The disparity in C objects built causes
the test to fail.
This removes those lines from the log
to inline log comparison.
Let's disable it in the relevant test.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Fix missing match on Ztest test case summary log entries, so even
if the test case 'END' log entry is missed or corrupted, its status
will be updated from the Ztest summary log entries, if present.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Kconfig settings of string type is passed to CMake with quotes to ensure
they are properly handled, for example when specified in testcase.yml as
> extra_args:
> - CONFIG_FOO="bar"
Support sysbuild Kconfig settings `SB_CONFIG` by performing the same
quoting for settings starting with `SB_CONFIG_`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adds board hooks to the disallowed defconfig symbol list as
these should be selected, not put in a defconfig
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
With this commit we add a runner that is capable of flashing
the sensry sy1xx socs via uart to support the onboard OTP
bootloader. Added the sy1xx runner to the list for
automated test.
Signed-off-by: Sven Ginka <s.ginka@sensry.de>
Add a 'title' keyword to the binding to provide a short
description of the binding, while 'description' serves as
the long description.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Change OpenOCD version regex to be compatible again with format strings
not having a space or newline immediately after the version nr.
Modified regex has been verified with the strings listed below.
Ubuntu:
"Open On-Chip Debugger 0.11.0"
ADI:
"Open On-Chip Debugger (Analog Devices 0.12.0-1.1.1) OpenOCD 0.12.0 (2024-
08-27-17:25)"
Zephyr SDK:
"Open On-Chip Debugger 0.11.0+dev-00728-gb6f95a16c (2024-02-17-23:51)"
Infineon:
"Open On-Chip Debugger 0.12.0+dev-5.2.1.3248 (2024-08-08-17:29)"
Espressif:
"Open On-Chip Debugger v0.12.0-esp32-20240318 (2024-03-18-18:25)"
Fixes: 1c05f2121c
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Add a basic RFP runner that supports the `flash` command targettting
the Renesas Standard Boot Firmware.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
The Nordic nRF54L series ICs use RRAM instead of flash. This implies
that erasing the internal storage before writing the new firmware is not
required anymore (unlike NOR flash, which does).
Note that RRAM on nRF54L devices is not physically paged, and paging is
only artificially provided, with a page size of 4096 bytes, for an easier
transition of nRF52 software to nRF54L devices.
In order to speed up the flashing operation and avoiding doing wasteful
write operations on the RRAM, default to ERASE_NONE for ICs in these
series.
A new ``--erase-pages`` command-line switch has been added to allow
users to keep erasing the pages that will be written to the firmware.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This test fails on older python versions (3.10) and only on CI.
Disabling it while we investigate. The test itself verifies inline logs
options, so the functionality test is not impacted.
Tracked in #87769
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Pin python dependencies to hashes and cleanup/unify python setup steps in
various workflows.
We now have one dependency file containing all requirements for github
actions that is managed centrally with hashes. No direct pip installs
are needed in workflow files and everything shall go via the
requirements file.
Pinning to specific version and hashes helps with preventing supply
chain attacks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As part of relocation, this script matches each source file to its
corresponding object file. This matching is done inside of get_obj_filename
which is called once per source file.
get_obj_filename traverses the entire build directory on every invocation.
This is unnecessary since built object files don't change. On a
sufficiently large project (like mine), this script takes over a minute and
the majority of that time is spent needlessly traversing the build
directory again and again.
Caching the list of object files enables this script to run in less than a
second.
I tested by building my project (which enables the relocation script) and
comparing memory breakdown before / after.
Signed-off-by: Galen Krulce <gkrulce@meta.com>
Remove the redundant keys method when using the
in statement on a dict to fix the Ruff SIM118
warning.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Tweak gen_app_partitions.py to be able to generate cmake linker
generator output as well as ld-script fragments.
Signed-off-by: Björn Bergman <bjorn.bergman@iar.com>
Add an empty codeowner file redirecting to MAINTAINERSS.yml file for
clarity and to make some tooling happy.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
need add protection when check with sysbuild filter out
application, the domains is NULL
fixes: #87163
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Quarantine filter was not correctly identifying the simulator name.
Now it uses the simulator name from the Platform object,
ensuring that quarantined tests are properly excluded or verified
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The section lists that govern whether the ELF
section is recognised or not are out of date.
A programming bug has rendered the unrecognised
section check unrunnable for years.
Thus, the practically dead code of the
unrecognised section check is removed
in this commit.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Make sure we install packages with no issues, some of the issues being
reporting on packages we might install using pip:
Warn: Project is vulnerable to: PYSEC-2019-41 / GHSA-qfc5-mcwq-26q8
Warn: Project is vulnerable to: PYSEC-2014-14 / GHSA-652x-xj99-gmcc
Warn: Project is vulnerable to: GHSA-9wx4-h78v-vm56
Warn: Project is vulnerable to: PYSEC-2014-13 / GHSA-cfj3-7x9c-4p3h
Warn: Project is vulnerable to: PYSEC-2018-28 / GHSA-x84v-xcm2-53pg
Warn: Project is vulnerable to: PYSEC-2017-74
Warn: Project is vulnerable to: GHSA-55x5-fj6c-h6m8
Warn: Project is vulnerable to: PYSEC-2014-9 / GHSA-57qw-cc2g-pv5p
Warn: Project is vulnerable to: PYSEC-2021-19 / GHSA-jq4v-f5q6-mjqq
Warn: Project is vulnerable to: GHSA-pgww-xf46-h92r
Warn: Project is vulnerable to: PYSEC-2022-230 / GHSA-wrxv-2j5q-m38w
Warn: Project is vulnerable to: PYSEC-2018-12 / GHSA-xp26-p53h-6h2p
Warn: Project is vulnerable to: PYSEC-2024-4 / GHSA-2mqj-m65w-jghx
Warn: Project is vulnerable to: PYSEC-2023-165 / GHSA-cwvm-v4w8-q58c
Warn: Project is vulnerable to: PYSEC-2022-42992 / GHSA-hcpj-qp55-gfph
Warn: Project is vulnerable to: PYSEC-2023-137 / GHSA-pr76-5cm5-w9cj
Warn: Project is vulnerable to: PYSEC-2023-161 / GHSA-wfm5-v35h-vwf4
Warn: Project is vulnerable to: GHSA-3f63-hfp8-52jq
Warn: Project is vulnerable to: GHSA-44wm-f244-xhp3
Warn: Project is vulnerable to: GHSA-56pw-mpj4-fxww
Warn: Project is vulnerable to: GHSA-j7hp-h8jx-5ppr
Warn: Project is vulnerable to: PYSEC-2023-175
Warn: Project is vulnerable to: PYSEC-2018-34 / GHSA-2fc2-6r4j-p65h
Warn: Project is vulnerable to: PYSEC-2021-856 / GHSA-5545-2q6w-2gh6
Warn: Project is vulnerable to: PYSEC-2019-108 / GHSA-9fq2-x9r6-wfmf
Warn: Project is vulnerable to: PYSEC-2018-33 / GHSA-cw6w-4rcx-xphc
Warn: Project is vulnerable to: PYSEC-2021-857 / GHSA-f7c7-j99h-c22f
Warn: Project is vulnerable to: GHSA-fpfv-jqm9-f5jm
Warn: Project is vulnerable to: PYSEC-2017-1 / GHSA-frgw-fgh6-9g52
Warn: Project is vulnerable to: GHSA-c6fm-rgw4-8q73
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed logger.setLevel(...) from all twister modules, becasue
there should be only one place where twister loggers are configured,
and the log level should be set in that place.
This should be done in twister_main.py in setup_logging function.
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
Add option to force integration mode on a defined list of tests, for
example tests for sample that are identified with 'sample.'.
A sample per definition shall be tested on documented and supported
platforms listed in the sample documentation. Samples shall not be used
as tests to verify functionality of a feature on all available plaforms
in Zephyr.
To still allow testing on platforms not listed in the doc, and when such
platforms are covered by the provided filter, we should still be able to
build/run the tests on those platforms (not directly listed in
integration_platforms).
We detect a sample by its test identifier, i.e., it starts with 'sample.'.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of hardcoding a set of paths and trying to find the JLink
executable in them, use the corresponding Windows registry to locate it:
`HKEY_CURRENT_USER\\Software\\SEGGER\\J-Link`
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The logic to detect the default JLink location was placed at the top of
the script, executing whenever the script was imported. The west
extension command framework loads all runners when initializing, and so
this logic was being executed even when using another runner.
Move the logic to a function that is only executed when the JLink runner
is selected, to avoid executing it at all times.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ADI fork of OpenOCD prints a modified version line; adjusting the
regex to account for that different format when checking the OpenOCD
version.
Signed-off-by: Pete Johanson <pete.johanson@analog.com>
The following board revision properties can now be used as part
of the format string in the 'west boards -f ...' command.
- board.revisions with format {revisions}
- board.revision_default with format {revision_default}
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
Use the --format flag in git rather than parsing the output of
the git log. The inspiration for this change was that the previous
implementation breaks if there's a ~/.gitconfig that changes the
git log format.
Signed-off-by: John Barbero Unenge <git@lsrkttn.com>
If BB tests failed, crashed, etc., log handles
could linger and crash test cleanup.
Adding log closing to a `finally` section
should prevent those issues.
Loggers should not be set up as globals,
as it makes testing much harder.
Running multiple Twisters may cause for the
logfiles to be still "in use".
When exiting main, close all logfiles
and remove their handlers from all loggers.
Do that for conftest as well.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Add a `--dry-run` (or `-d`) option to the posix kconfig
migration script for deprecated POSIX Kconfigs.
Additionally, add a set of skipped options (e.g. `TIMER`).
The `CONFIG_TIMER` option does not exist in the tree anymore
and was way too generically named previously, so the false
positive rate is astronomical, so it makes sense to skip it.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
MD5 and SHA1 are not supposed to be used nowadays on security context.
Some ancillary scripts in tree do use them, but for verification only -
or where externally mandated, such the SPDX tool.
This patch marks those usages as `usedforsecurity=False`, which helps
clarify intent.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Calling `west build --build-opt="-v" --build-opt="-j=<n>"`
passes the build options to `cmake --build ... -- <build-opt>` which
again is passed to the native build tool, such as ninja or make.
However, when ExternalProjects are used in CMake, such as in TF-M or
sysbuild builds then those extra build options are only passed to the
first image build and not those build as external projects.
CMake supports environment variables for those flags, so translate
verbosity and number of jobs to those environment variables and thereby
support those flags for all images when specified by the user.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Align with native_simulator's upstream main
3ccb09ec00e291f699219c0e3f5b14b6b1c7ceb6
Which includes:
3ccb09e nsi_errno: Add new API to get the current host side errno
32eab87 Makefile: Ser a macro to distinguish build in runner context
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename the driver files, binding and kconfig options, while deprecating
the old binding and kconfig options.
Uses in tree are replaced.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In order to enable the use case where the underlying flash tool supports
bulk-flashing using multiple device IDs, augment the core runner class
with this new runner capability and implement it in the nrfutil runner,
since the nrfutil tool supports it natively.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is an extension for indexing the source code in the workspace
with GNU Global. See the command line help for more information about
Global.
Signed-off-by: Martí Bolívar <marti.bolivar@oss.qualcomm.com>
Align with native_simulator's upstream main
20d3b2b76a3bf61d35becbe17928cdf22e885b9f
Which includes:
* 20d3b2b Makefile: Support building C++ files with runner
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Added recently introduced optimizations - generation in string literal form
and faster generation for hexadecimal initializer list form - to gzip path
as well.
Signed-off-by: Irfan Ahmad <irfan.ahmad@siemens.com>
Incremental refactoring.
Fix PEP8 issues to make ruff green for config_parser.py module.
Add __init__.py to twister directory to make it a proper python package,
and make modules importable.
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
Rework of the flashing algorithm broke the STM32N6 dfu flashing.
Add the case of using usb port and download-modifier (new n6 specific
option) as a new case of using the bin file for flashing.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Adds some Kconfigs to the allow list which are used for
demonstration purposes in sysbuild documentation
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Setup logging per process to fix issue on both mac and windows where
handlers are not available to the processes.
Fixes#86237
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This driver was deprecated and must be removed by Zephyr version
4.1 according to lifecycle/release guidelines.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This change enhances the devicetree library by adding support for tracking
the source filename and line number for nodes and properties.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix --download-address to expect a signed.bin file when --download-address
is provided.
To allow testing this case despite the checks put in the runner, add a
patch functions which return that zephyr.bin is actually present
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Aim is to avoid 2 issues:
- Requesting --download-address to flash hex files
- Flashing hex files (non signed) on N6 which works but doesn't allow
persistent firmware
Hence this changes binds --download-address with usage of .bin files.
If --download-address was not provided, default to hex flashing.
File existence done with isfile() will ensure the required file
is available before flashing and report an error if this is not the
case.
Note: In specific N6 case, we're verifying zephyr.signed.bin is
available instead of zephyr.bin. This is ensure since self.cfg.bin_file
matches runners_yaml_props_target configuration (set to
zephyr.signed.bin on STM32N6).
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
native_sim only works and builds on Linux, when running twister on the
Mac, this platform fails to build and reports errors.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Modify the requirements-compliance.txt to exclude python-magic from
windows system installation. On windows, the line:
""python-magic-bin; sys_platform == "win32""" already exists. Adding:
python-magic on windows creates issues where the check_compliance.py
script will either freeze or throw errors related to libmagic.
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
Introduce a new command-line option `--keep-artifacts` in twister that
allows users to specify which artifacts should be preserved
during test cleanup in addition to the default set.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Co-authored-by: Anas Nashif <anas.nashif@intel.com>
These files can be useful to troubleshoot a test that's failing,
and they're really small, too.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
NOTE: Even though previous commits indicate, that this can only happen on
MacOS, that's actually not true. It happens on Linux as well.
The constructor of `psutil.Process` can throw an exception as well, so we
need to wrap the whole loop in another try, unfortunately.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
While it doesn't cause any issues, it's more consistent and makes future
commits which add handling for more exception types more readable.
Based on: 0df8240b49
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Problem
-------
Board & SoC extensions are used to define out-of-tree board variants or
SoC qualifiers. When a board is extended, it has multiple directories
associated with it (each with its own `board.yml`), where twister should
be able to find additional platform files to support these qualifiers.
Currently, this doesn't work, because twister only traverses the primary
BOARD_DIR and ignores the rest.
The fix would've been trivial in the case of "legacy" platform files,
i.e. those of the form `<normalized_board_target>.yaml`, but it's less
straightforward for the newly introduced `twister.yaml` format.
A `twister.yaml` file contains platform configuration that can be shared
by multiple board targets and tweaked for specific targets by using the
top-level `variants` key. Normally, there is at most one `twister.yaml`
per board, but the file isn't necessarily unique to one board. Instead,
it's unique to one directory, which may define multiple boards (as is
the case with e.g. `boards/qemu/x86/`).
With extensions in the picture, the goal is to initialize platforms when
given multiple `twister.yaml` per board. The OOT files are expected to
only provide information about OOT board targets, without being able to
override in-tree targets (same principle as in the Zephyr build system).
Solution
--------
The `twister.yaml` handling is broken up into multiple passes - first
loading all the files, then splitting the `variants` keys apart from the
shared configuration, before constructing the Platform instances.
The purpose of the split is to treat the variant information as global,
instead of making unnecessary or faulty assumptions about locality.
Remember that the build system can derive board target names not only
from `board.yml`, but from `soc.yml` too. Considering that any board may
end up using an OOT-extended SoC (and hence multiple `soc.yml` files),
not every board target can be said to belong to some board dir.
Unlike the variant data, the remaining top-level config is still rooted
to the primary BOARD_DIR and inherited by the extension dirs from there.
This is quite intuitive in most imagined cases, but there is a caveat:
if a `twister.yaml` resides in an extension dir, then it is allowed to
have a top-level config of its own, but it will be silently ignored.
This is to support corner cases where, much like how a single board dir
can define multiple boards, a single board dir can also extend multiple
boards, or even do both. In those cases, the primary BOARD_DIR rule
should make it unambiguous which config belongs to which board, even if
it may seem counter-intuitive at first.
For concrete examples of what this means, please see the newly added
platform unit tests.
As part of these functional changes, a good chunk of logic is moved out
of `TestPlan.add_configurations()` into a new function in `platform.py`.
This is because recombining the top-level and variant configs requires
direct manipulation of the loaded YAML contents, which would be improper
to do outside of the module responsible for encapsulating this data.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Allow user to add shell commands in testcase/sample yaml file
alongside the harness_config like in the console harness.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Fixes using the wrong path for checking if disallowed Kconfigs
are present, to use the zephyr base instead of the git top level
folder which caused issues for downstream manifests
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit adds a test that checks if disconnecting
and restarting the IPC session works correctly. The
test is also focused on the "unbound" callback.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
Co-authored-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Existing logic is passing elf file as parameter only when fsbl
or bit file parameter is present. This is incorrect, elf file should
be always passed irrespective of other parameters.
Signed-off-by: Mubin Sayyed <mubin.sayyed@amd.com>
One might want to select the symbols to be relocated inside a file or
a library. To do this, one can use the FILTER argument of
zephyr_code_relocate which must contain a regular expression of the
section names to be selected for relocation.
The test_function_in_sram2 test case in
`tests/application_development/code_relocation` has been updated to
verify that only one function `function_in_sram()` is relocated to ram
and that the function `function_not_relocated()` is not being relocated
when using relocation filter.
Signed-off-by: Sylvain Chouleur <sylvain.chouleur@gmail.com>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With code relocation directives passed to the gen_relocate_app.py script
using generated file, then each directive can be place on individual
line in the file and thus free up the `|` character as separator.
Furthermore, a multi-line file with each directive on separate line is
also more user-readable, making debugging easier.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
After adding more detailed information to the reason field in
Twister report, update twister_report_analyzer.py to group
CMake and Build failures.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Updated test_report_summary to match new string with detailed
reason of build failure.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Extended the reason field in Twister report to include
more detailed information for 'Build failure' and
'CMake build failure'
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
To use openocd rtt shell in a non-Windows environment,
you need to turn off ICANON and ECHO.
Refer to pyocd to enable a temporary terminal and configure
it correctly.
Signed-off-by: Findlay Feng <i@fengch.me>
Add 'images' as valid list in build info schema.
This allow sysbuild and regular Zephyr images to populate build_info.yml
with images included in the build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Introduce a new harness based on pytest that does basic shell command
handling. The harness is enabeld using:
harness: shell
and expects a file with parameters in the form:
test_shell_harness:
- command: "kernel version"
expected: "Zephyr version .*"
- ...
Multiple commands and their expected output can be tested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, file2hex.py supports conversion of binary data into hexadecimal
character list format only. The generated list can then be used to embed
the binary data by using the list to initialize an array. However, this
approach is highly inefficient for large binary files.
A close but considerably more efficient alternative is to use string
literals composed of hex characters (in escaped form) to initialize the
array, instead of an initializer list. Benchmarking (with GCC and clang)
indicates that compile time and host memory usage by the compiler can be
more than an order of magnitude less with string literal approach compared
to the initializer list form.
The only caveat is that string literals contain the null character as
terminator so where accurate length is required, the correct length must
be specified explicitly while defining the array.
Signed-off-by: Irfan Ahmad <irfan.ahmad@siemens.com>
When using --coverage-per-instance, collect the test names in lcov, and
add --show-details to the html report to display those test names.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Instead of capturing the coverage data twice with
--coverage-per-instance, just merge the lcov files in the aggregation
report.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Added script to parse and analyse Twister reports.
Failed tests are grouped together by reason of failure,
Cmake and build errors are grouped using predefined patterns.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Currently, the llext-edk.cmake script requires a number of variables to
be passed in from the main CMakeLists.txt file as arguments to be able
to customize the generated files.
To improve this rigid approach, the script is modified to read in the
following files in the build directory:
* 'zephyr/.config', for the final set of Kconfig options used;
* 'build_info.yml', for the cmake-related variables.
This is more flexible and also easier to maintain, as it doesn't require
manual changes to the main CMakelists.txt file when new variables need
to be referenced.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add a function generate_uuid_registry that calls the gen-uuid-reg.py script
to generate the uuid-registry.h file. If signing an image without sof,
trigger the generation of the uuid-registry.h file.
Instruct the toml file preprocessor to also use the definitions from the
uuid-registry.h file. This will allow the values placed in the
uuid-registry to be used in toml files.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
The nRF54H and the nRF92 series do not support the RESET_SYSTEM reset
kind. Instead one must use RESET_HARD, which this patch now implements.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
After commit aaefaad, flashing of the FLPR and PPR cores in the nRF54H20
was broken due to those cores missing from the _get_core() function that
retrieves the core to program, triggering an exception. Fix it by
referencing those cores and mapping them to the application core.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This acts in a similar way to nrfjprog's --qspiini parameter introduced
in 7eb364b, but works slightly differently in nrfutil: it requires a
config file in JSON format instead of .ini, and it is passed along to
the `execute-batch` command instead of providing it together with the
`program` command.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Both backends supported as runners for nRF ICs, nrfjprog and nrfutil,
support erasing external memory as part of the programming operation.
Before this patch, and when the firmware was detected to be partially or
fully placed in external flash by inspecting the .hex address range, the
runner would instruct the backend tool to fully erase the external
flash (but the nrfjprog runner would ignore that, always erasing only
the sectors required). Instead, correctly default to erasing only the
sectors that are required to program the new firmware image in both tools,
and erase it completely only when the --erase flag is provided by the user.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds a check for Kconfig settings that are disallowed from being
used in defconfig files (because it is the complete wrong place
for them), with the default entry being PINCTRL
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Co-authored-by: Benjamin Cabé <benjamin@zephyrproject.org>
The Nordic nRF52 series have a peculiarity that is not shared with any
other Nordic families of SoCs: the reset pin can be reconfigured as a
regular GPIO. This has an unintended consequence: if the user has
reconfigured the pin in Devicetree to be a GPIO, `west flash` will
override that and configure the IC to use it as a reset pin, and the
firmware at boot won't be able to switch it back to GPIO, because that
requires a UICR erase. This behavior is very confusing to users, because
the GPIO does not work at all, since it is now just a reset line.
With this patch, `west flash` defaults to using soft reset instead of
pin reset for the nRF52 family of devices, to avoid overwriting the
reset pin configuration that the user includes in the image.
In order to be able to continue to use pin reset for users that so
desire it, a new option `--pinreset` is added that forces the use of pin
reset. The existing `--softreset` option is left exactly as it was, but
it is now applicable only to families other than the nRF52.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Commit dc7d8bb introduced the requirement to provide the erase kind when
executing the corresponding op, but it was forgotten in this particular
spot.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement possibility to specify options for --start and --download
arguments.
These options are implemented as lists to better fit STM32CubeProgrammer
programming model.
This options are required to enable the programming of STM32N6 in USB-DFU
mode, which requires "-d my.bin 0x1 -s noack" arguments list.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
If a blob checksum does not match what is recorded in the
associated module.yml file, `west blobs fetch` should
(eventually) fail.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The `erase` command was being used but there was no "backend"
implementation for it in nrfutil nor nrfjprog. Simplify the syntax and
implement it for both tools.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These are used to detect if the firmware image contains any values
inside the UICR for additional handling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is no longer necessary, because thanks to sysbuild we no longer
invoke a runner with a .hex file that is the result of merging builds
for more than one core.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add an if clause to the CheckPatch Class that checks for windows os.
If windows os, check for perl installation.
If no perl installation present. Fail the check.
Without this change, CheckPatch can fail silently on windows,
as windows does not have a way to run perl scripts.
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
When pytest is executed, it only writes logging messages to the twister
harness, and does not include information about any test assertion
failures. This information is printed to stdout, so simply write
the contents stdout to the harness log.
Remove the log file arguments previously passed to pytest, as these are
no longer needed.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
Node properties are not created for all properties defined
by the node's binding (Binding.prop2specs),
only for those that actually have a value.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
PropertySpec.path does NOT tell "the file where the property
was last modified", but instead the binding file specifying
the devicetree node of which this is a property.
See: #65135
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
In `--coverage-per-instance` mode for 'gcovr' merge individual
coverage.json reports into the aggregate code coverage report
instead of processing .gcda data files again.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
With this change, the coverage data (GCOV dump) is extracted from the
test log files after each of the test instance parallel execution,
instead of post processing all the logs at the end of the Twister run.
The new `--coverage-per-instance` mode extends Twister coverage operations
to report coverage statistics on each test instance execution individually
in addition to the default reporting mode which aggregates data to one
report with all the test instances in the current scope of the Twister run.
The split mode allows to identify precisely what amount of code coverage
each test suite provides and to analyze its contribution to the overall
test plan's coverage. Each test configuration's output directory will have
its own coverage report and data files, so the overall disk space and
the total execution time increase.
Another new `--disable-coverage-aggregation` option allows to execute
only the `--coverage-per-instance` mode when the aggregate coverage
report for the whole Twister run scope is not needed.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Group Twister code coverage command line arguments for better usability.
Add more details in descriptions.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
MCUboot's imgtool requirement has been moved directly to MCUboot
which can be installed using west packages if needed, remove it
from Zephyr's requirements
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In situations where a test won't be run because there is a gap
in the hardware support, add the gap information to the "reason"
field to aid in debugging test cases.
With this change, the reason field for the error in test case
will show the gap:
e.g. reason field now updated with gaps
"No hardware support {'usbd'} but is one of the integration platforms"
Signed-off-by: David Leach <david.leach@nxp.com>
In commit 6e9e839195, an indirection via
the new `options` dictionary was missed in the SUIT handling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reverts commit 034c36cfad.
as it's part of a series of commits causing issues on Windows
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Actually using the error count before clearing it
would probably be more useful.
ExecutionCounter's error count was set to 0
before being used to lower the done count properly.
This should fix in-progress overcounting,
where Twister claimed to execute more tests than planned.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Add the option to flash a bin file if one is available from the board's
cmake configuration.
Use of elf has prio over this, and bin has prio over hex which remains
the default option.
Also add a parameter to stm32cubeprogrammer runner to specify the download
address.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The src-module argument can be used to select the module in which west
patch searches for patch definitions. This commit also allows the use of
module names instead of the path.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
Read and convert binary data in chunks of 1024 bytes, instead of 8 bytes.
This significantly reduces the conversion time. The improvement increases
with increasing file sizes but saturates to around 60-61% as file size
approaches 64MiB, and beyond.
The existing generated output format of eight byte-values per line is still
preserved.
Signed-off-by: Irfan Ahmad <irfan.ahmad@siemens.com>
Instead of pre-generating the JSON batch to then execute it, use
command-line arguments and --x-append-batch to generate the JSON file
tht will then be passed to x-execute-batch.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add 'images' as valid list in build info schema.
This allow sysbuild and regular Zephyr images to populate build_info.yml
with images included in the build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The ELF format allows for multiple string and symbol tables with
complex references between them. This is especially evident when
debugging information is included.
This patch fixes the issues that have been identified with multiple
string tables to allow LLEXT to properly parse those files:
* The symbol table used by LLEXT (LLEXT_MEM_SYMTAB) is now chosen
depending on the loaded file type, and other tables are ignored.
This change is also applied to the SLID injection script.
* The LLEXT string table (LLEXT_MEM_SYMTAB) is now correctly identified
by the symbol table reference, instead of picking the first one.
* VMA range checks only make sense for allocated sections.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Updated the code to use the font_color property, which
is the correct attribute for setting the text color in
recent versions of xlsxwriter (3.2.1).
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Refactor Reporting to use custom ReportingJSONEncoder and encode
all pathlib.Path derived instances there which are possible
e.g. in 'environment.options' received from command line.
Fixes: #83823
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The exception stack frame type `z_arch_esf_t` had been deprecated
since #73593 for 2 releases, it is not used in the kernel since, and
applications/drivers should have been updated to use the
`struct arch_esf` now, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add a new "hash" attribute to all Devicetree EDT nodes. The hash is
calculated on the full path of the node; this means that its value
remains stable across rebuilds.
The hash is checked for uniqueness among nodes in the same EDT.
This computed token is then added to `devicetree_generated.h` and made
accessible to Zephyr code via a new DT_NODE_HASH(node_id) macro.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add support for the `--erase` option on `west flash`, for boards that
specify at least one `--cmd-erase` option.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add a gh-fetch subcommand to the west patch extension to download a patch
file from Github and generate the patch meta data.
The patch info is appended to the patches.yml file.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The motivation for this patch was to improve the script's performance,
but some stylistic changes and cleanups are included as well.
The main optimization concerns the use of PyYAML, as it offers multiple
functions for interpreting YAML. The commonly used `load`/`safe_load`
converts a YAML stream to a dictionary. There are also `scan`, `parse`,
and `compose`, which return intermediate representations, the last one
being a graph. [1]
Since `gen_driver_kconfig_dts` scans DT bindings for compatible strings,
it only needs to look through top level keys in YAML. The intermediate
PyYAML graph is sufficient for this, and using it reduces the script's
execution time by about 30%, without making the code too complicated.
[1] - https://pyyaml.org/wiki/PyYAMLDocumentation
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Introduce sysbuild-specific variants of existing Kconfig checks:
* SysbuildKconfig
* SysbuildKconfigBasic
* SysbuildKconfigBasicNoModules
This involves a few additions to the base `KconfigCheck` class:
* Supporting a variable symbol prefix, to handle `SB_CONFIG_`.
* Generating extra files, including `Kconfig.sysbuild.modules`.
Although these are never sourced outside of sysbuild Kconfig,
they're still generated for every regular Zephyr build, so it's
natural to let all Kconfig checks follow this behavior.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
The KCONFIG_BINARY_DIR/{boards,soc,arch}/ directories are only relevant
for `KconfigCheck.get_v2_model()`, so generate them within this method.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
HWMv1-specific Kconfig checks were meant to be removed before HWMv2 was
merged into `main` (see `collab-hwm` history), but some traces remained.
Do another round of cleanup.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
So far, the behavior of different Kconfig checks has been parametrized
using the `run()` method, and every new check has introduced with it a
new argument to that method.
It's possible to replace each `run()` argument by way of overriding
different class methods and making better use of inheritance:
free=False Stub check_no_undef_outside_kconfig()
no_modules=True Stub get_modules()
filename Introduce class member FILENAME
hwm (unused)
This should establish a more scalable and straightforward pattern for
adding future Kconfig checks. It also favors composability, which will
come in handy when implementing checks for sysbuild Kconfig.
Additionally, avoid duplicating `doc` and `path_hint` in every subclass.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Device adapter strips all whitespace from output lines causing test
failures when matching default shell prompt "uart:~$ " with trailing
space. Update _handle_device_output to only strip line endings (\r\n)
while preserving whitespace required for prompt detection.
A testcase sample.pytest.shell.no_vt100 was added to verify prompt
matching works with CONFIG_SHELL_VT100_COLORS disabled.
Signed-off-by: Thomas Günther <thomas.guenther@limatica.com>
This commit removes all references to the `xtools` toolchain variant in the
twister scripts.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Extend Twister Harness 'recording' feature to allow multiple
regular expression patterns to extract different types of records
from test output.
Add 'merge' recording mode to collect all extracted data fields
into a single record object of the test instance.
Export to CSV file now takes all field names occurred in the collected
records, sort it alphabetically, and then use it for columns instead of
using only the first record's fields. This is done to address possible
situation when records have different set of fields.
Adjust Twister documentation and test suite to the above changes.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Make scripts with an interpreter line executable so that they can be
invoked directly.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
JLink refuses new RTT telnet connections for a few moments after a socket
closes. This causes an issue when using `nc` as the telnet viewer, since
JLink would deny the connection. To resolve this, keep the "ping" socket
we use to determine if the RTT viewer is active connected, and use that
socket for RTT communication.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
Add an argument `--esp-encrypt` to flash an ESP32 series chip with
encrypted flash.
The content of the binary is encrypted on the fly by the chip. It is
not required to know the encryption key. However, the fuses that
disable encrypted flash download must be kept enabled for this to work.
Signed-off-by: Martin Jäger <martin@libre.solar>
Mostly a revert of commit b1def7145f ("arch: deprecate `_current`").
This commit was part of PR #80716 whose initial purpose was about providing
an architecture specific optimization for _current. The actual deprecation
was sneaked in later on without proper discussion.
The Zephyr core always used _current before and that was fine. It is quite
prevalent as well and the alternative is proving rather verbose.
Furthermore, as a concept, the "current thread" is not something that is
necessarily architecture specific. Therefore the primary abstraction
should not carry the arch_ prefix.
Hence this revert.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
not force host variant if environment is setting something different in
the case of posix arch.
Fixes#83766
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Espressif branch of OpenOCD uses the version string "v0.12.0" instead
of "0.12.0" causing the version regex match to fail.
Add an optional 'v' prefix to avoid the failure.
Fixes: #83373
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
Add a series of unit tests which try to cover somewhat systematically
the possible inputs and what we finally get at the exit
of the Binding constructor.
Running the assumption that any (valid) YAML binding file is
something we can make a Binding instance with:
- check which properties are defined at which level (binding,
child-binding, grandchild-binding, etc) and their specifications
once the binding is initialized
- check how including bindings are permitted to specialize
the specifications of inherited properties
- check the rules applied when overwriting a binding's description
or compatible string (at the binding, child-binding, etc, levels)
Some tests covering known issues are disabled by default:
- this permits to document these issues
- while not causing CI errors (when running the python-devicetree
unit tests)
- enabling these tests without causing errors should allow us
to consider the related issues are fixed
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
Add runners entry to the module schema and import the file specified.
Every class that inherits from ZephyrBinaryRunner will be discovered and
added to runners list.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Added integration_toolchains to allow building/testing with multiple
toolchains available in the environment.
This changes the output structure and adds another level in the path
under twister_out signifying the toolchain used. The toolchain used
(variant) is also part of the json output now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since "JLink.exe" is also an executable distributed with JDK's, do an
explicit search on the standard SEGGER install directories for a JTAG
"JLink.exe" before falling back to whatever is first on PATH.
Fixes#51825.
Signed-off-by: Jordan Yates <jordan@embeint.com>
DIR is a POSIX type defined via the dirent.h header.
In Zephyr, we define it as `typedef void DIR`, since it is only
ever described via a pointer (much like `FILE`).
However, in checkpatch.pl, functions that return DIR* or accept
a DIR* argument are met with an error of the form below:
```
ERROR:SPACING: need consistent spacing around '*' (ctx:WxV)
```
Examples that trigger this false positive are, for example
```cpp
int dirfd(DIR *dirp);
DIR *fdopendir(int fd);
```
Include `DIR` as a class of specific POSIX types that should be
matched as types rather than other tokens.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
When looking at git author in a commit range using git log, explicitly
indicate we don't want to use the mailmap file (default git client
behavior is to use it), so that the "actual" author info from the commit
is used to perform the compliance check, and not whatever identity the
author may have mapped to in the mailmap file (ex. their "main" email
address might be different from the one they used to commit).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The cleanup pass (336c7da) to address long lines accidentally
removed a needed comma in the jlink runner.
Fixes#83605
Signed-off-by: David Leach <david.leach@nxp.com>
Using `west patch` with the `--patch-base`, `--patch-yaml` or
`--west-workspace` option results in an unhandled AttributeError in
filter_args() because the function expects these args to be of type
path. Adding the type to the argument definition forces argparse to
create variables of type path.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
scripts/checkpatch.pl was written originally for the Linux kernel, and
its code reflects the kernel's coding style. In particular, it has
checks for unneeded braces around single-statement if/else/for/while
conditions. In Zephyr however, braces are always required, and so the
checks needed modifying to verify the opposite condition.
In order to enable the now-compatible checks, we also remove the
--ignore BRACES statement in .checkpatch.conf.
Limitations: the current code works well if there are not conditional
statements (e.g. #if, #ifdef or #endif) next to the if/else/for/while
conditions. This is rarely the case, but triggers with the Bluetooth
controller in code like this:
```
#if defined(CONFIG_BT_PERIPHERAL)
if (!lll->is_hdcd)
#endif /* CONFIG_BT_PERIPHERAL */
{
```
```
} else
#endif /* CONFIG_BT_CTLR_PRIVACY */
{
```
```
#if defined(CONFIG_BT_CTLR_DF_ADV_CTE_TX)
if (lll->cte_started) {
radio_switch_complete(phy_s, 0, phy_s, 0);
} else
#endif /* CONFIG_BT_CTLR_DF_ADV_CTE_TX */
{
```
```
#ifdef DUAL_BANK
while ((FLASH_STM32_REGS(dev)->SR1 & FLASH_SR_QW) ||
(FLASH_STM32_REGS(dev)->SR2 & FLASH_SR_QW))
#else
while (FLASH_STM32_REGS(dev)->SR1 & FLASH_SR_QW)
#endif
{
```
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add support for .cold and .coldrodata sections, used to implement
a cold module. Assigning code and read-only data to those sections
makes them suitable for use in a cold module, stored and executed in
slow memory.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Adds support for sysbuild loading snippets, these can be included
by using e.g.: cmake ... -DSB_SNIPPET=blah for sysbuild
directly or can be used with an application and sysbuild using
-DSNIPPET. Snippets for sysbuild can use SB_EXTRA_CONF_FILE in the
snippet file to specify an extra Kconfig fragment for sysbuild
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In smaller projects and organizations, forking Zephyr is usually
a tenable solution for development continuity, in the case that
bug-fixes or enhancements need to be applied to Zephyr to
unblock development.
In larger organizations, perhaps in the absence of healthy patch
management, technical debt management, and open-source policies,
forking and in-tree changes can quickly get out of hand.
In other organizations, it may simply be preferable to have a
zero-forking / upstream-first policy.
Regardless of the reason, this change adds a `west patch`
command that enables users to manage patches locally in their
modules, under version control, with complete transparence.
The format of the YAML file (detailed in a previous comit)
includes fields for filename, checksum, author, email, dates,
along with pr and issue links. There are fields indicating
whether the patch is upstreamble or whether it has been merged
upstream already. There is a custom field that is not validated
and can be used for any purpose.
Workflows can be created to notify maintainers when a merged
patch may be discarded after a version or a commit bump.
In Zephyr modules, the file resides conventionally under
`zephyr/patches.yml`, and patch files reside under
`zephyr/patches/`.
Sample usage applying patches (the `-v` argument for additional
detail):
```shell
west -v patch apply
reading patch file zephyr/run-tests-with-rtt-console.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/twister-rtt-support.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/multiple_icntl.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/move-bss-to-end.patch
checking patch integrity... OK
patching zephyr... OK
4 patches applied successfully \o/
```
Cleaning previously applied patches
```shell
west patch clean
```
After manually corrupting a patch file (the `-r` option will
automatically roll-back all changes if one patch fails)
```shell
west -v patch apply -r
reading patch file zephyr/run-tests-with-rtt-console.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/twister-rtt-support.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/multiple_icntl.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/move-bss-to-end.patch
checking patch integrity... FAIL
ERROR: sha256 mismatch for zephyr/move-bss-to-end.patch:
expect: 00e42e5d89f68f8b07e355821cfcf492faa2f96b506bbe87a9b35a823fd719cb
actual: b9900e0c9472a0aaae975370b478bb26945c068497fa63ff409b21d677e5b89f
Cleaning zephyr
FATAL ERROR: failed to apply patch zephyr/move-bss-to-end.patch
```
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add UF2 Family ID for Raspberry Pi 2350 and build
UF2 image by default for Pico 2 board
Signed-off-by: Ryan Grachek <grachek@gmail.com>
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Instead of unconditionally erasing the whole target, add
support for using the common --erase flag.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
using "dt_node_prop_enabled" to filter out supported platforms
1. check node existing.
2. check prop in node.
3. check the prop is True.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This reverts commit 9d849d92bf that seems to
be causing dozens of basic kernel test failures across various platforms.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The west packages extension can be used to install module dependencies.
Upstream nanopb has added the pip package dependencies to the
zephyr/module.yml file. Remove in-tree pip package dependencies.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The ecpprog command is an utility written by Greg Davill for flashing
FPGAs such as ECP5 or CrossLink-NX series. Devkits typically have an
FTDI interface chip to access the external flash. FPGA image is
typically at flash offset 0x00000000 flash offset, and the Zephyr
image offset can be set via CONFIG_FLASH_LOAD_OFFSET.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Add new '--start-address' argument to the STM32CubeProgrammer west runner.
This argument can be used to specify an address from which the MCU should
start executing, instead of relying on the default value in CubeProgrammer.
Also update STM32CubeProgrammer runner tests to support new argument.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Pass a test failure reason text from harness to the instance
to convey more details on the failure.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Set missing TestCase statuses when a test under the BinaryHandler failed
(crashed), so remaining 'STARTED' and 'NONE' are now 'BLOCK' instead.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
