Initialization of local variable 'illegal' can't be optimized, or the
program will jump to the memory contains random value which causes the
unexpected behavior. Add volatile to local variable 'illegal' to prevent
compiler optimization.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add runtime error checking to k_pipe_cleanup and k_pipe_get and remove
asserts.
Adapted test which was expecting a fault to handle errors instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
'build_only' directive may not be justified here and
prevent to see issue when running the test.
Similarly to non tickless version exclude qemu_x86_coverage
and qemu_cortex_m0 platforms.
It was actually tested failed on qemu_cortex_m0, no error
reported on qemu_x86_coverage, but removed to be safe on that side
as well.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Interrupts should not be locked when servicing a system call,
and the kernel should not think we are in an interrupt handler
either.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Exceptions on x86_64 are incorrectly implemented, and if
a preemptible thread faults, and in its overridden
k_sys_fatal_error_handler() does something which invokes
a scheduling point (such as here where we give semaphores),
the thread will be swapped out on the per-CPU exception stack
and probably explode when it is switched back in.
For now, change the faulting thread priority to co-op so this
doesn't happen.
Workaround for #21462
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This doesn't work properly on x86 unless the dynamic thread
struct allocated gets lucky and is aligned to 16 bytes.
Disabling for now until #17893 is fixed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Most of the scenarios in this test case spawn child threads
and expect them to complete before execution proceeds.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nearly all of these cases create a child thread that needs
to complete before the main test proceeds further. If the
child thread runs simultaneously on another CPU, this gets
messed up.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test spawns a child thread and expects it to complete.
Use one CPU for it. Get rid of the useless k_thread_abort()
call and add a k_yield() to ensure the child does its
thing.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol should already be getting enabled if CONFIG_USERSPACE is
enabled, because CONFIG_ERRNO is default y and has
select THREAD_USERSPACE_LOCAL_DATA if USERSPACE
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Capture the value of the volatile variable outside the assert and use
the captured value in the assert.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The $srctree environment variable is already set to point to the Zephyr
root, so no need to do
source "$(ZEPHYR_BASE)/Kconfig.zephyr"
in samples. Just
source "Kconfig.zephyr"
works.
(Things would break if $srctree was set to anything else, because every
'source' in the Kconfig files will be relative to it.)
Also add a 'mainmenu' title to the littlefs sample. It shows up at the
top of menuconfig/guiconfig. Source Kconfig.zephyr instead of Kconfig to
avoid overriding it.
As a sidenote, $(FOO) is better $FOO in Kconfig. $FOO is legacy syntax
that Kconfiglib only supports to be compatible with old Linux kernels.
$(FOO) uses the Kconfig preprocessor.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The minimum possible mempool block size is either 8 or 16 for 32-bit or
64-bit targets respectively. Defining BYTES_TO_WRITE to 4 and using that
with K_MEM_POOL_DEFINE() won't produce the expected result i.e. only 1
block at any time could be allocated instead of 4.
Yet, the test does run successfully regardless of the block allocation
loop in tpipe_block_put().
It turns out that the pipe buffer is large enough to consume all the
block data synchronously, meaning that the mempool block is freed right
away and available for the next loop iteration. This also means that the
asynchronous delivery mechanism is never exercized.
Fix both issues by defining PIPE_LEN and BYTES_TO_WRITE in terms of
_MPOOL_MINBLK with the expected factor of 4, and adding a new test
using the half-sized pipe where the pipe buffer gets saturated and
mempool memory blocks are actually queued for asynchronous consumption.
The source data string has to be extended to accommodate larger pipe
sizes too.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This test has a race condition between the start of
its statically initialized threads running on another CPU,
and the assignment of those threads to a memory domain in the
ztest_main() function. Disable SMP for this test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
tc_number is passed to a child thread as a parameter, which is
void *. We want to treat it as an integer, but a direct cast
to int causes a warning on 64-bit platforms; cast to uintptr_t
first to suppress it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
test_queue_supv_to_user() invokes a child thread which does some
work which must take place before the call to k_queue_cancel_wait()
is called by the parent.
However, with SMP enabled, the child thread will just run on another
CPU and we have a race between when child_thread_get() calls
k_queue_get(q, K_FOREVER) and the parent calls k_queue_cancel_wait().
If the parent thread gets there first, the whole test hangs as
the call to k_queue_get(q, K_FOREVER) sits forever.
The fix is to have test_queue_supv_to_user() be a 1cpu test, which
ensures that only one CPU is used.
It's not clear to me why this wasn't causing CI failures on other
SMP targets, but I am able to reproduce reliably on qemu_x86_64
with my user mode patches applied.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When networking is selected, building the test
fails with:
undefined reference to `z_impl_k_thread_create'
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In addition to not assuming all pointers fit in a u32_t,
logic is added to find the privilege mode stack on x86_64
and several error messages now contain more information.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test has a problem, specifically in the scenario for
test_mem_domain_remove_partitions. A low priority thread (10)
is created which is expected to produce an exception. Then
the following happens:
- The thread indeed crashes and ends up in the custom fatal
error handler, on the stack used for exceptions
- The call to ztest_test_pass() is made
- ztest_test_pass() gives the test_end_signal semaphore
- We then context switch to the ztest main thread which is
higher priority, leaving the thread that crashed context
switched out *on the exception stack*
- More tests are run, and some of them also produce exceptions
- Eventually we do a sleep and the original crashed thread is
swapped in again
- Since several other exceptions have taken place on the
exception stack since then, resuming context results in
an unexpected error, causing the test to fail
Only seems to affect arches that have a dedicated stack for
exceptions, like x86_64. For now, increase the priority of
the child thread so it's cleaned up immediately. Longer-term,
this all needs to be re-thought in the test case to make this
less fragile.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The requests are somewhat larger on 64-bit since we
are allocating structs with pointer members. Increase
these to a larger multiple of the minimum block size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Builds of docs with doxygen 1.8.16 has a number of warnings of the form:
'warning: unbalanced grouping commands'. Fix those warnings be either
balancing the group command or removing it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Device initialization may require use of generic services such as
starting up power rails, some of which may be controlled by GPIOs on
an external controller that can't be used until full kernel services
are available. Generic services can check k_is_in_isr() and mediate
their behavior that way, but currently have no way to determine that
the kernel is not available.
Provide a function that indicates whether initialization is still in
pre-kernel stages where no kernel services are available.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We break out of the while loop on a 2 count then we assert on 2, this
seems to never fail. Count to the end and then assert.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
timer_api requires TEST_USERSPACE activation which is missing
in tickless configuration of the test.
Enable flag in prj_tickless.cnf
Fixes#20904
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add a test that repeatedly reschedules a timer before it expires, and
has no other timers active. If the timer internal state overflows due
to counter wrap either the uptime or the tick counter may appear to go
backwards. The test runs until it fails, or until a specified amount
of measured time has passed.
This test is build-only for automated test programs as the default
limit to pass is one hour, and some platforms may require an even
longer period.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adding kernel tag in tests/kernel/early_sleep and sleep tag
in tests/kernel/sleep. So both early_sleep and sleep suites
have the same tags.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add test cases to make sure that a thread that suspends itself stops
executing immediately, and that a thread suspended while sleeping does
not wake up unexpectedly when its timeout expires.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Coverity's analysis is not happy about using a volatile variable
in an assert, even if the assert is not optionally compiled in.
Avoid the issue by loading the value in an automatic varible before
using it in the assert.
CID: 206016
CID: 206018
CID: 206019
CID: 206021
Fixes: #20968Fixes: #20966Fixes: #20965Fixes: #20963
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
As implemented this test runs for 20 s with no output, which makes it
difficult to identify the cause of failure. Add output indicating
progress, and emit diagnostics a particular failure observed on iMX
boards.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Test that meta-IRQ returns to the cooperative thread it interrupted,
and not to whichever thread is highest priority at that point.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix coverity issue 20534: read the status of a volatile
variable in an ASSERT statement via a stack variable
declared and defined for this purpose.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
