This test fails on x86_64 qemu due to SMP. As Power Mgmt isn't really
supported on SMP currently limit this test to 1 CPU.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the function conn_param_update, it should send the opcode
GAP_CONN_PARAM_UPDATE, instead, it send GAP_PASSKEY_ENTRY.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
Adding support for Quectel BG95 Modem offloaded driver
to zephyr.
The driver currently implements only the
client side functions of the "socket_op_vtable", and
so cannot be used for cases where Zephyr acts as a
server. Moreover the driver only supports TCP for now.
Looking through the guides, the same driver should be
usable for BG96 (and other modems) except for the modem
boot-up sequence. Hence its named as "bg9x" instead of
"bg95".
Tested extensively with Zephyr acting as MQTT endpoint
and publishing / subscribing data to / from an MQTT
broker.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Provide a helper to extract the devicetree node_id for a GPIO
controller from a gpio phandle array. This can be used with
DEVICE_DT_GET() to directly reference the corresponding controller
device.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When defining system calls, it is very important to ensure that
access to the API’s private data is done exclusively through system
call interfaces. Private kernel data should never be made available
to user mode threads directly. For example, the k_queue APIs were
intentionally not made available as they store bookkeeping
information about the queue directly in the queue buffers which are
visible from user mode.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add configurations to test shell feature sets. It will be helpful
both to users and for ensuring the flags continue to work.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
build_on_all here was supposed to be a smoke test to test building on
all platforms, it should not be used for more than 1 just test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The biggest required padding is equal to `align - chunk_header_bytes`
and not `align - 1` given that the header already contributes to the
padding.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Adds a K_DELAYED_WORK_DEFINE, matching the K_WORK_DEFINE macro, with
accompanying Z_DELAYED_WORK_INITIALIZER macro.
Makes k_delayed_work_init a static inline function, like its K_WORK
counterpart.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When adding the new partition to a memory domain the system must
assert that it does not overlap with any other existing partitions
in the domain.
Test to add new partition which has same start address as an
existing one, after that must happen an assertion error indicating
that new partition overlaps existing one.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Nothing in the API description the delayed work structure sanctions
direct reference to internal fields. Do not assume that a delayed
work item can be initialized in any way other than by invoking the
delayed work item init function. Do not assume that a delayed work
item can be submitted without delay by invoking k_work_submit() with a
reference to the contained work item.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The socket pairs created for this test when run under user mode are
accessible only from the thread that created them. Although it is
possible for that thread to grant access to another thread:
* there does not appear to be a way to do that when referencing a
descriptor rather than a pointer to a kernel object;
* there is no public API that supports granting the object rights to a
user thread that animates a work queue.
Until these gaps are addressed use the system work queue run
supervisor-mode threads to verify the asynchronous behavior of the
API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adjust the test thread priority so that the test / IP stack
has a chance to run and the test passes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In test_pipe_user_thread2thread(), what should be tested is
the pipe, which allocated with k_object_alloc(), rather than
"pipe" and "kpipe". That two pipes are already teseted in
test_pipe_thread2thread().
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
A socket which didn't undergo completed connect() or accept() calls
should react with ENOTCONN to recv() call. This test checks both
a freshly created socket ("client" one) and a socket in LISTEN
state ("server").
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Factor out the CONFIG_CBPRINTF_LIBC_SUBSTS exception.
Remove redundant lines and obsolete comment.
Make some code pattern more consistent.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
subpress warnings from llvm:
warning: absolute value function 'abs' given an argument of type
'int64_t' (aka 'long long') but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a new CONFIG_MPU which is set if an MPU is enabled. This
is a menuconfig will some MPU-specific options moved
under it.
MEMORY_PROTECTION and SRAM_REGION_PERMISSIONS have been merged.
This configuration depends on an MMU or MPU. The protection
test is updated accordingly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add build test for Xilinx drivers for devices which are not present on
any in-tree boards.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Make sure that "%ld" gets a long int argument.
This commit eliminates a couple of compiler warnings of this kind:
test_fat_file.c: In function 'test_file_truncate':
test_fat_file.c:180:11: error: format '%ld' expects argument
of type 'long int', but argument 2 has type 'off_t' {aka 'int'}
[-Werror=format=]
180 | TC_PRINT("Original size of file = %ld\n", orig_pos);
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
CONFIG_FPU selects support for formatting floating point numbers,
which increases the stack requirements for cbprintf, causing this test
to overrun its stack.
Since this test doesn't format floating point numbers, use
CBPRINTF_NANO to revert to using the small-footprint formatter.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Tests that include floating-point format specifications may need
cbprintf FP support. Make sure it's available.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Although flags with pointers are not defined behavior, there is a
desire to have them work, so add a test and fix the complete
implementation so it passes.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Represent IPv6 addresses as groups of 16-bit values in test vectors.
This commit corrects the following two test issues on big endian
systems:
START - test_ipv6_pton_1
Failed to verify ff08::
against 0:ff08::
START - test_ipv6_ntop_1
Failed to verify 0:ff08::
against ff08::
Makes the following tests pass on qemu_leon3:
- net.util
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
We have a use case for checking the results of a DT_PROP_HAS_IDX()
call with COND_CODE_1(). That won't work because its expansion is an
integer comparison; COND_CODE_1() expects a literal 1 or 0.
Adjust the macro implementation so it expands to a literal 1 or 0.
Make this work even when the index argument needs an expansion while
we're at it.
Fixes: #29833
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The test reads and writes outside the bounds of an array allocated on
the stack in check_input(). This commit disables the test on SPARC.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The BIT_INDEX() macro assumed little-endian. This commit adds
big-endian support, conditioned on the preprocessor define
CONFIG_BIG_ENDIAN.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
