In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The close function on a TCP socket can return before the complete
socket has been closed, as there might be packets still in flight.
Add a wait at the end of the test so we are sure all sockets have
been closed before the next test starts.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The close function on a TCP socket can return before the complete
socket has been closed, as there might be packets still in flight.
Modify the test to wait briefly (less then the retransmit time), before
counting the number of still open net_contexts. This makes the test
outcome not dependent on the scheduling order of the different tasks.
Secondly the test actually checks the number of open contexts to be zero
so there is no need to wait for any open contexts to still close.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
When there is no response from the server, a client side connect
should return a ETIMEOUT. This tests breaks the connection and validates
this behavior.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
DAD timeout was wrongly checking the reply order. The code will always
assign sequentially the reply to 0-2 with the current uptime. This means
that we will always have dad[0] < dad[1] < dad[2]. Check it is useless.
Instead, let just check if we got all replies.
The test checking the time between the first and last request is to
fragile. It is testing a constant independently of the tested platform
failing in several of them. Just remove it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add unit tests for socket dispatcher module. The tests verify that:
* a socket is automatically dispatched to a regular socket on any
first socket call, if the socket was not bound already before
(according to the default priority rules)
* a socket is correctly dispatched to an offloaded/native socket
implementation after a SO_BINDTODEVICE call
* a socket is correctly dispatched to a native TLS socket, with an
underlying native/offloaded socket, if TLS_NATIVE and SO_BINDOTODEVICE
socket options are used
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A reproducible case to see what happens when the TCP stack runs out
of buffers. It transfers a block, bigger then the number of buffers
available.
Also test by introducing packet loss in the loopback driver.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Since the loopback driver makes use of the RX packet pool now, adjust
the packet count for the test.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The ARRAY_SIZE macro uses sizeof and thus the return
type should be an unsigned value. size_t is typically
the type used for sizeof and fits well for the
ARRAY_SIZE macro as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Even though bash is commonly available as /bin/bash there are
exceptions (e.g NixOS). This commit allow the use of the scripts in my
environment and is generic.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
In case an individual resource is being discovered, the LwM2M client
should not only fill the attributes assinged at the resource level, but
also the ones inherited from the object and object instance levels.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The device already has a DT compatible (and uses DT properties).
Instantiate the device using the DT-based macros and remove hardcoded
name.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Update test to ensure that any file can be tranfered,
not only files that are aligned with the packet size.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for the gateway object [EXPERIMENTAL] used by the
MG100, BT510, and BT610 LwM2M demo.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
In order to align with macros used to obtain a device reference (e.g.
DEVICE_DT_GET), align the PM macros to use "GET" instead of "REF". This
change should have low impact since no official release has gone out yet
with the "REF" macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This provides the infrastructure to create network packet filter rules
and to apply them to the RX and TX packet paths. Rules are made of
simple condition tests that can be linked together, creating a facility
similarly to the Linux iptables functionality.
A couple of generic and Ethernet-specific condition tests are also
provided.
Additional tests can be easily created on top of this.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Verify that Route Info data received in Router Advertisment creates a
route and correctly populates the net_route_entry structure.
Additionally, extend the MTU on the test interface, to accomodate the
extended Router Advertisement message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement a concept of Route Preference, as specified in RFC 4191. The
Zephyr host will prefer routes with higher preference, if they lead to
the same prefix through different neighbours.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Arduino compatible boards should have a working UART on pin 0 & 1.
On frdm_k64f this is handled by uart3
Unfortunately pinmuxing of uart3 was destroyed when enabling NETWORKING,
because the uart3 RX/TX pins was reconfigured for 1588 timers.
1588 timers are enabled by the enet child node, ptp which by some reason
is enabled by default.
1588 timers aren't needed in most cases when ethernet is being used,
so this fix ensures ptp is by default disabled. Likewise pinmuxing of
the 1588 timer functionality is now dependant of ptp being active
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Add some basic custom 802154 L2 tests, verifying that a custom L2 can be
integrated with Zephyr properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in packed icmpv6
structs, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr/in6_addr structures with raw buffers in
net_arp_hdr struct, to prevent compiler warnings about unaligned
access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Since drivers implement a callback based on action and not the state,
we should be using the API based on the action instead of the one based
on the state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
