The tests overflowed system workqueue stack slightly when running on
nRF52840, increase the stack size globally for the tests to avoid
potential issues on other platforms as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The setting is deprecated so change the code to either use the
native zsock_* API or enable POSIX_API to use the BSD socket API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix build for nrf5340dk_nrf5340_cpuapp_ns.
Test takes up almost all of the flash, leaving no room for the image
to be signed. Disable the bootloader to free up flash-usage.
Fixes: #66469
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Verify that TCP keep alive options can be set properly and that TCP
connections time out correctly when keep-alive probes fail to get
replies.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF where needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
For some reason, tests/net/socket/tcp/net.socket.tcp.preempt
was failing to link for vmu_rt1170 with these changes, and
for some reason reducing CONFIG_POSIX_MAX_FDS from 20 to 10
resolves that issue.
ld.bfd: scripts/build/gen_kobject_placeholders.py \
did not reserve enough space for kobject rodata.
Memory region Used Size Region Size %age Used
FLASH: 287860 B 64 MB 0.43%
RAM: 86460 B 512 KB 16.49%
OCRAM: 0 GB 256 KB 0.00%
OCRAM1: 0 GB 512 KB 0.00%
OCRAM2: 0 GB 512 KB 0.00%
ITCM: 0 GB 256 KB 0.00%
DTCM: 13908 B 256 KB 5.31%
IDT_LIST: 0 GB 2 KB 0.00%
collect2: error: ld returned 1 exit status
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Accidentally statements to enable logging in the TCP socket test
where pushed. This broke some tests running on real devices due
to the additional code size.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
To avoid a TCP connection from collapsing a link, implement a collision
avoidance algorithm. Initially TCP new Reno is implemented for its
simplicity.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Set explicit loopback MTU for TCP tests for clarity,
and to avoid breaking tests if changed elsewhere.
Signed-off-by: Kenny Johansson <wirehell@gmail.com>
There is a test case which verifies that no new packets show up on the
interface, assuming that the only source of the packets is TCP stack.
ND protocol could interfere with that assumption, sending
advertisements.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After several fixes of the re-ordering logic in TCP, the receive queue
works as intended and cleans itself up properly. Previously the default
timeout was 100 ms, which pretty much disables it for real applications.
Increase the timeout to 2 seconds to actually enable it for in practice.
This should help pass much more of the Maxwell Pro tests.
This is the first step before removing the timeout completely.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
As the TCP test suite is intended to run over loopback interface, use
loopback addresses and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When the NO_DELAY option is enabled, the retransmitted packets
will likely be differently broken down from the packets transmitted
initially. This provides a nice stress test for the out or order
reception logic.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Instead of waiting for the retransmit timeout, retransmit as soon as
missing data is deduced based on a triple-duplicate ACK.
Increase the number of buffers in the testcase, to allow for at least 4
packets in flight to trigger the triple-duplicate ACK.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
It can happen that two similar stacks enter a retransmission cycle
due to a packet collision. If the transmission timeout is the same
both stacks will retry at the same moment resulting in another
collision.
By introducing a randomized retry timeout, the chance of
a second collision is reduced and it reduces furter the more
retransmissions occur.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
A reproducible case to the behavior when during a connection
the link gets broken and all data is lost, the TCP connection
should properly terminate.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
When there is no response from the server, a client side connect
should return a ETIMEOUT. This tests breaks the connection and validates
this behavior.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
A reproducible case to see what happens when the TCP stack runs out
of buffers. It transfers a block, bigger then the number of buffers
available.
Also test by introducing packet loss in the loopback driver.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Since the loopback driver makes use of the RX packet pool now, adjust
the packet count for the test.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Enable the loopback driver and set up network testing so that it
will not require a SLIP driver. Move values from the extra test
config so that they are always enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
- Test ipv4/ipv6 send() and recv().
- Test ipv4/ipv6 sendto() and recvfrom().
- Test ipv4/ipv6 sendto() and recvfrom() with NULL dest address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
