a stable API treewide change changing the newly introduced
"ret" response to "err" as it was overlooked that the shell_mgmt
group already used "ret" to return the exit code of the command
and this created a collision. Since SMP version 2 was only recently
introduced, there should not be any public implementations of it
as of yet, but the original function has been kept and marked as
deprecated.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The simple executor was removed with the usage of the spsc queue but
some stray references remained. Remove those.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
