If two IPv6 addresses have the same solicited-node multicast address
because they derive from the same EUI-64 interface identifier, make sure
that the solicited-node multicast address is not removed when one of the
IPV6 address is removed but only when both addresses are removed.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The value of in6addr_mcast is overwritten in iface_setup() before being
assigned to the interface. Remove the useless initial value since it is
never used, in order to avoid misleading information.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
PTS l2cap tests need BT_BUF_ACL_RX_SIZE to be 100.
Signed-off-by: Lang Xie <Lang.Xie@nordicsemi.no>
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Lwm2m firmware object have defined a write of zero length
string as a cancel operation.
So allow lwm2m_set_opaque(path, NULL, 0);
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The bt_bap_scan_delegator_find_state did not properly return the
correct receive state due to confusing return value of the
iterator function.
Modify it to use a simple bool.
This fixes all issues with "Failed to find receive state for sink"
when using the Broadcast Sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some values have been reduced and some have been increased to
better follow the audio configurations in BAP and support
more incoming data.
Also removes HRS as that is not used by LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Content-format tests do not require network or
Newlibc, so by removing these filters.
Defined a native_posix as the only integration platform
because all simulated arm-zephyr-eabi platforms are
filtered out by Twister.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
As the lwm2m_reset_message() is stubbed, it does not remove
a message from rettry queue. Therefore depending on the
simulation speed, retries can happen one or many times.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
ZTEST(lwm2m_registry, test_strings) is using opaque resource
0/0/3 to write a test string "coap://127.0.0.1" which
happens to be same length as default key size.
Need more room to add end marker and verify it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The POSIX arch now also supports embedded libCs for some
targets. Narrow the test filter accordingly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The bt_has_register_param was renamed to bt_has_features_param
recently. Fixes build errors.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
The host app should increment the sequence number within SDU interval
whether it has any data to send data to the controller or not.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Add TEST_WORK_ITEM_WAIT_MS and TEST_SUBMIT_WAIT_MS config parameters
instead of hardcoded timeouts at kernel.workqueue test to allow its
customization on slow simulated platforms.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Pause and resume functionality was written into assumption
that sockets are closed before resuming.
With use new options CONFIG_LWM2M_RD_CLIENT_STOP_POLLING_AT_IDLE
or CONFIG_LWM2M_RD_CLIENT_LISTEN_AT_IDLE this is not always true.
Fix the state machine, so that on those cases, sockets are not
closed and resume is always similar like from the QUEUE mode.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Usage of 64-bit address constants from devicetree without a
UINT64_C wrapping macro results in the following warning and the
cut-off of the address value:
"warning: integer constant is so large that it is unsigned"
This change extends devicetree API adding few wrappers over the
address constant getters which add ULL size suffix to an
address integer literal when the appearance of 64-bit address
values is possible
Signed-off-by: Alexander Razinkov <alexander.razinkov@syntacore.com>
This commit adds tests for the stat command. Stat on the
root of the filesystem is not yet supported.
Signed-off-by: Vincent van Beveren <v.van.beveren@nikhef.nl>
When writing a test suite, it's more common to want the 'before'
hook to run in privilaged mode, even when the test is run in userspace.
Reconfigure ztest to first run the test thread callback in privilaged
mode and only enter userspace after the test rule and suite's 'before'
functions ran.
Signed-off-by: Yuval Peress <peress@google.com>
This change ensures that openthread network topology will be formed
properly, by delaing start of echo client application.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Previous fix https://github.com/zephyrproject-rtos/zephyr/pull/58891
introduced failure in driver tests suite. This patch corrects the error
and reverts max_mapped_page field definition.
Adds max_mapped_pages stats reset after unmaping of unused memory.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Make sure that `poll(..., POLLIN)` executed from another thread returns
when `eventfd_write()` is called. Test also the same with `poll(...,
POLLOUT)` and `eventfd_read()` on eventfd with counter equal to
`UINT64_MAX - 1`.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add an input build_all test with a bunch of input driver, move the
ft5336 one out of sensors as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When CONFIG_PM_DEVICE is enabled IPC Device may be during power transition
during a call to intel_adsp_ipc_send_message function.
Changed signatures of intel_adsp_ipc_send_message and its sync version
to return int and negative error codes on error.
On attempt to send IPC message during Device power transition
-ESHUTDOWN error code is returned, on busy state -EBUSY.
Updated all function references.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
This moves CONFIG_KERNEL_COHERENCE from prj.conf to Kconfig.
This gets rid of the cmake warning where CONFIG_KERNEL_COHERENCE
is assigned the value 'y' but gets the value ''. This is simply
done to avoid confusion when running the test manually.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Don't assume the connection handle will always be 0. This is currently the
case with the Zephyr link layer, but recently changed in the Softdevice
Controller.
Another problem is that apparently the spec allows the controller to just
blackhole data instead of returning `BT_HCI_ERR_UNKNOWN_CONN_ID` if the
host uses a wrong handle.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- Remove raising compilation error in `float_regs_arm_gcc.h`
These macros are checked in 'load_store.c', so no need to check them
again in 'float_regs_arm_gcc.h'
- Enable this test on the VFP platform of aarch32
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
When writing string data to resources which are string types,
we should count in the terminating character into the data length.
Corner cases exist where LwM2M resource type is opaque but
lwm2m_get_string() or lwm2m_set_string() are used to read/write
the data. We must ensure string termination on those case, but
terminating character must not be stored in the engine buffer
or counted in the data length as this might be considered
as part of the binary data.
Fixes#59196
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
