Remove the esp32_devkitc_wroom board as near identical with wrover
variant. The differences of the two boards are covered by the user config.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Catch up on some of the boards recently added as well as some that were
missed in the previous batch update.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add .. zephyr:board-supported-runners:: to the Programming and Debugging
section of the documentation for each board that has one such section,
as this is the most natural place to put it.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enable wifi node in all procpu dts, so Wi-Fi could be enabled simply by
enabling the CONFIG_WIFI. In turn some sample code overlay files can be
dismissed.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add ULP Coprocessor board support for C6.
This requires a change in the board qualifier depending on the build
target.
Update esp32c6 overlay and configuration files to the proper name.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
ESP32-S2 and ESP32-C6 does not have or support
bluetooth. Ignore any tests cases related to this peripheral.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes the the node value of zephyr,sram for the following boards:
- esp32s2_devkitcc
- esp32s2_saola
- esp32s2_franzininho
- esp32s2_lolin_mini
- ttgo_t7v1_5_esp32
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Use a string for the mipi-mode property over an integer value, as this
significantly improves the readability of the MIPI DBI device binding.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
* Replace copies of fixed-partitions nodes in related boards by
referencing the apropriate partition table from the available list.
* For better reference the `partitions_*.dtsi` file has boot offset,
purpose and the flash size encoded in the file name. Default flash size
is considered to be 4MB.
* Added the flash size node for the boards which are not based on the
module.
* Removed flash size registry from the esp32.*common.dtsi
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Use configdefault when enabling LV_COLOR_SWAP_16 within boards and
shield definitions, to avoid OR'ing the dependencies for the Kconfig
symbol. Otherwise, a user manually selecting LV_COLOR_DEPTH will
encounter build errors as LV_COLOR_SWAP_16 may be enabled when
LV_COLOR_DEPTH_16 is not selected
Fixes#81546
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix missing flash and code partition.
Add missing dts entries and use common partition tables to all related
non-Espressif boards, previously ommited.
Add uart1 node in pinctrl for APPCPU.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This updates the documentation of all the Espressif boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
As per board porting guidelines, the board image should be named after
the board.
This commit implements the changes for boards found to be non-compliant.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
HEAP_MEM_POOL_ADD_SIZE_BOARD is not a zephyr-defined entry and
should be placed into Kconfig instead of Kconfig.defconfig.
This PR moves that entry for all ESP32-based boards accordingly.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
fixed some ReST/Sphinx lint issues missed in earlier cleanups
prior to introducing Sphinx-linter in compliance check
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This PR updates all Espressif board names to meet its
original value. It also update reference links, re-organize
entries and removes unused content.
This also fixes bootloader information regarding a few boards.
IDF Bootloader was removed and these boards kept that info.
This updated it accordingly with the Simpleboot Bootloader.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
