Renamed to make its semantics clearer; this function maps
*physical* memory addresses and is not equivalent to
posix mmap(), which might confuse people.
mem_map test case remains the same name as other memory
mapping scenarios will be added in the fullness of time.
Parameter names to z_phys_map adjusted slightly to be more
consistent with names used in other memory mapping functions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use GEN_OFFSET_SYM macro to genarate absolute symbols for the
_callee_saved struct and use these new symbols in the assembly code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to gather the first thread runtime statictic:
thread execution time. It provides a rough idea of how much time
a thread is spent in active execution. Currently it is not being
used, pending following commits where it combines with the trace
points on context switch as they instrument the same locations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the common struct fields and functions to support
the implementation of thread local storage in individual
architecture. This uses the thread stack to store TLS data.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The core kernel does not use this yet, but it will be later used
as part of infrastructure for memory-mapping stacks, as detailed
in #28899.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr SMP kernels need to be able to run on architectures with
incoherent caches. Naive implementation of synchronization on such
architectures requires extensive cache flushing (e.g. flush+invalidate
everything on every spin lock operation, flush on every unlock!) and
is a performance problem.
Instead, many of these systems will have access to separate "coherent"
(usually uncached) and "incoherent" regions of memory. Where this is
available, place all writable data sections by default into the
coherent region. An "__incoherent" attribute flag is defined for data
regions that are known to be CPU-local and which should use the cache.
By default, this is used for stack memory.
Stack memory will be incoherent by default, as by definition it is
local to its current thread. This requires special cache management
on context switch, so an arch API has been added for that.
Also, when enabled, add assertions to strategic places to ensure that
shared kernel data is indeed coherent. We check thread objects, the
_kernel struct, waitq's, timeouts and spinlocks. In practice almost
all kernel synchronization is built on top of these structures, and
any shared data structs will contain at least one of them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Strictly speaking, any access to a mem domain or its
containing partitions should be serialized on this lock.
Architecture code may need to grab this lock if it is
using this data during, for example, context switches,
especially if they support SMP as locking interrupts
is not enough.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When threads exited we were leaving dangling references to
them in the domain's mem_domain_q.
z_thread_single_abort() now calls into the memory domain
code via z_mem_domain_exit_thread() to take it off.
The thread setup code now invokes z_mem_domain_init_thread(),
avoiding extra checks in k_mem_domain_add_thread(), we know
the object isn't currently a member of a doamin.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Both operands of an operator in the arithmetic conversions
performed shall have the same essential type category.
Changes are related to converting the integer constants to the
unsigned integer constants
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Fixes races where threads on another CPU are joining the
exiting thread, since it could still be running when
the joiners wake up on a different CPU.
Fixes problems where the thread object is still being
used by the kernel when the fn_abort() function is called,
preventing the thread object from being recycled or
freed back to a slab pool.
Fixes a race where a thread is aborted from one CPU while
it self-aborts on another CPU, that was currently worked
around with a busy-wait.
Precedent for doing this comes from FreeRTOS, which also
performs final thread cleanup in the idle thread.
Some logic in z_thread_single_abort() rearranged such that
when we release sched_spinlock, the thread object pointer
is never dereferenced by the kernel again; join waiters
or fn_abort() logic may free it immediately.
An assertion added to z_thread_single_abort() to ensure
it never gets called with thread == _current outside of an ISR.
Some logic has been added to ensure z_thread_single_abort()
tasks don't run more than once.
Fixes: #26486
Related to: #23063#23062
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
* Move switched_in into the arch context switch assembly code,
which will correctly record the switched_in information.
* Add switched_in/switched_out for context switch in irq exit.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Memory mapping, for now, will be a private kernel API
and is not intended to be application-facing at this time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It implements gdb remote protocol to talk with a host gdb during the
debug session. The implementation is divided in three layers:
1 - The top layer that is responsible for the gdb remote protocol.
2 - An architecture specific layer responsible to write/read registers,
set breakpoints, handle exceptions, ...
3 - A transport layer to be used to communicate with the host
The communication with GDB in the host is synchronous and the systems
stops execution waiting for instructions and return its execution after
a "continue" or "step" command. The protocol has an exception that is
when the host sends a packet to cause an interruption, usually triggered
by a Ctrl-C. This implementation ignores this instruction though.
This initial work supports only X86 using uart as backend.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We make a policy change here: all threads are members of a
memory domain, never NULL. We introduce a default memory domain
for threads that haven't been assigned to or inherited another one.
Primary motivation for this change is better MMU support, as
one common configuration will be to maintain page tables at
the memory domain level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds a very primitive coredump mechanism under subsys/debug
where during fatal error, register and memory content can be
dumped to coredump backend. One such backend utilizing log
module for output is included. Once the coredump log is converted
to a binary file, it can be used with the ELF output file as
inputs to an overly simplified implementation of a GDB server.
This GDB server can be attached via the target remote command of
GDB and will be serving register and memory content. This allows
using GDB to examine stack and memory where the fatal error
occurred.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move tracing switched_in and switched_out to the architecture code and
remove duplications. This changes swap tracing for x86, xtensa.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This now takes a stack pointer as an argument with TLS
and random offsets accounted for properly.
Based on #24467 authored by Flavio Ceolin.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
arch_new_thread() passes along the thread priority and option
flags, but these are already initialized in thread->base and
can be accessed there if needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- simplify dummy thread initialization to a kswap.h
inline function
- use the same inline function for both early boot and
SMP setup
- add a note on necessity of the dummy thread even if
a custom swap to main is implemented
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The core kernel z_setup_new_thread() calls into arch_new_thread(),
which calls back into the core kernel via z_new_thread_init().
Move everything that doesn't have to be in z_new_thread_init() to
z_setup_new_thread() and convert to an inline function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use of the _current_cpu pointer cannot be done safely in a preemptible
context. If a thread is preempted and migrates to another CPU, the
old CPU record will be wrong.
Add a validation assert to the expression that catches incorrect
usages, and fix up the spots where it was wrong (most important being
a few uses of _current outside of locks, and the arch_is_in_isr()
implementation).
Note that the resulting _current expression now requires locking and
is going to be somewhat slower. Longer term it's going to be better
to augment the arch API to allow SMP architectures to implement a
faster "get current thread pointer" action than this default.
Note also that this change means that "_current" is no longer
expressible as an lvalue (long ago, it was just a static variable), so
the places where it gets assigned now assign to _current_cpu->current
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These arch_timing_ defines get used in certain timer
drivers and need to be in the public include space,
and not the private kernel headers.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Similar to the suspend refactoring earlier, this really nees to be
done in an atomic block. There were two confirmable races here,
though it's not completely clear either was being hit in practice:
1. The bit operations in z_mark_thread_as_started() aren't atomic so
it needs to be protected.
2. The intermediate state in z_ready_thread() could result in a dead
or suspended thread being added to the ready queue if another
context tried a simultaneous abort or suspend.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fixes an issue where calling z_thread_malloc() would
borrow the resource pool of whatever thread happened
to be interrupted at the time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On SMP, there is an inherent race when swapping: the old thread adds
itself back to the run queue before calling into the arch layer to do
the context switch. The former is properly synchronized under the
scheduler lock, and the later operates with interrupts locally
disabled. But until somewhere in the middle of arch_switch(), the old
thread (that is in the run queue!) does not have complete saved state
that can be restored.
So it's possible for another CPU to grab a thread before it is saved
and try to restore its unsaved register contents (which are garbage --
typically whatever state it had at the last interrupt).
Fix this by leveraging the "swapped_from" pointer already passed to
arch_switch() as a synchronization primitive. When the switch
implementation writes the new handle value, we know the switch is
complete. Then we can wait for that in z_swap() and at interrupt
exit.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The original intent was that the output handle be written through the
pointer in the second argument, though not all architectures used that
scheme. As it turns out, that write is becoming a synchronization
signal, so it's no longer optional.
Clarify the documentation in arch_switch() about this requirement, and
add an instruction to the x86_64 context switch to implement it as
original envisioned.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Improve positioning of tracing calls. Avoid multiple calls and missing
events because of complex logix. Trace the event where things happen
really.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
