This change extends the Bluetooth API to support pairing with the OOB
data that are used in the Authentication Stage of the pairing procedure.
The LE Secure Connections specific API for OOB pairing is also added.
The general OOB API should be able to accomodate the LE legacy pairing
later on.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add an event handler for HCI vendor-specific events with the
event code BT_HCI_EVT_VENDOR.
A vendor defined callback can be registered to be called when
vendor-Specific events are received in the stack. The callback can then
decode and handle the event; if not the stack will decode and handle
the event.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When using the procedure Read By Type the response may contain multiple
instances so it needs to be parsed properly. When dealing with long
values only the beggining will be read, for the remaining bytes the
application should issue another bt_gatt_read with offset so Read Blob
procedure is used as recommended by the spec:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F page 2312:
The Read Blob Request would be used to read the remaining octets of a
long attribute value.
Fixes#16107
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reintroduces support for static service in the form of a new API,
BT_GATT_SERVICE_DEFINE, and changes the internal services (GAP/GATT)
to be defined as const as they are never register/unregistered.
Internal service needed to be renamed in order to keep the same order
as before since the section elements are sorted by name.
The result is the following (make ram_report):
before:
gatt.c 572 0.66%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gap_attrs 180 0.21%
gap_svc 12 0.01%
gatt_attrs 160 0.18%
gatt_sc 80 0.09%
gatt_svc 12 0.01%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
after:
gatt.c 210 0.24%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gatt_sc 80 0.09%
last_static_handle 2 0.00%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds support for Read Using Characteristic UUID which is one
of the procedure to read the characteristic value especially when the
client only knows the characteristic UUID and does not know the handle
of the characteristic.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Update read and write callback documentation regarding local access of
the attribute contents.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The commit 8d0ef1eb85 attempted to fix
test case MESH/SR/HM/CFS/BV-02-C, however inadvertently ended up
introducing a hidden bug. This bug was unearthed thanks to commit
686f5c79cf. We have to keep always track
of the FastPeriodDivisor state whether we're using it (faults > 0) or
not (faults == 0). Introduce a boolean field to the model publication
that's used to indicate whether the FastPeriodDivisor should be
applied or not, instead of zeroing the divisor when there are no
faults (this would cause wrong behavior when faults appear again).
Additionally, the PTS seems to require that we wait until the end of
the existing period before sending the next Health Current Status,
rather than sending it immediately when the fault count changes.
Fixes#15365
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to advertise directed to a privacy enabled central the
initiator field of the directed adv packet needs to set to an RPA.
To instruct the controller to use an RPA in the initiator field own
address type should be set to either 0x02 or 0x03.
Since it is not certain that a remote device supports address resolution
of the initiator address we add an option to turn this on and give the
application the responsibility to check if peer supports this.
Fixes#14743
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds BT_GATT_DISCOVER_ATTRIBUTE which can be used to discover any
type of attribute in a given range.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Clarify how the bt_conn_create_slave_le() API can be used to get each
of the two possible advertising packet types.
Fixes#14160
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds another helper macro called BT_GATT_CCC_MANAGED which can be
used to set 2 new callbacks:
- cfg_write: Which application can set if it wants to manage writes to
CCC configuration.
- cfg_match: Which application can set if it wants to manage matching
CCC configuration when notifying/indicating.
BT_GATT_CCC_MANAGED retains the ability of saving peer configuration
on storage making it useful for clients which are only interrested in
managing the CCC configuration but not the storage itself.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Translate HCI error codes to POSIX error codes in order to be able to
distinguish reason of connectable advertising start failure.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
The Bluetooth 5.1 specification was recently released, and has a new
version identifier (10) assigned to it in the Bluetooth Assigned
Numbers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the Friendship & Low Power Node features aren't
available or feasible, however power saving is nevertheless required.
This patch introduces two new APIs to suspend and resume the Mesh
network. Currently, what this impacts is the LE scanning, the
ability to allocate new outgoing buffers, as well as the model
publishing, beacon and heartbeat timers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Preliminary work done towards Mesh extensions on the old LL
architecture implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds bt_gatt_write_response_cb works similarly to
bt_gatt_notify_cb which can take a callback to be called when the PDU
is considered transmitted over the air.
Note: This can also be used to disable the ATT flow control which would
blocks sending multiple commands without wainting their transmissions.
Fixes#11558
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This should make it more clearer what APIs are intended to be used with
server and client instances, in addition to that mention on the function
documentation when operation is valid only for local attributes.
Fixes#12138
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In conn.h the comments on src/dst in bt_conn_le_info and
bt_conn_br_info does not clearly state the point of view.
src could both be perceived as the connections point of view
(src = local address) or the call-back where the structs are
used point of view (src = remote address).
The comments about src/dst has been made more clear.
Signed-off-by: Theis Blickfeldt <ttjo@oticon.com>
There is not an easy way to relate an application's user_data to a
connection. One way is to save a pointer to bt_conn in the
application's user_data array upon connection establishment.
Each connection related callback function will have to loop for all
user_data and compare the saved pointer to the passed bt_conn
pointer. This is inefficient if there are many callback activations
during the connection.
This change makes the internal bt_conn mapping function accessible to
applications in conn.h. The function name is changed to
bt_conn_index() to clearly indicate that the function returns an
index of an array.
Add an ASSERT to catch illegal parameter.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Application may need to handle the write differently depending on the
write operation so this adds a flag called BT_GATT_WRITE_FLAG_CMD which
can then be checked by the callback, for instance one can respond with
BT_ATT_ERR_WRITE_REQ_REJECTED when that flag is not set which should
indicate to the client to use write command instead.
Fixes#11206
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit moves the BLE GATT Device Information service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and adds
a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This adds new API fuction to update running advertising data.
It will remove the need of advertising restarting.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
These macros are helpful for using the configuration client API with
periodic model publication.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a possibility to reject incomming LE Connection request
due to insufficient authorization or encryption key size.
This is needed for qualification purposes
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds support for returning various return codes from
the channel accept callback.
This is needed for implementation of incoming connection
authorization for certification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit adds missed const modifier for addr pointer for
bt_le_set_auto_conn function
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
So far the stack hasn't provided any way for the application to access
the existing bonds. This patch adds such an API.
Fixes#10122
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows to provide public address for controller without using
VS HCI command from host. Useful for controller only builds or
combined builds that are not using VS HCI commands.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Add functionality for setting the host channel classification in
the controller using the HCI command.
This closes issue #9851
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds a function that will disable Bonding flag in
Authentication Requirements flag in SMP Pairing Request/Response.
This is needed for qualification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will exclude testing Mesh related code from build if BT_MESH
option in Kconfig is not set.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
None of the data for the CEP, CUD and CPF descriptors needs to be
modified by the stack at runtime. Make it possible to pass constant
data to the descriptor macros, and make sure the descriptor handlers
cast the data back to be a constant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
