Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Add overlay for the FRDM MCXN947 qspi variant
- Fix the overlay file name for the default variant
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The current driver contains assembly code which is specific for the nRF51
SOC which makes it incompatible with other SOC's. This patch adds support
for other nRF SOC's as well. The timing is calucated based on the CPU clock
frequency, but can be configured manually as well if needed.
Changes have been verified on a Adafruit Feather nRF52840 Express board,
which contains a single NeoPixel RGB LED. Timings have been verified using
a scope connected to the WS1812 data line.
Signed-off-by: Chaim Zax <chaim.zax@zaxx.pro>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Remove `SPI_NOR_IDLE_IN_DPD` to simplify the possible transition states
in the `spi_nor` driver. This option was originally added 5 years ago
when device runtime PM was in a much less mature state.
I do not believe having a separate power management implementation for
this one in-tree driver is in the interests of the project.
The behaviour of `SPI_NOR_IDLE_IN_DPD` leads to extremly suboptimal
behaviour in use cases where multiple small reads are performed
sequentially, see #69588.
Removal of this option does not break the behaviour of any existing
applications, only increases current consumption in idle by ~10uA until
device runtime PM is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The driver in tree is for u-blox M8 devices, not M10. The M10 series
devices (from Protocol Version 23.01) use a different, non backwards
compatible interface for configuring the modem behaviour.
Of the two boards tested in the original PR, the "VMU RT1170" is
explicitly listed as having a u-blox NEO-M8N modem, while I have
been unable to find any information online about the "FMURT6" board.
Leaving the naming as-is will cause problems when M10 drivers are
contributed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Exclude the nucleo_h755i_q m4 core from the flash_shell samples,
as the m4 core in stm32h7 parts does not have flash support in Zephyr.
Signed-off-by: Mike Banducci <michael.banducci@sandc.com>
Nrf54h20dk and nrf54l15 have UART Flow Control enabled
by default on all cores.
It's a source of problem when mbox sample is run in Twister.
Twister opens serial port only on host core,
thus nobody confirms reception of logs from remote core.
As a result, remote core stucks on printing boot banner.
Twister fails sample due to the timeout while waiting for messages
from remote to host.
Disable Flow Control on remote core when mbox sample is executed
on nrf54h20 or nrf54l15.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Add support for testing IPC between cpuapp<>cpuflpr. Some adjustments
have been done to be able to support two different remote targets for
the nrf54h20dk cpuapp.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
"Video subsystem for Zephyr" is actually only defined as a driver
and the examples actually include <zephyr/drivers/video.h>.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The commit fixes soc_flash_nrf sample documentation where incorrect
partition names has been used and removes information of
CONFIG_TRUSTED_EXECUTION_NONSECURE affecting which partition is used
as this is no longer true.
The printf message reporting start of sample has been modified
to print "Nordic nRF5 Flash Sample" instead of
"Nordic nRF5 Flash Testing", which is more accurate for code
residing in samples.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In the sample, print the jesd216_bfp_density is expressed
in bits. add the unit to avoid confusion with the Flash
density expressed in bytes (dw2 entry)
Page size is for programming expressed in bytes, meaning
program execution on bytes basis or here page basis.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that flash controller driver is supported on M4 of stm32h745i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample.
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Now that flash controller driver is supported on M4 of stm32h747i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
