SUBALIGN forces alignment to the specified value, even if the object
requires stricter alignment. This causes mis-aligned access when accessing
the resulting value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Ensure that qemu_x86 (the integration platform) is on the allow list
for `sample.net.sockets.socketpair.s32k148_evb`.
```
INFO: Error found: sample.net.sockets.socketpair.s32k148_evb on
qemu_x86/atom (Not in testsuite platform allow list but is one of the
integration platforms)
```
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
OpenThread stack prints just too much data at the info log level,
completely obfuscating the output of the sample, which prints a lot on
its own. Therefore, lower the log level for OT logs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update the response callback function signature to allow the callback to
return an error code, which in turn will cause the HTTP client to abort
the download.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some OpenThread logs were moved from L2 to the OpenThread module,
so enable logging from there to keep previous logging visibility.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Move the common tunnel setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
OVERLAY_CONFIG has been deprecated and replaced by
EXTRA_CONF_FILE. Update samples to reflect that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add `overlay-dhcpv4.conf` for using this sample with DHCPv4.
When the DHCPv4 client is enabled, we must have a large number
for `CONFIG_ZVFS_EVENTFD_MAX`.
This sample may be frequently used with the DHCPv4 client,
so we'll add the extra config file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Clarify the documentation in the README.rst file. Also remove the
obsolete comment from main.c as it is no longer correct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Expect that networking is properly setup, by expecting
NET_EVENT_L4_CONNECTED event and listening for TCP/UDP incoming traffic on
both IPv4 and IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
CONFIG_ETH_NATIVE_POSIX is deprecated in favor of
CONFIG_ETH_NATIVE_TAP, let's replace it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename this driver to eth_native_tap, including renaming all its
options.
The old options remain until v4.4, but as deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Lookup the address of the SNTP server through DNS instead of requiring
a server to be running locally.
Signed-off-by: Jordan Yates <jordan@embeint.com>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
Remove the twister support for native_posix[//64] and therefore all
references to them from the testcases and samples yamls, so twister
does not error out.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Call coap_client_cancel_requests() before closing the client socket so
that all activities on that socket are ceased before close. This
prevents POLLNVAL error from being thrown by the coap_client thread and
error being printed in the sample output.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add frdm_mcxw7 board conf and overlay files for echo_client and
echo_server sample applications.
Signed-off-by: Andrei Menzopol <andrei.menzopol@nxp.com>
"ca.der" contains an RSA key, but this file is now useless for this sample
as the sample is using EC keys. It's likely a leftover from some initial
development, so it can be removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add a section with a practical example on how to build the sample in
order to test it with:
- real device
- ethernet over USB
and test it with a Linux host system.
Fix also references to overlay files that must be enabled to build the
HTTPS version.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit also moves the TLS (overlay) configuration to a separate file
named "overlay-tls.conf". In this way the simple HTTP (without TLS) will
not enable Mbed TLS.
A new test case is added to sample.yaml to test HTTPS scenario.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
A _res_fallback parameter to HTTP_SERVICE_DEFINE is added to optionally
specify a fallback resource detail, which will be served if no other
resource matches the URL.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
This issue is seen by at least gcc 11.4.0
samples/net/sockets/http_get/src/http_get.c:44:40: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2
has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
44 | #define CHECK(r) { if (r < 0) {
| printf("Error: %d\n", r); exit(1); } }
| ^~~~~~~~~~~~~
samples/net/sockets/http_get/src/http_get.c:44:49: note: format string is
defined here
44 | #define CHECK(r) { if (r < 0) {
printf("Error: %d\n", r); exit(1); } }
| ~^
| |
| int
| %ld
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This sample is expected to hit google.com so that the reply
(a redirect) is minimal and can easily be visualized. This is also
what sample.yaml expects to see (checks for "The document has
moved").
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add overlay and small adjustments for using the hl7800 modem.
Works out of the box with pinnacle_100_dvk and mg100.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Disable vt100 commands too in websocket console, not only the coloring.
This allows to prevent printing artifacts in websocket shell backend
logging.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Passing HTTP upgrade request context to the user callback allows the
user to decide whether to accept or reject the websocket connection
based on the HTTP headers in the request. The primary reason for this is
to enable authentication of the websocket connection (e.g. via cookies
or Authorization header).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
By default OpenThread uses storage API to store configuration options.
On for example mimxrt1020_evk the enabled by default is
CONFIG_SETTINGS_NONE when CONFIG_SETTINGS is enabled. Fix this problem by
using the CONFIG_SETTINGS_NVS=y.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This sample works without increasing ZVFS_OPEN_MAX and ZVFS_POLL_MAX to
some arbitrary number. This also removes a duplicate entry for
ZVFS_OPEN_MAX.
ZVFS_OPEN_MAX already defaults to a reasonably large value of 16 if
POSIX_API is enabled, which is the case for the echo_service sample.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
This description provides information about setting up RCP (nRF21540-DK)
and OT HOST (mimxrt1020_evk) to communicate with HOST PC's echo_server
via OpenThread Border Router (OTBR).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This overlay configures the imxrt1020 EVK board to use its lpuart2 serial
port to communicate with other board (in this case nRF21540-DK), which
is the RCP for OpenThread protocol.
The nRF Zephyr RCP is the one from Nordic (v2.7.0):
west build -p always -b nrf21540dk/nrf52840 -S logging
nrf/samples/openthread/coprocessor
The same UART (on nRF) can be used for testing/debugging purposes with
using the ot-cli's SPINEL communication program:
sudo ./build/posix/src/posix/ot-cli 'spinel+hdlc+uart:///dev/ttyACM1?u
art-baudrate=1000000' --verbose
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This config allows setting up the echo_client program with
RCP HOST UART (via SPINEL protocol) communication.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Testcase uses certificates from the sample application at
samples/net/sockets/http_server. These were modified and moved into a
different folder by a previous commit, causing a build failure in the
test.
Testcase updated to:
- use new path to certificates
- update available cipher suites, since certificates now use ECDSA
- update expected hostname in certificate
The CA certificate in the sample app is also converted to .der format
for inclusion in the test (the content is exactly the same as the PEM
version, just converted to DER).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
MONOLITHIC_NXP_NBU cannot be used in CI as it relies on firmware blobs
to be fetched.
Disabling the feature so the CI can pass.
Also tagging this test as build_only.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
