Commit adds description of key representation incompatibility
for mesh images built with different crypto libraries.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Specifies that the `CONFIG_BT_MESH_SHELL_DFU_METADATA` must be enabled
to use the `dfu metadata` commands in the mesh shell.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds documentation for the mesh shell blob flash stream feature. This
feature allows the user to specify the flash area to write the BLOB to.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Renames the blob cli bounds command to blob cli caps in documentation,
matching the implementation in shell.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Aligns subnet bridge related commands according to conventions used for
rest of the shell commands. Also updates documentations to reflect the
change.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adds support for using relay buffers and advertising set for the subnet
bridge feature, even if the relay feature is disabled.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds the `bt_mesh_brg_cfg` prefix to the public Subnet Bridge API, and
aligns the function and callback naming with the rest of the Bluetooth
Mesh API.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds implementation for the Bridge Configuration Server model.
Updates `brg_cfg` module to add sanity check for
bt_mesh_brg_cfg_tbl_remove() API. Also, updates the unit test
accordingly.
Adds documentation for the Bridge Configuration Server model
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Implements the Bridge Configuration Client model.
Adds opcodes for all Bridge messages to `foundation.h`. Adds client-side
support for these messages.
Adds a new Kconfig option for the Bridge Configuration Client model to
configure the waiting time for respones for acked messages.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
The bt_mesh_cfg_srv structure was removed in ad2fd44d7a, no need to
keep this text here anymore.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
While Breathe seems to not care and creates hyperlinks either way, the
proper role to mention a C enumerator is :c:enumerator:. :c:enum: is to
be used to refer to the enum itself.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added clarification on AES-CMAC usage in DFU metadata, emphasizing its
sole role as a hashing function for the incoming composition data hash.
Notably, it utilizes a fixed key and is not employed for encryption
purposes.
Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no>
Commit adds description of the Large Composition Data
client's shell commands into documentation.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Fixes misleading docstring for input of core type for the
mesh models dfu metadata encode command.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Add a note to the access randomization feature that reordering can
happen and what should be done to avoid it.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the doc/connectivity/bluetooth directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Bluetooth Mesh Protocol 1.1 is backward compatible with Bluetooth Mesh
Profile 1.0.1, therefore the stack can still be qualified for 1.0.1 if
needed. But explicit support for both versions requires additional
maintenance efforts and doubles the CI time. To make the stack
qualifiable for 1.0.1, the one needs to remove Private Beacons reception
and compile out SHA256 algorithm support.
What is changed:
- Removed `CONFIG_BT_MESH_V1d1` option.
- Removed `transport_legacy.c` which was using 1.0.1 implementation. The
new transport layer has new SaR logic that should still be possible to
qualify for 1.0.1.
- Removed the legacy transport Kconfig options. They are superseded by
the new transport Kconfig options.
- Tester app: `overlay-mesh-v1d1.conf` is merged into
`overlay-mesh.conf`.
- Removed BabbleSim tests for 1.0.1.
- Updated documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The section 3.7.3.1 of the mesh specification recommends to delay
a message publication in certain cases:
- at power-up or upon state change for a time between 20 to 500 ms
- for periodic publications for a time between 20 to 50 ms
This change implements this recommendation by adding the
`CONFIG_BT_MESH_DELAYABLE_PUBLICATION` Kconfig option which enables
the randomization code and by adding the `bt_mesh_model_pub.delayable`
bit field which allows each model decide whether the publications
should be delayed for this model or not.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
SIG has changed Bluetooth mesh to Bluetooth Mesh
Updating zephyr docs accordingly
Leaving out old release notes
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The ability to send the solicitation PDU doesn't
depend on GATT Client role.
Commit makes independent one functionality from
another.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Improves the documentation about how CDP 128, 129 and 130, as well as
Models Metadata Page 128 are created, as well as which functions the
application will have to call to store the correct contents in the
pages.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
Updates Bluetooth mesh specification references:
- Change "Profile" to "Protocol" since the main specification has
changed its name.
- Update/align formating of specification references. This will
make it easier to find spec references in the future.
- Change some section references to point to the correct section of the
newest version of the specification (v1.1).
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixed a few occurrences of incorrect references to Kconfig options
(missing the CONFIG_ prefix)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Correct DFU and BLOB models specs names. Also mentioning that they are
experimental yet (under BT_MESH_V1d1 option).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
While it doesn't seem to be an issue for HTML rendering, the use of
\verb is not allowed within LaTeX equations and breaks the PDF build.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This adds support for the Upload OOB Start message to the DFD server, by
providing callbacks that the application can use to hook any OOB scheme
into the model behavior.
There are also extensive changes to the dfu_slot module, to accomodate
the new needs that appeared with the support for OOB transfer (mainly,
fwid, size and metadata are no longer available when the slot is
allocated, they appear later in the handling).
Signed-off-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
According to https://github.com/zephyrproject-rtos/zephyr/pull/61886#issuecomment-1713302331
we need to use "must only" for models that spec states:
`If supported, ... shall be supported by the primary element and shall
not be supported by any secondary element`.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adding rst files describing SAR Configuration
models, SAR Configuration Client and SAR Configuration
Server.
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
Add missing bt_mesh_dfd group to the mesh DFU documentation page as it
covers all DFU models including Firmware Distribution models (called
as `dfd` in the code).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
