Takes the modem state machine by calling lcp_close instead of lcp_down
Using this method the LCP layer sends a TERMINATE_REQ to the modem and the
network interface is only taken down when the LCP layer has properly
finished.
Moved the ppp_mgmt_raise_carrier_off_event and net_if_carrier_down
to lcp.c to avoid breaking the interface.
Tested on a real modem.
Fixes: zephyrproject-rtos#41627
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit adds OPENTHREAD_PLATFORM_CSL_UNCERToption to Kconfig.
This option will allow user to configure openthreads CSL clock
uncertianity during build time.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When support for custom MRU/MTU was added with
CONFIG_NET_L2_PPP_OPTION_MRU=y, code flow with
CONFIG_NET_L2_PPP_OPTION_MRU=n has been broken due to lack of valid
'ctx->lcp.my_options.mru' initialization and its use (with value 0) in
the implementation.
Initialize 'ctx->lcp.my_options.mru' unconditionally in lcp_init(), so
that PPP works fine with CONFIG_NET_L2_PPP_OPTION_MRU=n.
Fixes: 8a51a79d89 ("net: l2: ppp: possibility to have a custom
MRU/MTU")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit adds an option to store OpenThread settings in RAM for the
case where the flash driver is not available. This can be useful
for testing openthread on new platforms which are still under
development.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The comment before this change was misleading, as those functions
(and other ones used from the level of user space application) require
DSA interface (like lan{012}), not the master one (like eth0).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The address of DSA API functions' structure available for usage from
the level of user's application (like for example in
samples/net/dsa/src) is stored in dsa context, not per DSA interface
device.
The struct dsa_context is defined once for all DSA (i.e. not master)
interfaces.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
`struct ieee802154_mpdu` access generates warnings related to unaligned
access to packed structure member. The structure itself however does not
need to be packed, since it is not mapped directly into the frame
buffer, but rather contains pointers to the structures representing
corresponding header regions in the frame. Those structures are
correctly defined as packed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr/in6_addr structures with raw buffers in
net_arp_hdr struct, to prevent compiler warnings about unaligned
access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace the statically defined net_buf with the standard mechanism of
allocating the buffer from a pool. This introduces a minor memory
overhead, but has the benefit of ensuring that standard net_buf calls
will work correctly.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Define a custom IEEE802154 based L2. The user can then use those symbols
to implement their own 802.15.4 based L2, based on those symbols, w/o a
need to modify the Zephyr tree.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce a common config for all 802.15.4 based L2 implementations.
This way, any custom 15.4 L2 implementation will be able to
automatically enable use 15.4 driver, w/o a need to modify the actual
Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`net_eth_vlan_enable()` allowed to use illegal vlan tag values, fix this
by disallowing any tag value higher or equal to 0xfff (which is a limit
for the tag and a reserved value).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Reading a set MTU from the used net_if when starting LCP.
This enables also other custom MTU/MRU to be set for the link than
the default CONFIG_NET_PPP_MTU_MRU (set by a ppp driver during
initialization).
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
There was a problem with source address selection for ARP
retransmissions, when an ARP entry was already pending. In such case,
the `entry` value passed to `arp_prepare()` is NULL, which in result
caused the `current_ip` variable being used as the source value. The
problem with this approach is, that the `current_ip` is only set in
IPv4 autoconf, the Ethernet L2 does not set this variable. In result,
every retransmission of an ARP packet was sent with unspecified source
address, preventing the response from being handled.
Fix this by partially restoring the behaviour of the ARP source address
assignment from before IPv4 autoconf was introduced. If the ARP is sent
by the IPv4 autoconf, use the `current_ip` value provided. If entry is
not set, use the source IPv4 address set in the actual data packet.
Otherwise, search for a source address on the interface corresponding to
the `entry`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- Add a `log_strdup` to the role text output for logging V1
compatibility
- Fix style issues
- Change where the documentation refers to an OpenThread device as
"himself" to "itself"
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
If CONFIG_NET_LOG=y is set, OpenThread will output the current OT
role whenever the state changes.
To simplify understanding of the log output, this change replaces
the numerical role ID with the text name of the role. This also
required a change to a documentation file to replace an instance
of a numerical ID.
NOTE: This is potentially a breaking change should anyone be using
test scripts that monitor the OpenThread state changes and look
for the numerical ID. This does not seem to be the case for the
Zephyr tests, however.
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/net and drivers/ethernet/Kconfig.e1000 settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
The following settings has EXPERIMENTAL removed as they are considered
mature:
- NET_OFFLOAD
- NET_PROMISCUOUS_MODE
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/canbus, subsys/net/l2/canbus, and drivers/can settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
OpenThread has lately got an option to provide a custom
crypto backend that replaces the default, based on mbedTLS
API. Implement a backend based on ARM PSA crypto API that
is better suited for applications willing to take advantage
of the ARM trust zone technology.
Add Kconfig option: OPENTHREAD_CRYPTO_PSA_ENABLE which
enables that backend.
Also, another Kconfig option:
OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE, implied by the
former, which enables usage of key references instead of
literal keys in OpenThread. It will eventually allow
OpenThread applications to keep sensitive data such as
encryption keys in the secure storage, accessible from the
secure world only.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Fixes#38994, ARP messages were being sent to IPvXmcast MAC addresses
rather than the expected source MAC address or the broadcast address.
Signed-off-by: Robert Melchers <rmelch@hotmail.com>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Refactor IPv4 multicast address to MAC multicast address conversion
into its own function, so it can be reused by drivers as it is already
possible for IPv6 multicast addresses.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
BT_SECURITY_LOW and etc. were previously renamed and are no longer
valid.
The original rename is in the following commits:
1c48757d94 (New names, deprecate old)
5f2a9ba8e4 (Remove deprecated names)
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemiconductor.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Checks PAN ID for matching self address / broadcast, then the short /
extended address based on the used address mode.
Only when IEEE802154_HW_FILTER is not advertised by driver.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Note that the include to subsys has been moved from
under the drivers into subsys, as it is actually
the subsystem's job to make sure the include
directories are correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change DSA API to use `net_if` directly to make API calls instead of
indirectly via `dsa_context` and `switch_id`.
Remove unused `switch_id`, `switch_enable_port`, and `dsa_get_context`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This provides a command line interface to query and modify
bridge instances, similar to Linux's brctl utility.
It can be used to inspect an application's bridge usage,
or manage a bridge of its own in a generic way.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This adds the ability to create Ethernet bridges for connecting
separate Ethernet segments together to appear as a single
Ethernet network.
This mimics the Linux functionality of the same name.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The openthread has enhanced features for periodic parent search,
this commit adds kconfig options to enable and configure these.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
6lowpan module can swap the original buffer with a newly allocated one
during decompression in case the decompressed header would not fit into
the original buffer. Therefore, storing the LL address offset and
restoring the pointer after decompression as it is done today is not
correct, as the new packet with decompressed IPv6 header will not
contain the LL header.
As the 6lowpan module doesn't deallocate the original buffer and
doesn't overwrite the LL header, its fine to use the original
pointers as they are.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Regular OpenThread upmerge to bring in a fix for a possible
infinite loop and support for DNS service subtypes.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Direct openthread API usage requires explicit locking,
which is also used internally.
Exposing a work queue through the openthread context allows
work to be submitted without the need to block other threads.
In particular with CONFIG_OPENTHREAD_MANUAL_START, application
logic can offload work which otherwise would need to wait for
the lock to become available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
