sizeof(struct bt_le_cs_write_cached_remote_fae_table) = 74,
so the default value (65) was already too small in some cases.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Remove a kconfig dependency on BOARD_NATIVE_POSIX which
does not really exist anymore.
Replace a comment mention of native_posix with native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix HCI command buffer allocation failure, that can cause
loss of Host Number of Completed Packets command.
Fail by rejecting the HCI Host Buffer Size command if the
required number of HCI command buffers are not allocated in
the Controller implementation.
When Controller to Host data flow control is supported in
the Controller only build, ensure that BT_BUF_CMD_TX_COUNT
is greater than or equal to (BT_BUF_RX_COUNT + Ncmd),
where Ncmd is supported maximum Num_HCI_Command_Packets in
the Controller implementation.
Relates to commit 81614307e9 ("Bluetooth: Add workaround
for no command buffer available")'.
Relates to commit 297f4f481f ("Bluetooth: Split HCI
command & event buffers to two pools").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Relocated `bt_shell_private.c` to the `common` folder to enable
independent use between `BT_SHELL` and `BT_MESH_SHELL`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Since the TinyCrypt library is being deprecated in Zephyr, this
commit modified the dependencies of BT_RPA. Instead of selecting
TinyCrypt, it relies on BT_HOST_CRYPTO or BT_CTLR_CRYPTO. This
helps both in the deprecation process of TinyCrypt, but also this
is more correct dependency since these 2 symbols are extensively
used in the rpa.c source code.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Because the number of ACL RX buffers must be at least the number of
maximum connections plus one, increasing `CONFIG_BT_MAX_CONN` could
inadvertently lead to a build failure if the number of ACL RX buffers is
not also increased. This dependency may not be obvious to users.
To address this issue, this commit deprecates the
`CONFIG_BT_BUF_RX_COUNT` Kconfig symbol and computes the value in
`buf.h` using the new `BT_BUF_RX_COUNT` define. Note that the default
value and the minimum range value have been changed to 0 to "disable"
the option.
Additionally, to allow users to increase the number of ACL RX buffers,
this commit introduces the new `CONFIG_BT_BUF_RX_COUNT_EXTRA` Kconfig
symbol. The value of this symbol will be added to the computed value of
`BT_BUF_RX_COUNT`.
The configurations of tests and samples have been updated to reflect
these changes.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Channel sounding frequently produces very large events, so the default
of 68 bytes can lead to buffer overruns / memory corruption.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
It was pointed out in a future PR that they should have
a corresponding experimental Kconfig entry.
See PR #73795.
This updates the APIs added in PR #73826 and PR #74295.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the subsys/bluetooth/(common, crypto, service, shell).
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
`CONFIG_BT_DEBUG_LOG` has been deprecated for more than 2
releases, replace it with `CONFIG_BT` + `CONFIG_LOG`:
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The maximum data length of event packet is 255 for BR/EDR.
Such as the data length of event Remote Name Request
Complete is 255.
Set BT_BUF_EVT_RX_SIZE to 255 to avoid error "Not enough
space in buffer" from bt_hci driver.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Enabling vendor-specific extensions also implies support for vendor
events, so a separate Kconfig option for that is unnecessary.
One small additional thing this requires is the use of the
__maybe_unused annotation, since there's no-longer a single Kconfig
option that the controller hci.c can use to know that the vendor event
helper symbols are needed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Some part of the descriptions were wrong. Also, the description of
`BT_BUF_ACL_RX_SIZE` was too verbose and no longer needed with the
updated L2CAP documentation.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This config selects a variant of the HCI driver interface that spills
out host internals unto the drivers and even the Zephyr controller. It
will now be removed in favor of driver interfaces that hide the
internals of the host.
The new default is `CONFIG_BT_RECV_WORKQ_BT`.
Any references to the removed kconfig are refactored out.
Any out-of-tree driver using the removed interface can be easily adapted
by copying the following implementations into the driver as private
functions:
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV_PRIO`
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV`
- `hci_driver.h:bt_hci_evt_get_flags`
- `hci_raw.c:bt_recv_prio`
In combination these symbols function as a interface adapter. These
symbols will be removed in this PR in subsequent commits.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
SIG has changed Bluetooth mesh to Bluetooth Mesh
Updating zephyr docs accordingly
Leaving out old release notes
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
Since sending of public key was moved into system
work (https://github.com/zephyrproject-rtos/zephyr/pull/62331)
it uses the same context as a Host Tx buffer
allocator for gatt sending. Host cannot wait for
free buffer anymore. Mesh requires 4 buffers
to send max size frame(public key) during
provisioning.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This module calls `log_output_*` functions so it should enable
the `LOG_OUTPUT` Kconfig option explicitly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Setting default value for BT_BUF_ACL_TX/RX_SIZE and
BT_CTLR_DATA_LENGTH_MAX to 37, as this will process the
incoming data the most efficient way.
When GATT is enable BT_BUF_ACL_RX_SIZE does not have to be 73,
as this will just give segmented messages for the public keys
exchange during provisioning.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When ISO Central is enabled it is allowed to configure many CISes at
once. For this a large command buffer is needed. This is also tested
by HCI/CIS/BI-05-C.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Remove Kconfig symbol `BT_DEBUG`. It was not useful anymore with the
previous logging updates.
Replace it, where it was used, by the file local debug symbol.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Deprecate Kconfig symbol `BT_DEBUG_LOG`. With the new `BT_LOG` having
the same effect, `BT_DEBUG_LOG` is not useful anymore and shouldn't be
used.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Move all Kconfig symbols related to Bluetooth logging into the newly
created `Kconfig.logging`. The logging symbols are now grouped by into a
menu "Bluetooth logging". Closely related symbols are grouped with each
others. For example, audio related logging symbol are found behind a
submenu "Audio" inside the "Bluetooth logging".
The deprecated logging symbols have also been moved in a submenu of
"Bluetooth logging", it's easier to avoid them so.
Behavior of the Bluetooth logging system:
When `LOG` symbol is selected, if Bluetooth is enabled (`BT` symbol
selected), the Bluetooth logging is enabled.
If the user does not set any log level, the Bluetooth logging symbols
will inherit the log level of `BT_LOG_LEVEL`. If the user does not set
the level of `BT_LOG_LEVEL`, the default log level will be the one
defined by the logging subsystem. Which currently is `LOG_LEVEL_INF`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
To avoid legacy extended adv repots blocking important
events or work, mark them as discaradble.
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
Show function names for all BT_xx logging levels when BT_DEBUG_LOG is
enabled. This makes it easier to find the problematic lines.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The commit is a minor refactor of the common Host and Controller
Kconfig. There were used "default n" that should be avoided.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add vendor specific IQ samples report that holds IQ data in 16 bits
signed integer format. Thanks to that we preserve complete accuracy of
IQ samples provided by Nordic Direction Finding Extension in Radio
peripheral. That helps to maintain better accuracy of evaluated
angles with use of reported IQ samples.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Boolean options are not allowed to start with "Enable...".
BT_HCI_VS_FATAL_ERROR started with "Enable..." making some PRs fail due
to compliance checks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Provide common helper functions to create extended extended Zephyr
Fatal Error functionality in HCI common code.
Use the implementation in hci_rpmsg sample.
The sample didn't provide an information about Controllers assert
or system fatal error to an application code while run with nRF5340
SoC. The goal for hci_rpmsg sample change is to enhance user experience
for conformance testing of the Bluetooth Controller while executed with
nRF5340.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This fixes Bluetooth logs that were not sent over RTT.
Minor cleanup has been made to limit the number of ifdefs.
> ACL Data RX: Handle 0 flags 0x02 dlen 11 #1049 83.117000
ATT: Handle Value Indication (0x1d) len 6
Handle: 0x0003
Data: 0100ffff
= bt: bt_att: Unhandled ATT code 0x1d 83.117100
> HCI Event: Disconnect Complete (0x05) plen 4 #1050 84.247700
Status: Success (0x00)
Handle: 0
Reason: Remote User Terminated Connection (0x13)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Change CONFIG_BT_RECV_IS_RX_THREAD into a
choice:CONFIG_BT_RECV_CONTEXT with the following options
(names can be discussed further of course):
CONFIG_BT_RECV_BLOCKING
CONFIG_BT_RECV_WORKQ_BT
CONFIG_BT_RECV_WORKQ_SYS
This way users would be able to choose what to run most of
the BLE stack on, they wouldn't be forced to a single model.
We would default to CONFIG_BT_RECV_BLOCKING so that we wouldn't
need to change the system workqueue stack size by default, instead
asking users to do so if they select the CONFIG_BT_RECV_WORKQ_SYS option
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Users will usually not want to browse through these. Therefore it is
better to hide them a bit.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
After https://github.com/zephyrproject-rtos/zephyr/pull/41337, extended
advertising reports are no longer discardable. Ensure the
non-discardable events are large enough.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
BT_BUF_EVT_RX_SIZE size by default was set to 68 bytes.
In case of build with direction finding connected mode receiver
enabled the size of event buffer was not enough to store all
IQ samples. In such situation IQ samples reports were not delivered
to Host.
The commit changes default size of event RX buffer to 255 in
case the BT_DF_CONNECTION_CTE_RX is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Increases the size-limit of ACL packets, to accomodate for using Zephyr
as a host for controllers which support ACL packets larger than 251
bytes.
Signed-off-by: Frode van der Meeren <frode.vandermeeren@nordicsemi.no>
Periodic advertising reports can have 255 bytes of payload so need to
use that value by default if periodic advertising is enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Remove Kconfig options
CONFIG_BT_UART_ON_DEV_NAME and CONFIG_BT_MONITOR_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)) and
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_mon_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
LE Set Connection CTE Receive Parameters HCI command size may not fit
into HCI TX command buffer size, which default value is 65 bytes.
For platforms other than Nordic there may be up to 75 antenna IDs
put into the command.
Added new default value for SOCs not compatible with Nordic to
extend default TX buf size to 83 bytes (75 bytes for antena IDs,
5 bytes for other command parameters, 3 bytes for command header).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
