SUBALIGN forces alignment to the specified value, even if the object
requires stricter alignment. This causes mis-aligned access when accessing
the resulting value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add clear, step-by-step guide for generating test certificates using
FreeRADIUS scripts, including file renaming and usage notes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
* Remove the obsolete path reference, command is enough
* Add a note for the volatility of the certificates
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update the response callback function signature to allow the callback to
return an error code, which in turn will cause the HTTP client to abort
the download.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sizeof operator applied to a pointer to
char does not return the number of characters.
This leads to the message being cut off.
Instead we should use strlen.
Signed-off-by: Sandro Scherer <sand.scherer@gmail.com>
Add an entry to the release note to inform about the new
CONFIG_OPENTHREAD_SYS_INIT Kconfig option.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Note the ability to upload custom data in the documentation, and add
it to the release notes.
Also include the new `CONFIG_ZPERF_SESSION_PER_THREAD` option.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Use -w option to delay the startup of the upload job.
Then when ready, do "zperf jobs start" to launch all upload
sessions at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has enabled CONFIG_ZPERF_SESSION_PER_THREAD, then if
user gives -a (async) option to upload command, then multiple
uploads can be run simultaneously. Each upload will be run
in a dedicated work queue. The work queue thread priority can
be set by -t option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update iperf version information for use with zperf. Note the fallback
kconfig option for versions older than `2.0.10`, and remove the warning
about `LAST PACKET NOT RECEIVED!!!` since it is not longer present with
the fixed UDP header.
Signed-off-by: Jordan Yates <jordan@embeint.com>
For enterprise mode we need to install multiple certs to the TLS
credentials store, so, add a helper script in python to make it work
cross-platforms.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The command should work with existing certs rather than a generic
example, also fix the key-management.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
RSA3K based certs are not supported on all platforms, so, keep both
variants, rsa2k (the older certs but with longer expiry 9999 days) and
rsa3k (latest ones) and we can have more variants in this folders.
Also, add a cmake variable to override the path with default as rsa3k.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Instead of having an overlay move the Enterprise configurations to a
dedicated snippet so that it can be enabled with any sample.
Can be used along with Wi-Fi snippet e.g., `-S
"wifi-ipv4;wifi-enterprise"`.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Using TLS credentials library add support for run-time certificates where
the installed certs are retrieved from the credential store (as of now
only volatile backend is tested).
This helps in production environments.
Implements #79564.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add a "net filter" command that will allow user to see the
current network packet filter configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
"native POSIX" in Zephyr's context is typically understood as something
else than what this text refers to. Let's rephrase it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add the documentation on how to use the commandline options to set the
IPv4 addr, gateway and netmask of a native_sim setup.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Rename this driver to eth_native_tap, including renaming all its
options.
The old options remain until v4.4, but as deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add documentation showing how to use the _detail parameter when
registering an HTTP service to provide a default resource handling any
unknown path. Also update the 4.1 release migration guide.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Update HTTP server documentation and migration guide to account for
added request_ctx parameter to the http_resource_websocket_cb_t
callback.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Dynamic resource callback function signature has changed to combine the
data, data length and request header details into a struct
http_request_ctx. Update documentation to describe this, and add a note
in the 4.1 migration guide since this is a public API change.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Fixes: #78010
This commit implements the "Gateway Advertisement and Discovery" process
defined in section 6.1 of the MQTT-SN specification.
This includes breaking changes to the transport interface and the default
included UDP interface implementation as support for UDP multicast
messages is added as implemented by the Paho MQTT-SN Gateway.
Signed-off-by: Kenneth Witham <kennywitham4@gmail.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This updates the documentation of all the Qemu boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Atmel boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for station.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
