Attempts to reimplement the existing work API using a new work
implementation failed, primarily due to heavy use of whitebox testing
in validating the original API. Add a temporary Kconfig that will
select between the two implementations so we can use the same
identifiers but select which implementation they reference.
This commit just adds the selection infrastructure and uses it to
conditionalize the existing implementation in anticipation of the new
one in the next commit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The work poll API is defined in terms of the k_work API. Shift a
structure definition around so it's not within the details of a
specific k_work API implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This lets an application detect when a PPP connection fails to establish
or terminates, so that the connection can be reattempted (for example,
by setting carrier off and on).
Signed-off-by: Jim Paris <jim@jim.sh>
Document the GATT APIs not waiting for TX context when being called
from the system workqueue context. This is because the TX contexts
are freed by the system workqueue so blocking would cause a deadlock.
The number of TX contexts are by default equal to the number of
TX buffers in the system. Since TX contexts is allocated after a buffer,
but freed from a lower priority than the buffer then there can be more
allocated TX contexts than TX buffers.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the incorrect documentation note about the indication callback
being called from the system workqueue.
The callback will be called by the RX thread once the confirm indication
response has been received.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove unused symbols and related sections from the linker script. In
particular CONFIG_IS_BOOTLOADER and CONFIG_CODE_DATA_RELOCATION are not
currently supported on AArch64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The compiler was inserting additional redundant loads in many
`sys_dlist_*` APIs, in case writes aliased with previous reads.
However, these additional reads are unnecessary, as the only cases
where the aliasing would matter would be a violation of the `dlist`
API contract (e.g. if node->next == node but node->prev != node).
This is decidedly a micro-optimization.
Signed-off-by: James Harris <james.harris@intel.com>
The funky order was necessary when registers were stored using a
sequence of `stp x(n), x(n+1), [sp, #-16]!`. Now that absolute offsets
are being used, we can restore natural ordering.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This introduces the support for CRC32C (Castagnoli) algorithm.
The generator polynomial used is 0x1EDC6F41UL.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This functionality is is enabled by setting CONFIG_SHELL_GETOPT.
It is not active by default.
User can call following functions inside command handlers:
- shell_getopt - getopt function based on freebsd implementation
- shell_getopt_status_get - returns getopt status
Beware when getopt functionality is enabled shell will not parse
command handler to look for "-h" or "--help" options and print
help message automatically.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The most common secure monitor firmware in the ARM world is TF-A. The
current release allows up to 8 64-bit values to be returned from a
SMC64 call from AArch64 state.
Extend the number of possible return values from 4 to 8.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Instead of relying on hardcoded offset in the assembly code, introduce
the offset macros to make the code more clear.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Removed printk.h include from log_core.h.
Since LOG_PRINTK cannot be enabled with LOG_MINIMAL removed
support for both.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We default to use the "label" properties of a devicetree node as the
name if it exists. If the "label" does not exist we than use the
node-name@unit-address for the node as the name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
usb_hid_descriptor struct is only used internally and
is not intended to be used by the USB HID device application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add common HID definitions header and move common macros
from USB HID header to common HID header.
The header can thus be used by Bluetooth HID profile or
others independently of USB subsystem.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The MT_OVERWRITE case is much more common. Redefine that flag as
MT_NO_OVERWRITE instead for those fewer cases where it is needed.
One such case is platform provided mappings. Apply them after the
common kernel mappings and use the MT_NO_OVERWRITE on them.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There is no real reason for keeping page tables into separate pools.
Make it global which allows for more efficient memory usage and
simplifies the code.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce a remove_map() to ... remove a mapping.
Add a use count to the page table pool so pages can be dynamically
allocated, deallocated and reused.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Recursive macros are more generic but they are very depending for
preprocessor. When they are used extensively they can prolong
compilation even ten times. Replaced them with brute force
implementation for:
- FOR_EACH macros
- GET_N_ARG
- GET_ARGS_LESS_N
- UTIL_LISTIFY
- UTIL_REPEAT
New implementation provides same functionality but it is limited to 64
input arguments. This is not a hard limitation and can be increased
in the future.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a callback to notify applications when the datarate has changed.
This allows applications to know when payload sizes have changed without
needing to call `lorawan_get_payload_sizes` before each transmission.
This also enables:
* Monitoring of network conditions on the device
* Determining if a network connection has been lost
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a function to query the minimum possible datarate on the network.
This value may change over the lifetime of the connection as a result
of commands from the network server.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add the ability for applications to query the maximum size of packets
that can be sent. This must be dynamically queried as the sizes change
with datarate, region, and as MAC commands are added by the stack.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Allow NULL pointer to be passed to bt_id_get function so
that only count can be fetched.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This macro returns a node's name with unit-adddress, given its node
identifier.
The node name is useful information for the user to utilize for debug
information, similar to DT_NODE_PATH, or DT_LABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit de84575e2e.
Its merge broke the USB audio sample, which is failing CI in unrelated
PRs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a newer, much smaller and simpler implementation of abort and
join. No need to involve the idle thread. No need for a special code
path for self-abort. Joining a thread and waiting for an aborting one
to terminate elsewhere share an implementation. All work in both
calls happens under a single locked path with no unexpected
synchronization points.
This fixes a bug with the current implementation where the action of
z_sched_single_abort() was nonatomic, releasing the lock internally at
a point where the thread to be aborted could self-abort and confuse
the state such that it failed to abort at all.
Note that the arm32 and native_posix architectures, which have their
own thread abort implementations, now see a much simplified
"z_thread_abort()" internal API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
THIS COMMIT DELIBERATELY BREAKS BISECTABILITY FOR EASE OF REVIEW.
SKIP IF YOU LAND HERE.
Remove the existing implementatoin of k_thread_abort(),
k_thread_join(), and the attendant facilities in the thread subsystem
and idle thread that support them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
ARC mpu version used a wrong number 3, could cause conflict in future.
This commit fix this issue to version number 4.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
This returns the available contingous space in the packet starting from
the current cursor position.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Don't auto-update the device name in the advertising data as that
would clear any other scan-response data set by the application.
Document the behavior of the advertise with device name option
and the need to update data by the application to make sure
advertising data does not get cleared.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix endianness issue in reading CPF descriptor not converting from
native endianess to little-endian on the 'unit' and 'description'
fields.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Various samples are using the DT_INST macros to get devicetree node
identifiers, and going from there in the usual way to get a struct
device*.
This is undesirable for preparing a simple sample application:
1. The devicetree instance number space's rules are both complicated
and irrelevant outside of device drivers. Using this number space
just to get a node identifier is distracting and confusing in this
context.
2. A basic "get the device and use the API" sample doesn't care about
the *devicetree node identifier*; it really just wants a *device*.
Introducing node identifiers at all is also kind of beside the
point.
The only good reason to use DT_INST macros is that they guarantee that
instance number 0 refers to an enabled node with a given compatible,
as long as there is at least one. But the extra complexity isn't
really worth the benefit.
Add a new DEVICE_DT_GET_ANY(compat) macro that solves both of these
problems, by returning an arbitrary device structure straight from a
compatible. This uses INST numbers behind the scenes, but that's now
an implementation detail.
This avoids introducing INST numbers or node identifiers where they
are not needed, without requiring warts like sample-specific aliases
that point at the right devicetree node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add helper macros for initializing a struct spi_sconfig for a SPI
device which is defined in the devicetree. They are available from C
only due to C++ compatibility issues.
For some fields, like 'frequency', we just get the value from the
standard devicetree property. For others, like the spi_cs_control
structure's 'gpio_dev', we rely on the new DEVICE_DT_GET() macro.
This patch does not change anything for controlling SPI devices that
aren't set up in devicetree. It is entirely a convenience for driver
and application code that relies on DT.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add two new macros for getting the chip select GPIO controller from a
SPI device:
- DT_SPI_DEV_CS_GPIOS_CTLR()
- DT_INST_SPI_DEV_CS_GPIOS_CTLR()
Now that we can get struct device pointers at build time directly from
a devicetree node identifier, it's useful to be able to get a
node_id for a CS GPIO controller from the SPI device, because that's
necessary for setting up the gpio_dev in a struct spi_cs_control.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Reimplement DT_PHANDLE_BY_IDX() in a way that defers concatenating its
parameters together until after all of them have been expanded, for
reasons that will be taken advantage of in the next patch.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This returns the node identifier for a node's bus. For example, for a
device on an I2C bus, it would return a node identifier for the I2C
bus controller.
We already have a DT_BUS() and DT_INST_BUS_LABEL(), but there hasn't
been a request or need for DT_INST_BUS() up until now, so it didn't
exist yet.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Recursive macros are more generic but they are very depending for
preprocessor. When they are used extensively they can prolong
compilation even ten times. Replaced them with brute force
implementation for:
- FOR_EACH macros
- GET_N_ARG
- GET_ARGS_LESS_N
- UTIL_LISTIFY
- UTIL_REPEAT
New implementation provides same functionality but it is limited to 64
input arguments. This is not a hard limitation and can be increased
in the future.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added helper macros to obtain the pwm-controller node identifier
from a pwms phandle.
Signed-off-by: Alexander Wachter <alexander.wachter@leica-geosystems.com>
