Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim
And add native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
And switch native_posix overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
And switch native_posix overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable native_sim for this test.
Switch from native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable native_sim for these tests (platform_allow filter)
Switch from native_posix to native_sim as default test platform
And switch overlays from native_posix to native_sim
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
Switch overlays from native_posix to native_sim.
And move overlays into a boards/ directory
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When using picolibc before 1.8.5, the only way to get 'long long' support
was to use the full version, including floating point support. This is too
large for this testcase.
Reduce the size of the printf code by switching to the version without
64-bit integer support. This allows the test to pass when using older
picolibc versions, such as that included with SDK version 0.16.3.
Signed-off-by: Keith Packard <keithp@keithp.com>
The UART backend test suite performs 9 iterations of:
1. Open UART backend pipe
2. Transmit 8192 bytes of pseudo random data
3. Receive and validate bytes
4. close UART backend pipe
The test is run on real hardware, with the TX/RX pins
connected to each other to provide loopback functionality.
The test suite has been run on a STM32 and an nRF5340 board.
The test suite tests both the UART interrupt driven and
async APIs.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
On xtensa architectures the string "ZEPHYR FATAL ERROR"
comes after the coredump itself. The ordered regex will
incorrectly fail for this arch.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
The test should work on any boards with UART console, so
increase the test coverage by adding `CONFIG_UART_CONSOLE`
filter and using `qemu_x86` as `integration_platforms` instead
of `platform_allow`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
The debug.coredump.backends.logging testcase did use 'console'
Twister harness whereas the test suite itself and the rest of
the testcases are implemented as Ztest. This misalignment
allowed to check basic output expected from the logging backend,
but caused inconsistency of the test suite results because
the 'console' Twister Harness can't use test cases' ID provided
by the 'Ztest' Twister Handler.
It is decided to focus the debug.coredump.backends.* suite
on the coredump backend API testing with Ztest.
The logging backend's resulting output should be tested
by its dedicated test suite debug.coredump.logging_backend
(tests/subsys/debug/coredump).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extend coredump_backend tests:
* fix COREDUMP_CMD_VERIFY_STORED_DUMP test was not executed.
* add tests for these coredump commands:
- COREDUMP_QUERY_GET_STORED_DUMP_SIZE,
- COREDUMP_CMD_INVALIDATE_STORED_DUMP,
- COREDUMP_CMD_ERASE_STORED_DUMP,
- COREDUMP_CMD_CLEAR_ERROR.
* extend the out-of-the-treee example 'empty' backend to
execute the new tests.
* fix the test's cmake project name.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Set the backend's context to its control block's context
instead of NULL when doing `log_backend_enable`, as the log
backend UART uses that later.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add test to verify SDIO subsystem. Note that due to the nature of SDIO
cards, this test only reads from common registers and does not verify
extended reads or writes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Userspace test was using native_posix which does not support
userspace. Change to qemu_x86.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Added some new APIs to get the backend instances more easily,
so that dev does not need to rely on `shell_backend_*_get_ptr`,
which looks more like a hack to access a local variable.
These APIs are basically copied from the log backend
implementation.
Added testcase for the APIs.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF where needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Two substests cannot be run in the posix architecture
as they require userspace.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These tests cannot be run in this architecture as it does not
support coredump.
Today it is filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a testcase to run the same test application and GDB script
which we use for Zephyr GDB stub testing, but now with
the GDB stub enabled at QEMU itself using it as a reference
RDP backend implementation. This allows to check the Zephyr's
gdbstub implementation has similar behavior as the reference.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add `gdb_target_remote` test parameter for GDB `target remote`
command instead of its hardcoded value to allow different types
of gdbstub serial interfaces as well as different TCP ports in
gdbstub test suites possibly run in parallel on the same host.
Move all GDB log configuration parameters from GDB script to
the fixture code.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Gdbstub test improvements: using pytest fixtures, parametrization, and
expected pattern matching on outputs from GDB and the test application.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Clone samples/subsys/debug/gdbstub to tests and convert it back
to a build-only sample aligned with documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
This change slightly simplifies the configuration of a CSL receiver and
generalized CSL_RX_TIME to EXPECTED_RX_TIME as a re-usable primitive
across several timing-sensitive IEEE 802.15.4 standard sub-protocols
(namely BE-PANs/DSME/CSL/RIT/TSCH).
This API change is based on the rules outlined in RFC #61227.
Fixes: #62918
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
When relocating section symbol addresses the value where the
relocation is to be written is an offset into the section to load.
Simply rewriting it with the section address is not enough, we need
to write the address of the section with the offset into it.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This commit increases the buffer used for commands
in the control channel within an instance of the
modem_cmux module. The buffer was not large enough to
store an MSC command if the optional break signals
where included. This commit fixes the issue and
updates the test suite to use the max size MSC message.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Better group for logging tests removing verbosity and redundancy in
identifiers and making the sub-component a bit more uniform and clear.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
