Fix usage of the wrong variable in insert_be16 which could cause
insertion at the wrong offset.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
SYS_PORT_TRACING_OBJ_FUNC_* are for when the function being
traced is a method of an object. Use SYS_PORT_TRACING_FUNC_* instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This adds an architecture-specific post processing after memory
writes. This introduction is due to GDB's behavior regarding
breakpoints in code. GDB may choose to write break instructions
instead of using hardware breakpoints to interrupt code
execution (e.g. for manual breakpoint or stepping through code).
There is no separate GDB packet type for this. So we need to
make an assumption that a memory write may be to setup break
instructions. Different architectures may have their own unique
ways of dealing with instruction cache in this situation. So we
defer to the architecture code to handle this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add argument to the TLS credential `cred buf` command that enables
a shell bypass to write the TLS credential directly to the credential
buffer.
This is useful for writing load credentials that cannot fit in a single
`cred buf` command and would otherwise have to be split into multiple
cred buf commands.
Sending multiple in succession like that from a script for example very
easily causes the shell RX buffer to get full, resulting in multiple
`RX ring buffer full.` warnings.
This is very difficult for a script to handle.
Using a bypass has much better performance and can easily avoid the
RX ring buffer full condition without increasing the RX ring buffer
to much.
It is also easier for a script to use.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
With experience it becomes clear, that failing to resolve symbols
during the linking process is likely fatal for the module loading and
a simple warning isn't enough. Fail loading instead.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The "net conn" command printed AF_PACKET socket as AF_UNK(3).
Fix this by printing "AF_PACKET" in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we cleanup only those DNS servers that belong to
certain network interface when the interface goes down.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Bind the network interface to the network interface we
have received the DNS servers from. This is now the default.
The previous behavior can be restored by disabling the
CONFIG_NET_DHCPV6_DNS_SERVER_VIA_INTERFACE option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Bind the network interface to the network interface we
have received the DNS servers from. This is now the default.
The previous behavior can be restored by disabling the
CONFIG_NET_DHCPV4_DNS_SERVER_VIA_INTERFACE option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to specify which network interfaces to bind the
server to when reconfiguring the DNS system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add option in enum phy_link_speed to disable auto-negotiation.
This allows PHY drivers to support disabling auto-negotiation.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
SUBALIGN forces alignment to the specified value, even if the object
requires stricter alignment. This causes mis-aligned access when accessing
the resulting value.
Signed-off-by: Keith Packard <keithp@keithp.com>
This commit adds names to Kconfig choice sysmbols. This allows for their
selection from Kconfig, e.g.:
choice TRACING_FORMAT_CHOICE
default TRACING_TEST if CONFIG_FOO
default TRACING_CTF if CONFIG_BAR
endchoice
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The 50 ms TX mutex timeouts introduced in commit b0a0feb cause
dropped messages when used with the shell log backend. This
commit makes time timeout configurable using the
CONFIG_SHELL_TX_TIMEOUT_MS Kconfig option and makes the
default timeout longer when shell log backend is enabled.
Link: #90215
Signed-off-by: Tommi Kangas <tommi.kangas@nordicsemi.no>
The bt_le_ext_adv_info struct has been extended to also
contain the advertising and periodic advertising states.
Additionally, the function verifies the input to avoid
NULL pointer access, and the addr field is more
properly documented.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
See Discussion https://github.com/zephyrproject-rtos/zephyr/discussions/83659
for information about the purpose of this change.
Modifies run actions of hierarchical state machines
to return a value indicating if the event was handled
by the run action or should be propagated up to the
parent run action. Flat state machines are not affected,
and their run action returns void.
smf_set_handled() has been removed and replaced by
this return value. smf_set_state() will not propagate
events regardless of the return value as the transition
is considered to have occurred.
Documentation, tests, samples, has been updated.
USB-C and hawkBit use SMF and have been updated to use
the new return codes.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Apply clang-format to USB-C in preparation for code changes
No code is changed, only formatting.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Adds a new abstract struct for unicast group that is
specific for CAP. The difference between this and the BAP
unicast group, is that the parameters are CAP streams and
thus ensuring that the streams in the group adhere to the
additional requirements that CAP has on top of BAP.
This also adds foreach functions for both CAP and BAP
to allow users to iterate on the streams in the
abstract groups.
Various samples, modules and tests have been updated
to use the CAP struct and API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Drop this redundant check that was likely meant to be checking that Z
field is zero but in the case of reception the RFC says it MUST be
ignored anyway.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
HID lookup table can live in Flash and save some RAM (quite a bit
actually, as it's quite large!).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Core Specification 6.1 clarified exptected erro code in case peer
sending invalid Public Key. In case pairing is aborted during or
immediately after Public Key Exchange phase has completed (which is
the case here) expected reason code is set to "DHKey Check Failed".
This was affecting SM/CEN/KDU/BI-04-C and SM/PER/KDU/BI-04-C
qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
add timestamping on Tx to packets marked for timestamping
add timestamping on Rx to all packets for later use
fix race condidition on adding timestamp when sending delay_req
Signed-off-by: Adib Taraben <theadib@gmail.com>
Fix up the bus fault by not violating the MAXPACKETSIZE
value range of NRF_CCM h/w peripheral.
Fix up relates to commit 920117922b ("Bluetooth:
Controller: nRF53x: Fix NRF_CCM MAXPACKETSIZE value").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect elapsed events value when LLL event prepare_cb
was invoked but was aborted before anchor point sync. This
caused premature supervision timeouts under applications
configured with CONFIG_BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX=n
and CONFIG_BT_CTLR_PERIPHERAL_RESERVE_MAX=n.
Fixes commit 247037bd3e ("Bluetooth: Controller: Fix
incorrect elapsed events value").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ticker_is_initialized() should only return true when the ticker is
running (triggered regularly). Users like nrf_flash_sync_is_required()
depend on this behavior.
When the bluetooth controller driver is closed, ll_deinit() calls
lll_deinit(), which stops the ticker from being triggered. Also
deinitialize the ticker to ensure that ticker_is_initialized() returns
false.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
According to RFC 793, the seqnum test includes 4 cases when STATE >
TCP_SYN_SENT:
Seg-len Recv-win Test
------- -------- ---------------------------------------
0 0 SEG.SEQ = RCV.NXT
0 >0 RCV.NXT =< SEG.SEQ < RCV.NXT+RCV.WND
>0 0 not acceptable
>0 >0 RCV.NXT =< SEG.SEQ < RCV.NXT+RCV.WND
or RCV.NXT =< SEG.SEQ+SEG.LEN-1 <RCV.NXT+RCV.WND
After the seq validation, the 'send duplicated ACK' code in FIN_WAIT1/
2/CLOSING/TIMEWAIT state processing is duplicated, so remove them.
Added TEST_CLIENT_SEQ_VALIDATION ztest case in tests/net/tcp.
Signed-off-by: Shrek Wang <inet_eman@outlook.com>
With the commit fe3c001eeb ("usb: device_next: disable high-speed USB
device descriptor if not used") there is no high-speed device descriptor
by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The target variable is a `uint8_t`. It is not reasonable to pass a
value with `uint16_t` in little-endian format.
Remove `sys_cpu_to_le16`, and pass the value directly.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
When using Zero Latency IRQs do not invoke ISR_DIRECT_PM and
do not return to reschedule in the kernel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow network shell DNS module to verify that the DNS SD
record is a valid one. Currently this is not exposed to
applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In high throughput tests it's fairly easy to overflow the current 32-bit
byte counters in net statistics (it's just over 4 GB of data).
Therefore, make the byte counters 64-bit to prevent overflows.
Rearrange some fields to avoid padding.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_stats_t type is an unsigned type, therefore %u should be used
instead of %d when printing values of this type, otherwise negative
values will be printer if INT32_MAX is exceeded.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
For 'wifi connect' or 'wifi ap enable' CMD, there is 'invalid option'
error log when input '-i' parameter. Parsing '-i' can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Updates the LE legacy pairing procedure as a result of errata ES-24491.
New part:
If the initiating device receives an LP_CONFIRM_R value that is equal to
the LP_CONFIRM_I value, the pairing process shall be aborted and fail
with "Confirm Value Failed" as reason.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
