CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename the struct from bt_vcs to bt_vcs_included, and
rename bt_vcs_get to bt_vcs_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_vcs as
an opaque pointer to a VCS service instance (local
or remote) to match the service instance pointers of
AICS and VOCS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_mics to bt_mics_included, and
rename bt_mics_get to bt_mics_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_mics as
an opaque pointer to a MICS service instance (local
or remote) to match the service instance pointers of
AICS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Simple tests that verify that TXTIME parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbu parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbv parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable building the LMP90xxx driver (move devicetree nodes over from the
sensors/spi.dtsi). Limit to building on a single platform as this
is just making sure the drivers compile.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The testcase.yaml had multiple tests defined but they didn't do anything
different. Remove the duplication and rename to drivers.hwinfo.api.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit enables dac_loopback to build and run on stm32f3_disco
platform.
This has been tested with twister and also as a standalone
dac_loopback test and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables test_dac to build and run on stm32f3_disco
platform.
This has been tested with twister and also as a standalone test_dac
test and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Now that we've split out the build_all test there are a few left
over files that aren't needed any more.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The clock control & general driver build tests as they don't get
us any additional coverage then from what we get from the build all
test of tests/kernel/common/kernel.common on all platforms.
Additionally, remove drivers.conf as the file isn't used in any tests.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The timings were too tight for TLS tests executing on nRF52840 with
hardware entropy source enabled. Increase the timings to make tests
pass.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to increase test coverage, this commit updates the libcxx test
to run with both full and nano variants of the newlib.
Note that C++ exception handling feature is only enabled for the newlib
full variant because the nano variant does not support C++ exception
handling.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use the full version of newlib (i.e. not nano) for libcxx testing since
some features (e.g. C++ exception handling) require the full version of
newlib.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The AUDIT_LOG partition cannot be used in TF-M builds
with the IPC mode (CONFIG_TFM_IPC=y); we have added a
relevant dependency for this. So we can cleanup the
CONFIG_TFM_PARTITION_AUDIT_LOG=n from the configuration
files of the samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add `hwinfo_get_reset_cause` and `hwinfo_clear_reset_cause` to retrieve
and to clear cause of system reset on supported platforms.
Different platforms can provide different causes of reset, however
there is a great deal of overlap. `enum reset_cause` can be expanded in
the future to support additional reasons, as additional platforms are
supported.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Both NPCX7/9 uses the IRQs at the end of the vector table, for example,
the IRQ 60 and 61 used for Multi-Input Wake-Up Unit (MIWU) devices by
default, and conflicts with ISR used for testing.
This CL changes TEST_NUM_IRQS (The value is changed from 46 to 44) to
move IRQ used for this test suite from 42 to 40 which is reserved in
both NPCX7 and NPCX9 series to resolve the issue.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Introduce the npcx9m6f_evb board driver. NPCX9M6F_EVB board is a
development platform to evaluate the Nuvoton NPCX9 series
microcontrollers. This board needs to be mated with part number
NPCX996F.
It also includes:
1. Add CONFIG_BOARD_NPCX9M6F_EVB definition for adc test suite.
2. Add npcx7m6f_evb.overlay file for gpio test suite.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Fixed mutli-IP DNS resolution as previously the same IP address was
used to populate all AI entries and added DNS_RESOLVER_AI_MAX_ENTRIES
config entry to define max number of IP addresses per DNS name to be
handled.
Signed-off-by: Ievgen Glinchuk <john.iceblink@gmail.com>
MCP4725 is an I2C dac that was added with PR #33481. This can now be
added to the bl5340_dvk device tree.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
The existing test puts the same value into all FP registers, runs a
secure service which is then interrupted by a thread that clobbers the
registers.
This patch instead puts different values into each register to test
that each register is restored in the right order.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Remove the bt_conn pointer from the VOCS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit implements the microphone input control service
(MICS) and client, The implementation supports and uses the
Audio Input Control Service (AICS) secondary service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit makes the flash test generic. The flast test will
look for storage partition in the soc-flash for testing.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
The NXP I2S driver queues 2 receive buffers to avoid receive overflows.
Allocate an extra block so we do not see test failures due to allocate
failures
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This commit increases the newlib heap size to 2048, which is the
recommended minimum required to ensure proper operation of the newlib
nano used by test (see #35799).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit increases the heap size for the newlib nano test to 2048,
which is the recommended minimum required to ensure proper operation
(see #35799).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The ehl_crb board has hardware issue that prevents this test from
being able to pass this otherwise-correct test. So exclude ehl_crb
from the testcase.yaml.
Fixes#33544.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Remove minnowboard configuration which is very basic and can be brought
back by just taking another X86 configuration. We have not tested this
board for a while and it is not being used actively, so remove it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board was added to test coverage feature when coverage was
introduced. This is now being testing with other boards and
configurations on a regular basis, so no need for this extra overhead in
CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
