Add some overlay files for the silabs xg29_rb4412a board to enable tests
on the board. Also add the platform to some testcase.yaml files.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Add a test case for the alignment support in loadable extensions. This
test case creates a set of constants with specific alignment requirements
and verifies that they are placed in memory as expected.
Fix the detached section test to use a more standard syntax for the
section attribute, avoiding issues with different toolchains.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Previously the net_linkaddr struct had pointers to the link address.
This is error prone and difficult to handle if cloning the packet as
those pointers can point to wrong place. Mitigate this issue by
allocating the space for link address in net_linkaddr struct. This will
increase the size of the net_pkt by 4 octets for IEEE 802.15.4 where the
link address length is 8, but there no increase in size if link address
is 6 bytes like in Ethernet/Wi-Fi.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Clarify that all max limit on RTOS objects set by Kconfig only apply
to objects whose control blocks were dynamically allocated. The
CMSIS-RTOSv2 impl layer itself does not restrict the number of
statically created RTOS objects.
Signed-off-by: Utsav Munendra <utsavm@meta.com>
Clarify thread Kconfigs to denote the maximum number of dynamically
allocated control blocks and stacks for threads. Allow application to
create any number of threads with statically allocated control block
and stack.
Signed-off-by: Utsav Munendra <utsavm@meta.com>
The zbus hlp_priority_boost test requires thread priority
boosting. If it is running SMP, it is possible that
the message has already been processed before the check
for priority boosting is done, thus failing the test.
So change the test to use 1 CPU only.
Fixes#79197
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On top of enabling and allowing test entropy sources, enable
CONFIG_ENTROPY_GENERATOR so that a real driver and entropy source gets
used if available.
This is needed for some PSA Crypto implementations that have random number
generation conditionally compiled in.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Some implementations require more stack than others.
Increase the Ztest and main stack sizes to accommodate them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Use dynamic allocation for key material for
better compatibility as a fully static key store is a new
feature that not all PSA Crypto implementations support.
Explicitly enable CONFIG_MBEDTLS_ENABLE_HEAP to ensure that Mbed TLS uses
heap for the PSA keys' data (instead of failing at runtime).
This will turn off CONFIG_MBEDTLS_PSA_STATIC_KEY_SLOTS, making the
implementation default to dynamic key slots.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Explicitly enable CONFIG_ENTROPY_GENERATOR instead of relying on the
build system's defaults.
This:
- Makes sure the filtering works properly between entropy_driver and
entropy_not_secure test scenarios for the samples.
- Helps with TF-M builds in certain scenarios where key generation (via
`psa_generate_key()`) would fail due to the RNG functionality being
disabled.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The psa_key_attributes_t type is implementation-defined according to
the PSA Crypto spec.
Compare its fields individually instead of doing a memcmp() over the
entire struct.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Explicitly set the TF-M profile to not rely on the build system defaults
which might differ.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
We want to be able to run tests and get results in CI, not just build
for platforms we do not have access to.
Where possible, use a simulator instead of hw platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
zms is not something to be used with depends_on, it is a software
feature. looks like it was a copy/paste from an nvs test. This test was
always fitlered out and never built or ran on anything....
Use filter instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename this driver to eth_native_tap, including renaming all its
options.
The old options remain until v4.4, but as deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
- Allows to build and run ZMS tests on real platforms.
- Enables ZMS tests designed for a flash-simulator only when
built for qemu_x86 or native_sim targets.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Bugfix previous `osThreadJoin()` implementation where a thread which
exited with `osThreadExit()` could not be joined upon by other threads.
Signed-off-by: Utsav Munendra <utsavm@meta.com>
Tests an edge case in the RISC-V PSABI: In the medany and the medlow code
models, the compiler emits auipc/lui (U-type) and ld/sw (I-type/S-type)
instruction pairs for accessing a non-local symbol.
The U-type instruction sets the upper 20 bits, the I/S-type the lower 12.
The U-type and I-type/S-type instruction pairs are often adjacent in code.
This is also what the current llext architecture-specific relocations
expect.
However, this need not be the case - compilers can re-use the upper 20
bits set by the U-type instruction with multiple I/S-type instructions,
which is a useful optimization for multiple loads/stores of or within
the same symbol.
This commit adds a unit test for this behavior, which currently fails
for RISC-V.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So this overlay will not serve any purpose anymore.
Note native_sim did not have an overlay of its own.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
Remove the twister support for native_posix[//64] and therefore all
references to them from the testcases and samples yamls, so twister
does not error out.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add missing Copyright from derived files and fix the Copyright year for
some files to keep the original Copyright notice
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
This test has been seen failing at random (though not often).
A valgrind check showed the nvs_ate structures were being
CRC'ed with not-initialized data, and checked later (assuming
the CRC would be different than a constant).
This maybe have been the cause of the test failures, so let's
initialize the whole structure to prevent the CRC value
from depending on random memory/stack content.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Now that `SECURE_STORAGE` does not `select` dependencies, they need to
be enabled explicitly by the tests.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Filtering on something we set in the prj..conf does not do anything. We
have filter on platforms already.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
MMU is enabled via the arch specific MMU option and by the platform.
i.e. X86_MMU or ARM_MMU selects MMU.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a test that checks if disconnecting
and restarting the IPC session works correctly. The
test is also focused on the "unbound" callback.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
Co-authored-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
We need to make sure that within Zephyr different users of the PSA APIs
don't interfere with each other because of using the same numerical IDs
for persistent assets.
This takes care of the PSA key IDs when using persistent keys through
the PSA Crypto API.
See the comments in `<zephyr/psa/key_ids.h>` for more information.
This removes the recently-introduced Kconfig options that allowed changing
the base IDs subsystems were using for their persistent keys.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This patch adds a test suite for the inspection API. The test checks
that the symbols exported by the 'inspect_ext' extension are correctly
mapped inside their corresponding regions and sections.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This adds a on target performance test for Settings SS. Using this test
performance of the Setting SS + NVS/ZMS backend can be benchmarked.
The test repeatedly write 128 settings entries. Each setting entry
has a size of 4 bytes, and path length of 16 bytes (excluding the
null-terminator).
The test has two variants, with and without Bluetooth scan running.
This is useful to benchmark performance along with some component
of BT subsystem activated.
The test could be enhanced in future to include or create combinations
of different functionalities running, when agreesive store operations
are happening.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
The SoC State Change Power Domain driver issues TURN_ON/
TURN_OFF actions to all devices registered with it for
certain power states that can be specified via device tree.
This test exercises the functionality of this driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Prior to this change a wrap of the completion count (without SUBMIT_SEM)
would result in looping indefinitely waiting for completions.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add a test for the behaviour of `rtio_submit` with
`CONFIG_RTIO_SUBMIT_SEM=n` when the `cq_count` variable overflows.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Developer reports build error when he uses LOG_RAW in his code
and disables logging in prj.conf using CONFIG_LOG=n.
Add test case for above described scenario.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Include explicitly `logging/log_backend.h` header so that non POSIX
boards can build this test. For POSIX boards, this headers was indirectly
included through `ztest.h`->`ztest_assert.h`->`tc_util.h`->`log_ctrl.h`.
Fixes#85441
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Allow dynamic allocation of USB devices on connected event.
Add very basic USB device validation and configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fix test_flash_area_get_sectors test for platforms
with maximum number of sectors per image slot > 1024.
Increase the support value to 2048.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The previous behavior was to call `fs_sync` on the file after every log
item written. In many cases, log messages come in bursts, and `log_core`
already operates in batches, configurable using
`CONFIG_LOG_PROCESS_THREAD_SLEEP_MS` and
`CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD`. Once the batch is done, the
backends get notified with `LOG_BACKEND_EVT_PROCESS_THREAD_DONE` if any
logs were processed. This is a nice time to `fs_sync` the written changes.
This change both speeds up the time spent writing logs and reduces the
amount of block erases done on the flash, as the previous implementation
erased blocks after each individual log message.
Signed-off-by: Kamil Krzyzanowski <kamnxt@kamnxt.com>
Convert testing of the logging backend for file-system to include the
full implementation.
Need to disable logging and just include the unit under test to make
this simpler.
The API functions for the backend can then be called on the backend
object.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
The LLEXT test suites are quite large, and should not be built
for "small" SoCs. Filter the tests based on RAM and ROM/flash
size. The following test sizes built for nrf52840 where used
to determine min sizes:
Name: Flash: RAM:
llext.loader_build 105 80
llext.readonly 105 79
llext.readonly_mpu 140 95
llext.readonly_mmu 106 145
llext.writable 123 125
llext.writable_relocatable 117 129
llext.writable_slid_linking 108 125
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Enforces bitness match of ARC compilers and linkers invoked
building LLEXT apps by inheriting -mcpu flag from Zephyr.
The ARC toolchain becomes confused without the -mcpu flag.
On qemu_hs5x we see GCC select elf32-littlearc64 for
linking an object previously compiled as elf64-littlearc64.
Fixes#80949
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
In the usbd_register_all_classes(), we may need to skip some instances
as they may have very specific function like USB DFU "DFU mode" which
should not be available by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
