Disable the quadspi mpu region of the nucleo_f746zg
when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
These samples & tests cannot be run in this architecture
as it does not support userspace.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Excluded cy8cproto_062_4343w and cy8cproto_063_ble from
samples/userspace/shared_mem sample due to a hardware
limitation with number of available MPU regions.
Sample throws warning:
`num_parts of 4 exceeds maximum allowable partitions (2)`
With the Cortex M4 on the boards only 2 mpu regions are left
and available to be used with the sample.
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When a memory domain is initialized, the z_libc_partition must be
included so that critical libc-related data can be accessed.
On ARM processors without TPIDRURO when THREAD_LOCAL_STORAGE is enabled,
this includes the TLS base pointer, which is used for several
thread-local variables in the kernel.
Signed-off-by: Keith Packard <keithp@keithp.com>
When active, z_libc_partition consumes an MPU region which leaves too
few for some MPU tests. Free up one by disabling HW stack protection.
Signed-off-by: Keith Packard <keithp@keithp.com>
This changes both k_mem_domain_add_partition() and
k_mem_domain_remove_partition() to return errors instead of
asserting when errors are encountered. This gives the application
chance to recover.
The arch_mem_domain_parition_add()/_remove() will be modified
later together with all the other arch_mem_domain_*() changes
since the architecture code for partition addition and removal
functions usually cannot be separately changed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes k_mem_domain_init() to return error values
instead of asserting when errors are encountered.
This gives applications a chance to recover if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
re-enabling this test was premature, it still crashes very often
due to two known issues affecting x86 64-bit. Filter out for
every 64-bit x86 platform until those bugs are solved, which
will reduce CI failure noise.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Saves quite a bit of memory on MMU-based systems which manage
page tables at the memory domain level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This test uses bare variables to synchronize state between threads,
but had forgotten volatile qualifiers on all the data. So the
compiler was free to reorder and make assumptions that aren't valid
when the values are being written from other CPUs.
Single-cpu operation was fine because the code would always hit an
external function call like k_sleep() that would force it to re-read
from memory every time there was a context switch (timeslicing isn't
enabled on this test and the threads are cooperative), but on SMP the
volatiles can change at any time and we could see spurious state
mixups and hangs.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This sample keeps failing in CI due to some SMP issues currently being
addressed. Exclude until we have a fix.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable CONFIG_TEST so that we get the necessary defines for
console output when a fatal error happens, as well as assertion
checking.
Remove an unnecessary self-abort in main(), this causes an
assert to fail. Letting main() return does the same thing, more
gracefully.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There was some unlocked initialization code in the "enc" thread that
would race with the "pt" and "ct" threads if another CPU was available
to run them (it was safe on UP because "enc" entered the queue first
and was cooperative, the others wouldn't run until it blocked).
Move it to main() and remove the enc_state guard variable which is no
longer doing anything.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
found some references to files (via :zephyr_file: and :zephyr-app:) that
were moved, so the links were broken
Fixes: #19660
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Several user mode tests cannot run on twr_ke18f because
either the platform does not have a sufficient number of
MPU regions required for the tests, or, the tests also
require HW stack protection (which has been, by default,
excluded in user mode tests for twr_ke18f board). We
excluded the board from all those tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
While trying out the hello_world sample built for QEMU, I was expecting
the sample app to exit and I'd return to a command prompt. Nope. You
need to exit QEMU manually, so add that step to the sample instructions.
Looking around, there are more uses of QEMU like this that could use
this added step after running the sample app.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are no longer per-partition initialization functions.
Instead, we iterate over all of them at boot to set up the
derived k_mem_partitions properly.
Some ARC-specific hacks that should never have been applied
have been removed from the userspace test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The public APIs for application shared memory are now
properly documented and conform to zephyr naming
conventions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
