Add gpio support for STM32MP257F-EV1 board.
Add the orange (&led0) LED to the device tree and enable GPIOJ.
Add the user button USER2 to the device tree and enable GPIOG.
This step allows building and debugging the blinky and button sample
applications.
Signed-off-by: Youssef Zini <youssef.zini@savoirfairelinux.com>
Introduce DeviceTree binding for the STM32MP2 RCC clock controller,
enabling support for STM32MP2-specific clock configuration in Zephyr.
Update Kconfig.stm32 to add a dependency on STM32MP2 configuration,
allowing the use of STM32 LL RCC features when targeting STM32MP2
devices.
Add header for STM32MP2 per peripheral clock definitions.
Signed-off-by: Youssef Zini <youssef.zini@savoirfairelinux.com>
Introduce initial board support for the STM32MP257F-EV1. This includes:
- Board metadata (board.yml, stm32mp257f_ev1.yaml)
- Base software configuration (Kconfig.stm32mp257f_ev1)
- CMake build integration (board.cmake)
- Default configuration (stm32mp257f_ev1_stm32mp257fxx_m33_defconfig)
- Minimal device tree (stm32mp257f_ev1_stm32mp257fxx_m33.dts)
- Initial documentation and image for the stm32mp257f_ev1 board.
- OpenOCD configuration files for debugging support.
This enables the STM32MP257F-EV1 board to build and debug a hello world
sample.
Note that other necessary openocd configuration files are added to the
zephyr sdk directory and can be found in the stm-openocd repository[1].
[1]:https://github.com/STMicroelectronics/device-stm-openocd/tree/main
Signed-off-by: Youssef Zini <youssef.zini@savoirfairelinux.com>
Add external HSPI flash on STM32U5G9J-DK2
Use external loader to flash it with STM32CubeProgrammer
Signed-off-by: Mathias Markussen <mathias.markussen@st.com>
The DTS for this board contained a few mistakes:
* The PHY address was incorrect
* This did not impair functionality because the RTL8211F
treats address 0 as "broadcast" and accepts commands
sent to it by default
* An incorrect PHY driver was used
* The generic "phy_mii" driver is not the most appropriate
for this PHY - use the HW-specific RTL8211F driver instead
* Also remove the PHY IRQ pin configuration from Ethernet
pinctrl to allow RTL8211F driver to receive IRQ via GPIO
instead
* The RGMII GTX CLK pinctrl must be configured at "medium-speed"
* This is a temporary solution. The proper solution would use
very-high-speed combined with a GPIO delay, but delays are
not supported yet in Zephyr.
Signed-off-by: Mathieu CHOPLAIN <mathieu.choplain@st.com>
Call entropy APIs to use TRNG peripheral on STM32WB0x devices for BLE
purposes.
Enable RNG node on Nucleo-WB0x boards.
Remove RNG initialization as it's done in the entropy driver.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Specify the Arduino serial node for a Discovery kit with STM32H573II MCU.
Add supported features to board yaml file.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
There was a missing irq-gpios property that cause
building failure on lvgl and display samples.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Adds skeleton dtsi for u5f9 for u5g9 to inherit from
Moves the peripheral nodes into dtsi's that actually has the peripheral
and includes them for SoC's higher in the series where applicable.
signed-off-by: Harris Tomy <harristomy@gmail.com>
Add csi_22pins_connector and related label in order to use
shields relying on csi_pins_connector.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Add configuration of the IC17 and IC18 clock dividers, used
by the dcmipp and csi IPs in the stm32n6.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
The camera connector in stm32h7b3i_dk (and st_b_cams_omv_mb1683 shield)
are refering to the connector name as dmci_... instead of dcmi_...
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Add a board-specif dts overlay file for the adc_dt sample on the
STM32F4-DISCO board to enable for ADC channel support.
Signed-off-by: Ajith Anandhan <ajithanandhan0406@gmail.com>
Add board-specific overlay file for the adc_dt sample
on the STM32F0-DISCO board to enable ADC channel support.
Signed-off-by: Sudarsan N <sudarsansamy2002@gmail.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Don’t insert empty lines before a dedenting };.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Indent with tabs.
- Don’t insert empty lines before a dedenting };.
- Insert a single empty line to separate nodes at the same hierarchy level.
Also remove a few spurious space characters.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Indent with tabs.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Don’t insert empty lines before a dedenting };.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Indent with tabs.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Indent with tabs.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
By the way, also correct indentation in node stm32_lp_tick_source of
b_g474e_dpow1.dts.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Indent with tabs.
- Don’t insert empty lines before a dedenting };.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Indent with tabs.
- Don’t insert empty lines before a dedenting };.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Indent with tabs.
- Don’t insert empty lines before a dedenting };.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Fix board DTS coding style issues to prevent they spread when a new
board is introduced and used this DTS as example start point.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Don’t insert empty lines before a dedenting };.
- Insert a single empty line to separate nodes at the same hierarchy level.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Add the XSPI 2 which is an octoSPI connection to a octo NOR flash
mx66uw1g45 on the stm32h7s78_dk disco kit
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the XSPI 2 which is an octoSPI connection to a octo NOR flash
MX25UW25645GXDI00 (256 Mbits, 1.8 V, 200 MHz, DTR, rww)
on the nucleo_h7s3l8 board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- enable spi3 and usart3 nodes for driver test purpose.
- delete usart1 node due to conflicting pins with i2c1
node
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
- The stm32h573i_dk board uses a ft3267 i2c controller for the touchscreen
connected on i2c4.
- The zephyr driver ft5336 can control it.
- Use the I2C STM32 V2 Timing calculation.
Signed-off-by: Samuel Quiniou <samuel.quiniou@rtone.fr>
The OpenOCD STM32-specific configuration was included into the common
configuration, which was then used in board files. Follow nRF5
convention instead: use manufacturer-specific config in boards.
Also due to the fact that the include of STM32-specific config was
placed *after* board_finalize_runner_args() it didn't really work
anyways.
Signed-off-by: Marek Metelski <marek@metelski.dev>
