Starting brace was missing in the socket_select.h file so adding
it back
#ifdef __cplusplus
extern "C" {
#endif
Fixes#31444
Signed-off-by: Pablo Garrido <pablogs9@gmail.com>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch implements a service that adds multiendpoint
capabilities to RPMsg. Multiple endpoints are intended to be used
when multiple modules need services from a remote processor. Each
module may register one or more RPMsg endpoints.
The implementation separates backend from the service, what
allows to extend this module to support other topologies like
Linux <-> Zephyr.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
It can be useful to check if an unknown devicetree node identifier
refers to a known node. Add a helper for this. Under the hood, we take
advantage of the ordinals API, which provides the unique identifiers
we need.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The only two supported operations for data caches in the cache framework
are currently arch_dcache_flush() and arch_dcache_invd().
This is quite restrictive because for some architectures we also want to
control i-cache and in general we want a finer control over what can be
flushed, invalidated or cleaned. To address these needs this patch
expands the set of operations that can be performed on data and
instruction caches, adding hooks for the operations on the whole cache,
a specific level or a specific address range.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The new APIs are not only dealing with cache flushing. Rename the
Kconfig symbol to CACHE_MANAGEMENT to better reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Clean up the PWM capture API documentation a bit:
- Turn simple comments on PWM_CAPTURE_MODE_* into documentation comments
- Callback signature is always available, but note that PWM capture
support is optional
- Remove double @a
- Document return codes from pwm_pin_{enable,disable}_capture()
- Change wording to reflect that pwm_pin_capture_*() returns a single
result
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add Kconfig option to randomize the initial ACK timeout, as specified in
RFC 7252. The option is enabled by default.
Additionally, finetune the default value of COAP_INIT_ACK_TIMEOUT_MS
option, to match the default ACK_TIMEOUT value specified by the RFC
7252. The RFC does not specify the minimum/maximum value of the
ACK_TIMEOUT parameter, but only suggests it should be no lower than 1
second, so adjust the option range to reflect this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce retransmission counter to the coap_pending structure. This
allows to simplify the retransmission logic and allows to keep track of
the number of remaining retranmissions.
Additionally, extend the `coap_pending_init()` function with `retries`
parameter, which allows to set the retransmission count individually for
each confirmable transaction.
Fixes#28117
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update description to maximum and minimum values of interval_min and
interval_max fields of bt_le_adv_param struct according to
Bluetooth Core Specification 5.2
Signed-off-by: Alexey Tsvetkov <xeenych@gmail.com>
Firmware implementing the PSCI functions described in ARM document
number ARM DEN 0022A ("Power State Coordination Interface System
Software on ARM processors") can be used by Zephyr to initiate various
CPU-centric power operations.
It is needed for virtualization, it is used to coordinate OSes and
hypervisors and it provides the functions used for SMP bring-up such as
CPU_ON and CPU_OFF.
A new PSCI driver is introduced to setup a proper subsystem used to
communicate with the PSCI firmware, implementing the basic operations:
get_version, cpu_on, cpu_off and affinity_info.
The current implementation only supports PSCI 0.2 and PSCI 1.0
The PSCI conduit (SMC or HVC) is setup reading the corresponding
property in the DTS node.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This macro returns a node's full path, given its node identifier.
The entire path to a node is useful information for the user which can
be added to build-time error messages.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
1. Exclude the CODE UNREACHABLE line while generating coverage report.
2. Exclude the memory domain deprecated API when calculating code
coverage.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
This adds a somewhat special purpose IPC mechanism. It's intended for
applications which have a "work queue" like architecture of discrete
callback items, but which need the ability to schedule those items
independently in separate threads across multiple CPUs. So P4 Work
items:
1. Can run at any Zephyr scheduler priority and with any deadline
(this feature assumes EDF scheduling is enabled)
2. Can be submitted at any time and from any context, including being
resubmitted from within their own handler.
3. Will preempt any lower priority work as soon as they are runnable,
according to the standard rules of Zephyr priority scheduling.
4. Run from a pool of worker threads that can be allocated efficiently
(i.e. you need as many as the number of CPUs plus the number of
preempted in-progress items, but no more).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Needing to check the current cycle time (which involves a spinlock and
register read on most architectures) is wasteful in the scheduler
priority predicate, which is a hot path. If we "burn" one bit of
precision (and document the rule), we can do the comparison without
knowing the current time.
2^31 cycles is still far longer than a live deadline thread in any
legitimate realtime app should ever live before being scheduled.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In preparation for QSPI DMA mode:
-Add a possibility to override driver by the HAL DMA. In that case
stream is set as busy and no configuration nor treatment is done.
In case of interrupt, flags clearing is let to HAL.
-Treat Half Transfer interrupt prior to Transfer Complete for the
cases were both IRQ are both raised at the time IRQ handler is called
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When the async API is not enabled produce a link-time error rather
than a runtime error. Also document the dependence on the option.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When the async API is not enabled produce a build-time error rather
than a runtime error. Also document the dependence on the option.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adds a linker section for Cortex-M instruction tightly coupled memory
(ITCM), similar to the existing section for DTCM. A new executable MPU
region is not added as there isn't currently a need to make this section
accessible to user mode. This section can be enabled by setting a device
tree chosen node zephyr,itcm.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds missing DTCM_ADDR and CCM_ADDR macros needed by the linker script
generated by scripts/gen_relocate_app.py.
Moves associated bss_end, noinit_end, and data_end linker symbols to
account for section relocation. Without this change, the section sizes
calculated in z_bss_zero() and z_data_copy() are incorrect.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Generate a header (device_extern.h) that handles extern of possible
device structs that would come from devicetree. This removes the need
for DEVICE_DT_DECLARE and DEVICE_DT_INST_DECLARE which we can remove.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some parts of subsys/dfu/boot code are re-implementations of
what is implemented in the MCUBoot repository.
Mcuboot's repository already provide implementation of function
required for application for interact with the MCUboot.
This patch introduces new MCUBOOT_BOOTUTIL module which covers
common code which is used in the bootloader and the chainnloaded
application.
dfu/boot: use MCUBoot's source code
Module was reworked so it start using MCUBoot's
bootutil_public API instead of copied code.
Reworked boot_is_img_confirmed() used MCUBoot's API
for determine image_ok flag.
mcuboot_shell switchd to use MCUboot's boot_read_swap_state_by_id()
This is MCUBoot function, use it for avoid linking conflict.
test/subsys/mcuboot: fix `test_write_confirm`
dfu/boot library was reworked so it uses MCUboot's bootutil_public
library whenever it can.
The library required that image was marked as copy-done before it
can be pending.
This patch adds such mark which fixes the test.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
core-macros.h includes other files not part of the xtensa HAL, make this
esp32 specific
Fixes#31301
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add public function to set Constant Tone Extension transmission
enabled or disabled for periodic advertising.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_Set_Connecitonless_CTE_TX_Enable
command to HCI. Add scratch implementation of command handling
functions to controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Move thread definitions to its own header to avoid redeclaration and
redefinition of types which is not allowed in some standards.
Fixes#29937
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
x86 and x86_64 require certain alignment in the k_thread struct
since the buffer to save/restore FPU/SSE registers requires
strict alignment.
Fixes#29589Fixes#29629
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows allocating dynamic kernel objects with memory alignment
requirements. The first candidate is for thread objects where,
on some architectures, it must be aligned for saving/restoring
registers.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Extend the PWM API with optional API functions for capturing PWM pulse
width and period cycles.
Fixes#26026.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Before hooking up the MMU driver code to the Zephyr MMU core code it's
better to match the expected variable types of the two parts.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The MMU code is currently assuming that Zephyr only uses one single set
of page tables shared by kernel and user threads. This could possibly be
not longer true in the future when multiple set of page tables can be
present and swapped at run-time.
With this patch a new arm_mmu_ptables struct is introduced that is used
to host a buffer pointing to the memory region containing the page
tables and the helper variables used to manage the page tables. This new
struct is then used by the ARM64 MMU code instead of assuming that the
kernel page tables are the only ones present.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
