Add no-timers configuration to sample.minimal to check that
it's actually working in runtime.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This board has a single instance of EMAC connected to a NXP TJA1103
Ethernet PHY. Currently, there is no driver for this PHY and its
pin strapping configuration allows to use it without software
configuration, so EMAC is configured as fixed link.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow socket-loop to wake up immediately, if there are changes,
instead of waiting for zsock_poll() to timeout.
This change makes engine more reactive and removes
hard coded timeout from zsock_poll().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add new sample scenario without using a hardware watchdog as fallback.
This is used for the moment only for the mr_canhubk3 board, but a
generic configuration is introduced that can be used by other boards if
needed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This watchdog doesn't allow to stop on CPU halt by debugger.
It also requires a minimum window value different than zero
so that the watchdog is refreshed during the open window.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
This also reduces the number of default channels supported
to 1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the overlay for running the samples/subsys/nvs/ application
on the nucleo_g474re. Define a 6kB storage_partition at the end of the
512kB flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Enable all channels that available connector on board.
ADC0 channel 6 on precision group with normal end chain
callback.
ADC1 channel 2 on precision group with normal end of
conversion callback.
ADC2 channels 3, 4, 5 on precision group with normal end
of conversion callback.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
The IEEE 802.15.4 API and networking subsystem were using several
inconsistent timestamp resolutions and types. This change defines all
timestamps with nanosecond resolution and reduces the number of
available types to represent timestamps to two:
* `struct net_ptp_time` for PTP timestamps
* `net_time_t` for all other high resolution timestamps
All timestamps (including PTP timestamps) are now referred to a
"virtual" local network subsystem clock source based on the well-defined
types above. It is the responsibility of network subsystem L2/driver
implementations (notably Ethernet and IEEE 802.15.4 L2 stacks) to ensure
consistency of all timestamps and radio timer values exposed by the
driver API to such a network subsystem uptime reference clock
independent of internal implementation details.
The "virtual" network clock source may be implemented based on arbitrary
hardware peripherals (e.g. a coarse low power RTC counter during sleep
time plus a high resolution/high precision radio timer while receiving
or sending). Such implementation details must be hidden from API
clients, as if the driver used a single high resolution clock source
instead.
For IEEE 802.15.4, whenever timestamps refer to packet send or receive
times, they are measured when the end of the IEEE 802.15.4 SFD (message
timestamp point) is present at the local antenna (reference plane).
Due to its limited range of ~290 years, net_time_t timestamps (and
therefore net_pkt timestamps and times) must not be used to represent
absolute points in time referred to an external epoch independent of
system uptime (e.g. UTC, TAI, PTP, NTP, ...).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
add one Ethernet twister test for nucleo_h563zi,
nucleo_h743zi, nucleo_f429zi, nucleo_f746zg.
remove the common: harnesses: net that are not supported
leave harnesses: net for all other test execpt the one we use
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Adds driver for pwm on xmc4xxx using Capture Compare Unit 8 (CCU8)
module. There are two CCU8 nodes with each one having four slices.
Each slice has two output channels.
Unlike CCU4, this module can generate complementary high-side/low-side
signals for each output channel. A variable dead time can be added
during the off to on transitions to make sure that the
high-side/low-side signals are not on at the same time.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Adds driver for pwm on xmc4xxx using Capture Compare Unit 4 (CCU4)
module. There are four CCU4 with each one having four channels
Thus it's possible to have up to 16 pwm output signals. The output of
each channel can only be connected to a specific port/pin. The possible
connection and gpio configurations are defined using pinctrl.
The CCU4 module also has a capture mode. Capture support will be added
in the future.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
The malloc arena/heap size setting can be adjusted using different
Kconfig options, depending on the libc implementation. This means
prj.conf can't be used to set this value on projects that can be built
for multiple libcs without generating a Kconfig warning.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This is no longer necessary, as this option is selected as a dependency
for class implementations where it is required.
Also remove redundant test cases.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add the dts and config overlay for nxp_adsp_imx8m board
in order to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX 8M Plus.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add initial version of Infineon CAT1 counter driver
Add initial version of binding file for Infineon
Add counters to psco6 dtsi
Add external trigger pin that runs counter
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
The intent of this change is to add custom shell configurations for
intel_socfpga_agilex* based boards. As of now, configurations are
added for 'intel_socfpga_agilex5_socdk' board.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
There is some ambiguity with the DHCPv4 handling in the dns_resolve
sample. On one hand, the sample uses net_config library, which does
initiate the DHCPv4 on the interface (if enabled) and may block the
initialization until the address is assigned (in case there is no other
statically assigned IPv4 addresses.) On the other hand, the sample
registers for NET_EVENT_IPV4_ADDR_ADD in case DHCPv4 is in use, delaying
the DNS queries until address is assigned.
In case net_config delayed the initialization however, this will not
work, as the event handler will be registered only after DHCPv4 address
is assigned, so the callback will not get executed.
Fix this, by checking if DHCPv4 assigned address already exists on an
interface - if so, schedule DNS queries immediately. Otherwise (for
example in case when net_config was not configured to wait for address)
register an event callback, and schedule queries from there.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enable PXP rotation for LVGL sample. The PXP is configured to
rotate by 0 degrees, so the original image is left untouched.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable PXP engine with RT1170 EVK. The PXP is set to rotate by 0
degrees in the LVGL sample, for testing purposes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- Add overlay for the esp32s2_saola board to die_temp_polling sample.
- Add aliases for the die_temp_polling sample to esp32s2 dtsi.
Signed-off-by: Hiroki Tada <tada.hiroki@fujitsu.com>
Add sample to demonstrate usage of IS31FL3733 LED using the LED API.
This led matrix controller has several custom APIs to expose
functionality not available within the standard led API, such as
limiting LED current.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
To demonstrate how to configure Zephyr to use the IPM
driver over the IVSHMEM subsystem. Since this driver
is intended to generate inter QEMU VM notifications
it was better to create a sample app using the shell
for quick demonstration for the users.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Some tests provide their own PM hooks, adapted for testing purposes. Add
a new option to select HAS_PM, so that CONFIG_PM can be enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
That's the type of the original argument and we should use it internally as
well to prevent truncating the value.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Add two TMAP broadcast sample applications.
tmap_bms implements the Broadcast Media Sender role. It uses CAP
Initiator broadcast APIs to broadcast an audio stream.
tmap_bmr implements the Broadcast Media Receiver role. It scans and
syncs to the PA having filtered the EA by the presence of TMAP role
information. It also instantiates the VCP.
Signed-off-by: Silviu Petria <silviu.petria@nxp.com>
If the default which is set to CONFIG_BOARD is used, then the lwm2m
client fails to set the client identity as the default maximum length
allowed is only 16 and for some boards this exceeds.
So, increase the default length to accomodate almost all boards. Also
add a build assert for the length validation.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In case UDP is disabled, init_udp() is not compiled and the build
fails. Fix this, by providing dummy implementations for UDP functions,
in case UDP is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
