The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enabled Network shell and Ethernet L2 interface
with XGMAC driver in CLI application
Enabled MDIO shelll with dwcxgmac mdio driver.
Enabled TCP and UDP over IPV4.
Added intel_socfpga socdk support for echo_client and
echo_server sample applications.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Add a sample that presents how the custom nrf2_clock_control API
introduced for nRF54H20 can be used for the various clocks which
are supported by it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The TBS client callbacks are just informative so we
provide the information to multiple listeners.
To support this for the long strings, the function
handle_string_long_read was refactored.
This also allows for multiple users of the TBS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Modify USBD_DEFINE_MSC_LUN() to take in separate id by which the LUNs
are sorted. Previously the disk name itself was implicitly used as a
sorting key. This is a breaking change to Experimental API.
Another advantage of splitting the sorting id from disk name is the
ability to use KConfig symbols as disk name. Currently the MMC disk
driver uses KConfig symbol CONFIG_MMC_VOLUME_NAME.
Mark LUN definitions as static const because the LUNs are ending up in
ITERABLE_SECTION_ROM().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
[Reproduce issue]
1. Connect In-STA to Ex-AP
wifi connect WiFi_STA_HE_1.1.8 1234567890 3 2 2
2. Start APUT with ACS using below commands
wifi ap enable nxp-AP 161 1234567890 3
3. Connect Ex-STA to APUT and verify association using ping traffic
4. Now start two TCP server
zperf tcp download -I ml 5001 192.168.0.252
zperf tcp download -I up 6002 192.168.10.1
Observed behavior:
=============
Second TCP server fails to start
[Analysis]
1. After starting uap and a tcp server,
there is only one allocatable fd resource
left in the fdtable.
2. When two TCP clients try to establish a connection
with the server at the same time, the second client
cannot be assigned an fd, resulting in a failure.
[Fix]
Increase the maximum number of open file descriptors.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Problem:
on cyw208xx devices i see sometime `Timed out while synchronizing`
error in samples periodical_adv_rps/periodical_sync_rps.
log:
<err> bt_scan: Could not lookup connection handle from PAST
<err> bt_scan: Unknown handle 0x0000 for periodic advertising report
Timed out while synchronizing
...
After investigation i can confirm, the sync was created successful,
but in application (periodical_sync_rsp) terminated the sync when the
connection is not valid.
periodical_adv_rps doesn't have any mechanism to wait for sync and after
gatt write (subevent, response_slot information) it immediately
performs disconnection.
Solution:
Added sync wait delay before make disconnection, to ensure sync
is established before disconnection.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Remove print "Failed to receive response...", if receive
BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_RX_FAILED.
Problem: with cyw920829m2evk_02 device periodic_adv_rsp returns
multiple messages “Failed to receive response….” in the terminal
log.
This happens because controller generates
HCI LE Periodic Advertising Response Report event for each
RspSlot. Because no RSP_DATA is observed in the OTA, which
is no scan device to transmit RSP_DATA, no RSP_DATA can be
received. Therefore, Data Status is 0xFF in all of these events,
which finally cause the messages “Failed to receive response….”
Data_Status = 0xFF is expected because nothing is received
for that Rsp Slot.
Per spec, it’s not mandatory to generate these events,
So another vendors (e.g. Nordic) might skip the HCI event
generation if Data_Status = 0xFF.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Stores a magic value togetter with the counter value, and resets the
counter in case that magic does not match.
A small magic value is not ideal, but should be good enough for the
sample and avoids pulling in a additional dependency e.g. on crc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Also fixed a couple invalid or missing table of contents to have
proper document hierarchy.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The samples had a _iso suffix, but the other ISO samples
prefix iso_.
Renames the central and peripheral sample so that they
prefix iso_ rather than suffix _iso.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With commit ad242b9, the buffer size was made configurable. Hence, the
corresponding definition CONFIG_SAMPLE_BUFFER_SIZE has to be used when
filling and displaying the buffer.
Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
This commit changes the default value of CONFIG_HELLO_WORLD_MODE to 'y'
so that the hello_world function is compiled as a built-in part of the
Zephyr image by default. This is the simplest possible configuration,
that works for all architectures.
To build hello_world as an llext module, the user must either follow the
commands in the documentation or set CONFIG_HELLO_WORLD_MODE=m in the
project file along with additional architecture-specific settings that
may be required for proper LLEXT support on the target.
Leave a note in the prj.conf and sample.yaml files to remind the user.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The unicast server now prints when a steam enters the streaming
state.
This commit also slightly increases the metadata size to increase
interoperability with other devices such as Android.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
1) After the wifi driver successfully connects to the AP,
the dormant state should be set to OFF.
Once a deauth/disassoc frame is received or link lost occurs,
the dormant state should be set to ON.
2) Enable CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO and CONFIG_NET_CONTEXT_PRIORITY
to push high priority packets directly to network driver.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
IPPROTO_IPV6 option was set on TCP socket (besides doing it already in
tcp.c) instead of UDP. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
