Add initial support for TI MSPM0 UART with basic poll-in and poll-out
functionality.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Signed-off-by: Jackson Farley <j-farley@ti.com>
Add a reusable uart-bridge driver that echoes data between two serial
devices. It's mainly meant to be used with one of the devices being an
USB CDC-ACM, the data is buffered, there's a pause feature to stop the
USB endpoint when the hardware UART is filling up to avoid overrun and
there's a helper function used to propagate the USB uart configuration
to the hardware one.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add minimal support for the aesc silicon UART IP core.
This core includes an internal clock divider and supports flexible
frame configurations, allowing for variable data length, parity, and
stop bit settings.
The current driver version does not support interrupts.
Signed-off-by: Daniel Schultz <dnltz@aesc-silicon.de>
Intial serial driver support for RX MCU, this driver utilize
the SCI HWIP for uart communication
Current support include polling API and Interrupt driven API,
some of the code is using Renesas RX Driver Package (RDP) as
hal layer
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Sang Tran <sang.tran.jc@renesas.com>
Add Bouffalo Lab serial driver. The driver uses pinctrl to configure
pins and have power management capabilities.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Split the USART driver into separate implementations for Silabs Series 2
and Series 0/1 boards. This change improves maintainability (especially
with the support of pin-ctrl and clock-ctrl on series 2 boards).
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
We add a serial UART driver for Microchip MEC5 HAL based chips.
The driver supports polling, interrupts, and runtime configuration
features. Power management will be implemented in a future PR.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This is the initial commit to support UART driver for Renesas RZ/G3S.
The driver only implements polling API for minimal support.
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Binh Nguyen <binh.nguyen.xw@renesas.com>
This commit adds the usart driver for WCH CH32V003.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
Simple cosmetic change to convert all the source commands
to rsource so that includes are relative to driver/serial.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enables usage Bluetooth LE GATT as a serial endpoint to exchange data
using UART APIs. This implementation is compatible with UART Interrupt
Driven APIs and uses the nus-uart device-tree node properties to
configure FIFO buffers for transmitting and receiving. Defining
multiple instances of the driver is possible and it allows implementing
multiple GATT NUS service instances to exchange data as separate serial
endpoints.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add adaptation layer which allows to provide interrupt driven
API for drivers which exposes only asynchronous API.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This adds a UART driver for the Renesas RZ/T2M
Serial Communication Interface.
The driver implements:
* Polling API,
* Interrupt-driven API.
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
Add module which can handle RX path of UART asynchronous RX API. Module
can be utilized in cases where processing of received data is not performed
directly in the event context but it is delayed. At least two use cases
has been identified (shell async UART backend, asynchronous to interrupt
driven adaptation layer).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adding initial support for Renesas RA UART.
To avoid complicating initial code for supporting the SoC,
I have implemented only the bare minimum for now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Enable driver for intel lw uart.
Changes from review:
- refactor spinlock to inside of loop
- use menuconfig for kconfig
- add CONFIG_UART_INTEL_LW_AUTO_LINE_CTRL_POLL
Signed-off-by: Teoh Shi Lin <shi.lin.teoh@intel.com>
Adds a new serial shim driver for Intel SoCs. Builds upon the SEDI bare
metal UART driver in the hal-intel module.
Signed-off-by: Nachiketa Kumar <nachiketa.kumar@intel.com>
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Both the IRQ API and Asynchronous API support callback.
However, since they are both interrupt driven, having
callbacks on both API would interfere with each other
in almost all cases. So this adds a kconfig to signal
that the callbacks should be exclusive to each other.
In other words, if one is set, the other should not
be active. Drivers implementing both APIs have been
updated to remove the callbacks from the other API.
Though, this still leaves the option to disable
the kconfig and allows both APIs to have callbacks
if one desires.
Fixes#48606
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add Nuvoton numaker series UART support, including interrupt-driven,
also apply pinctrl and clock-control.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Add support for communication with serial ports on native POSIX platform
via UART driver API. Serial port driver supports polling API,
configuration of the serial ports used via devicetree and command line
options, and runtime configuration with `uart_configure`.
Multiple instances of the driver are supported.
Example use and configuration is also demonstrated in the
`samples/drivers/uart/native_tty` sample.
Closes: #56586
Signed-off-by: Marko Sagadin <marko.sagadin42@gmail.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for virtual UART device that uses ARC Hostlink channels
for data transfers. Due to the Hostlink principle, this driver
supports only polling API.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Added initial version of Infineon CAT1 UART driver.
Added initial version of binding file for Infineon CAT1 UART driver.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Following updates previously done for other drivers, rename all
occurrences of S32 to NXP S32 to avoid ambiguity.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
USB interface that may be used to send messages from a USB host to
the M4 processor in the S3B, and vice-versa.
Signed-off-by: Michal Sieron <msieron@antmicro.com>
This patch introduces support for NXP S32 LINFlexD peripheral operating
in UART mode. Polling and interrupt-based serial API's are supported.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
This adds serial driver for Renesas SmartBond(tm) family. Both polling
and interrupt APIs are supported.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
