Sort by testcase name and path and not by platforms. This way we do not
have the same platform executing on CI system causing failures to
overload.
Right now we have almost all qemu targets executing on 1 or 2 nodes,
causing those systems to be overloaded. Instead of taking the default
sorting by platforms, we now sort by testcases, so the distribution is
more "random", but still reproducible.
Remove the ordering function that would put native_posix in the first
set, it is not being used anymore.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Outer if is checking if the variable is in a list with two options
which means that we can just do an if / else and remove an assignment.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Timeouts were not reported correctly in the XML file as failures,
causing some confusion in the shippable results.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is often needed to run sanitycheck and exclude a specific platform or
multiple platforms. Add an option to provide this using
--exclude-platform. The option can be used multiple times to exclude
multiple platforms at the same time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using --runtime-artifact-cleanup, the script will now remove all
artifacts of passing tests. This is useful for running sanitycheck on
systems with little disk space.
Fixes#21922
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Show how many tests passed out of those that were actually
performed, not including skipped tests (which we also report
a count of)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
stderr from the binary handler (native_posix for example) was redirected
to the logger as errors, this is confusing the console and users, so
remove this.
Fixes#21784
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure we close the pipe file handles after we are done, otherwise we
will end up with too many open file descriptors and crash...
Fixes#20974Fixes#21637
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Makes it much easier to inspect them in a different terminal
from where the test was run. These paths tend to be long
anyway, even if relative.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Sanitycheck used to delete the output directory if -n
wasn't used, but now it renamed it. Add a new flag to
enable the old behavior.
Do not use logging for these early messages, logger
hasn't been set up yet.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The code has a lot of sys.exit() calls, but internally these
just raise a special exception. Add a try...finally block
to ensure 'stty sane' is run before leaving the script.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is needed when a board needs to be reset using an external commands
or tools that are not part of the flash command. For example, power
reset or by poking a GPIO header on the board using external wiring.
add post_flash/pre_flash to the platform section in the hardware map.
For example:
- available: true
connected: true
id: OSHW000032254e4500128002ab98002784d1000097969900
platform: reel_board
post_script: /tmp/post_flash.sh
pre_script: /tmp/pre_flash.sh
product: DAPLink CMSIS-DAP
runner: pyocd
serial: /dev/ttyACM11
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a static method for dumping hardware map and reuse it across the
script reducing duplicated code.
Fixes#21475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added support of the Microchip with FTDI serial devices to be able
create a hardware map for them. In the future that hardware map
for the Microchip board will let run automatic Sanitycheck tests on it.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
timeouts were not reported correctly and we were getting the default
'N/A' in case of a timeout.
Fixes#21438
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When testing with one device and without a hardware map, make sure we
load the temporary map into the suite.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
More changes moving away from using global options and instead using
class variables and parameters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This function is not used anywhere else now that we use logging module,
so push this into the class where it is being used.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The use of a global options variable is making it very difficult to
create a testsuite for this script, so reduce and push options into
arguments instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Drop custom output functions and use logging mode for almost all
reporting. Also log everything into sanitycheck.log so detailed run
information can be inspected later, even if we did not run with
--verbose mode on the console.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Stop using global options and instead use propagated variable.
This is to make testing of sanitycheck easier.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When something goes bad during the flashing process set the reason
correctly and put the error messages from the flasher into device.log
and display the location of that file instead of an empty handler.log
right now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all hardware map generation/usage to a seperate class. This will
make it easier to extend the supported hardware in the future.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It appears that ninja 1.6.0 or greater don't seem to send SIGTERM down
to the child processes and thus we don't terminate correctly. This
causes a hang with renode simulations.
Change terminate call to 'self.try_kill_process_by_pid()' when test
state is updated (i.e. done running with either passed or failed), in
order to explicitly send a SIGTERM to the simulator process before
sending a SIGTERM to ninja.
Refactor the terminate code so we encapsulate the behavior in one place
for a BinaryHandler.
Based on change from Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
