This commit changes log level for already registered callback from
warning to debug as this is cause unnecessary noise and doesn't indicate
actual issue. Caller gets a certain error code for this case which can
be handled properly.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Change allows performing ECDH operations through system workq. This is
done to allow reducing memory consumption by disabling the long workq on
small SoCs.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Recently I have had to debug issues with PSA and having
the returns values from PSA is very useful in order to
find the root cause of the issue.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Jump straight to the exit portion of the function in the case that
psa_destroy_key() failed and we set err to a non-zero value. This also
fixes Coverity CID 487701 "Code maintainability issues (UNUSED_VALUE)".
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The code shouldn't be checking for HCI command support anymore, rather in
the case of debug keys we can just start immediately using them.
Fixes commit 09e86f3b69.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add a separate test for public key validity. This needs to be done
synchronously so that we can respond with an early failure message to the
peer device.
Fixes#80218
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
When developing Bluetooth applications, you typically run into
some errors. If you are an experienced Bluetooth developer,
you would typically have an HCI error lookup table in your memory.
Others might not.
This commit utilizes defines CONFIG_BT_DEBUG_HCI_ERR_TO_STR
and utilizes bt_hci_err_to_str() to print out HCI error strings
when enabled to improve the user experience.
Several alternatives where considered. This approach was chosen
as it had the best balance between readability, code size, and
implementation complexity.
The alternatives are listed below as a reference.
1. Macro defined format specifier:
```c
#define HCI_ERR_FMT "%s"
#define BT_HCI_ERR_TO_STR(err) (err)
#define HCI_ERR_FMT "%d"
#define BT_HCI_ERR_TO_STR(err) bt_hci_err_to_str((err))
LOG_INF("The event contained " HCI_ERR_FMT " as status",
BT_HCI_ERR_TO_STR(err));
```
Advantage: Space efficient: Code size does not increase
Disadvantage: Code becomes hard to read
2. Format specifier to always include both integer and string:
```c
static inline const char bt_hci_err_to_str(err)
{
return "";
}
LOG_INF("The event contained %s(0x%02x) as status",
bt_hci_err_to_str(err), err);
```
Advantage: Simple to use, implement, and read,
Disadvantage: Increases code size when CONFIG_BT_DEBUG_HCI_ERR_TO_STR
is disabled. The compiler seems unable to optimize away the unused
format specifier. Note: The size increase is only present when
logging is enabled.
3. Always print as string, allocate a stack variable when printing:
```c
const char *bt_hci_err_to_str(char *dst, size_t dst_size, uint8_t err)
{
snprintf(dst, dst_size, 0x%02x, err);
return dst;
}
LOG_INF("The event contained %s as status", BT_HCI_ERR_TO_STR(err));
```
Advantage: Very easy to read.
Disadvantage: Printing error codes becomes slow as it involves calling
snprint.
4. Implement a custom printf specifier, for example E.
This requires a global CONFIG_ERR_AS_STR as I assume we cannot have
one specifier for each type of error code.
Also, I assume we cannot start adding specifiers for each subsystem.
```c
#define BT_HCI_ERR_TO_STR(err) (err)
#define BT_HCI_ERR_TO_STR(err) bt_hci_err_to_str((err))
LOG_INF("The event contained %E as status", BT_HCI_ERR_TO_STR(err));
```
Advantage: Both efficient code and readable code.
Disadvantage: This requires a global CONFIG_ERR_AS_STR as I assume
we cannot have one specifier for each type of error code.
Also, I assume we cannot start adding specifiers for each subsystem.
That is, this approach is hard to implement correctly in a scalable
way.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Unit test project for bt_pub_key_gen().
This is part of subsys/bluetooth/host/ecc.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add bt_pub_key_hci_disrupted function for when hci is disrupted during
a pub key hci command, to clear callbacks and BT_DEV_PUB_KEY_BUSY flag.
Call this from bt_disable for the case bt_disable disrupts the pub key
hci command.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds defines for ECC public keys, private keys, DH keys and key
coordinates. Replaces raw numbers throughout.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Commit d6c34c4644 changed the behavior
slightly but didn't update the documentation. The callback will now be
reset to NULL once the key is generated. Calling bt_pub_key_gen()
multiple times before the key is finished would result in creation of an
infinite loop. This could happen when an application calls mesh_init()
and mesh_reset() in quick succession. Clarify the behavior of the API in
the documentation.
Also passing a NULL argument would result in an undefined behavior, so
add a check to match the behavior described in documentation.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
