The set size can now be dynamically set and notified.
The rank is added as a argument in the case that changing
the set size, also affects the device's rank, as ranks
in a coordinated set needs to be continuous.
The set coordinator implementation has been updated
to support receiving the new set size, and providing
this information to the upper layers.
This commit adds a babblesim test for the new API,
as well as a shell command.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a selection of interval values that are suitable for BAP,
which will allow better coexistence between ISO and ACL,
for both broadcast and unicast. Some of these are defined
by the BAP spec, and some are defined by Zephyr, since they
do have a suggested value from BAP.
Samples and tests have been updated to use these new values.
Peripheral samples have also been updated with
CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS so that the connection
parameters from the centrals aren't updated to something else
shortly after.
The shell has also been updated to use the LE Audio (BAP) values
if audio is enabled, and the audio.conf file has disabled automatic
updating of the connection parameters as the peripheral, as we rarely
(if ever) want to do that.
Due to the connection interval change, CI hit an issue
with test_bass_broadcast_code in test_main_client_sync, where
the reading of the long receive state did not finish before we
attempted to do another procedure, so the function was updated to have
a retry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast server does not need GATT caching and it was likely
incorrectly added earlier as a dependency.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since now Mbed TLS automatically selects ENTROPY_GENERATOR (or the
test generator, depending on the platform) we can remove this dependency
from all BT related tests and samples.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Change the select of BT_PER_ADV_SYNC and BT_EXT_ADV to
depends on. This is an effort to reduce the use of
select for Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP Kconfigs option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Changed dependency of the BT_BAP_SCAN_DELEGATOR to GATT_DYNAMIC_DB
from 'select' to 'depends on' and solved all loop dependencies
caused by this change.
Fixes#79108
Signed-off-by: Babak Arisian <bbaa@demant.com>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Do not enable BT_HAS_PRESET_CONTROL_POINT_NOTIFIABLE as it
depends on EATT which isn't enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The configuration file is mostly tested for the nRF53 series
where the controller configuration is usually from the
hci_ipc sample.
This means that the existing audio.conf before this commit
has not really been tested for audio, and were missing a few
configurations to make it work properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
EATT is not properly used by LE audio nor is the
Zephyr implementation very good, so disable for now
or at least until the BSIM tests are passing with it
enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the supported receive state count to 4, as
several on-market device have at least 2 and sometimes
more.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Broadcast Assistant API should be fully independent of the scan
delegator. Therefore the new struct bt_bap_bass_subgroup has been
defined to avoid a dependency.
Fixes: #68338
Signed-off-by: Ping Wang <pinw@demant.com>
PBP API allows sources to create a Public Broadcast Announcement.
PBP API to parse a Public Broadcast Announcement.
public_broadcast_source application starts extended advertising and
includes a Public Broadcast Announcement. The advertised broadcast
audio stream quality will cycle between high and standard quality.
public_broadcast_sink application scans for broadcast sources and
synchronizes to the first found source which defines a Public Broadcast
Announcement including a High Quality Public Broadcast Audio Stream
configuration.
Add bsim tests for Public Broadcast Profile APIs.
Add shell implementation for Public Broadcast Profile APIs.
Signed-off-by: Daniela Andreea Dumitrache <danielaandreea.dumitrache@nxp.com>
Why?
- metadata is easier to manage as an array + index
- less error-prone -> less memory-management bugs
- we can. because of the previous refactor
- PDU allocations are more predictable
- ATT buffer size can be optimized by app
- isolates ATT from the rest of the ACL users
- decouples ATT PDU size from e.g. SMP w/ LESC
Drawbacks:
- higher memory usage
- kconfig change
The higher memory use is only temporary, as this will be followed-up
with more refactors that should bring it back down.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add the GMAP shell module with support for running the
various audio configurations in an easy way.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CAP Initiator and the CAP Commendar share quite a lot of
functionality in terms of discovery and performing set-based
procedures.
The code for handling most of this has been moved to
cap_common.c to avoid duplicating code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cfg to use flat arrays to store
metadata and codec specific configurations.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added Kconfig options to make the various PACS characteristics that are
optionally notifiable selectable as notifiable. Selecting a
characteristic as notifiable will make it so for all pacs instance on
the device.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
The number of subgroups the scan delegator supports should
match the number of subgroups the broadcast sink supports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Rename the bt_codec struct to bt_audio_codec_conf or
to the new struct bt_audio_codec_cap.
Rename the bt_codec_data to bt_audio_codec_data.
The purpose of this is to split the codec specific configuration
and codec capabilities into seperate structs, as they do not
reflect the same values, or used for the same purpose.
This commit depends on the preset macros workings on either
type of struct (for now), but will be modified in future updates.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some values have been reduced and some have been increased to
better follow the audio configurations in BAP and support
more incoming data.
Also removes HRS as that is not used by LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from tests. It has
been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Added Kconfig options to make HAS characteristics that has notify as
optional property selectable and thus optional. These settings are
global, meaning that a chosen notify property will be used for all
registered has instances.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add support for long writes for the unicast client and server.
This reuses the ATT buffer for long reads.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
After removing the high default for MCS, it was discovered that
the TBS client requires a significant amount of buffers to work
properly as well. Added the requirement as a build assert that
depends on which optional TBS client features are enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A recent change in MCS significantly reduced the requirement
of L2CAP_TX_BUF_COUNT and should now work with any value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This change makes VCS Volume Flag characteristic Notify property
optional and selectable through Kconfig.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Rename the bt_audio_unicast_client API to bt_bap_unicast_client
and move the API to bap.h
Also adds the _bap_ infix to the bt_unicast_client functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
