Instead of casting struct in6_addr, sin6_addr member is now used
directly, like in every other instance of calling net_ipv6_is_prefix().
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
For platforms using non-native stacks, net_tcp_init() should be
compiled out, similar to how it is done in tcp_internal.h.
Fixes#27463
Signed-off-by: Vincent Wan <vwan@ti.com>
Enable the new TCP stack as a default one in order to get people
to use it before Zephyr 2.4 is released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to enable CONFIG_NET_PKT_TXTIME and
CONFIG_NET_PKT_TXTIME_STATS at the same time. This will increase
memory consumption but as the CONFIG_NET_PKT_TXTIME_STATS is
only meant to be enabled for debugging purposes this overhead
can be accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In TCP, we increase the net_pkt refcount in order to resend
it later if we do not receive ACK in time. Because we are not
getting a new net_pkt, the TXTIME statistics would be calculated
incorrectly. So if we re-send, reset the net_pkt creation time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt RX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_RXTIME_STATS and
CONFIG_NET_PKT_RXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg RX net_pkt (7) time 459 us [0->23->16->257->160=456 us]
The extra stats is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt TX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_TXTIME_STATS and
CONFIG_NET_PKT_TXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg TX net_pkt (5867) time 82 us [0->33->20->27=80 us]
The extra stats information is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect information how long net_pkt has travelled in IP stack
in certain points. See network documentation what these points
are and how to get information about the timings. This initial
commit adds support to TX timing collection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Include directories for ${ARCH} is not specified correctly.
Several places in Zephyr, the include directories are specified as:
${ZEPHYR_BASE}/arch/${ARCH}/include
the correct line is:
${ARCH_DIR}/${ARCH}/include
to correctly support out of tree archs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The original return type of tcp_data_get() was unsigned and the
return value <0 was not checked properly.
Fixes#25723
Coverity-CID: 210559
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the static buffer for TCP options. Make sure that the
options were read properly to temp buffer.
Fixes: #25729
Coverity-CID: 210056
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_if a kernel object with type K_OBJ_NET_IF so that we
can restrict access to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bugfix: in tcp_conn_unref(), the conn was zeroed before removing it
from the connection list (tcp_conns).
Zeroing conn, results in zeroing its 'next' member,
which in effect removes all its following connections referred to
in tcp_conns linked list.
The solution is to move the memset() after sys_slist_find_and_remove().
Signed-off-by: David D <a8961713@gmail.com>
The network interface check was invalid when IPv6 Router
Solicitation message was timeout and interface was not found.
This is highly unlikely but needs to be checked properly.
Fixes#27145
Coverity-CID: 211511
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP2 stack does operations directly on the packet data which may
or may not be aligned. The unaligned access causes a fault on the
Cortex-M0+ so use the UNALIGNED_* macros instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Use system provided Z_STRUCT_SECTION_FOREACH() and
Z_STRUCT_SECTION_ITERABLE() macros instead of manually coding
everything for network sections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to implement a blocking connect, add a semaphore
and block on it in net_tcp_connect().
The semaphore is released when ESTABLISHED state is reached.
In case tcp_conn_unref() is called while waiting on the semaphore,
defer the unreference, tcp_conn_unref() will be called from
net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, refactor and simplify
the control flow in net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order for events to be correctly interpreted in SYN_SENT,
check for SYN and ACK simultaneosly.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
net_tcp_put() can be called before ESTABLISHED state
is reached, send FIN only in ESTABLISHED state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Current implementation of net_ipv6_send_rs() uses
net_ipv6_addr_create_ll_allnodes_mcast() for creating RS packet.
As result we send RS packet to all-nodes destination [FF02::1],
but RFC4291 requires all-routers destination [FF02::2] for RS packets.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In function z_vrfy_net_addr_pton(),
the final copy should be to 'dst' variable not to 'src'
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Currently user needs to specify quite much additional options to enable
OpenThread support. He also needs to set ip address count,
heap size, etc depending on features enabled.
Nade changes to automatically select/set some of the options on
enabling OpenThread
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ppp does not populate the lladdr fields in the received packet.
To enable routing for packets received on the ppp interface, the check
of the link layer addresses in the packet must be skipped.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
A net context in LISTENING mode waits for incoming connections, once
a new connection is established a new net context is spawned which
is responsible for handling the new connection.
Therefore when closing a LISTENING context it is not useful to send FIN
as it is never connected. Actually closing the connection would be done
by calling close on the spawned net context which is returned by the
accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Add command to register a receive callback to the net_context used for
the TCP connection that is opened with 'net tcp connect'. The receive
callback will simply print the number of bytes received and inform if
the connection is closed. This makes it possible to test both the tx
and rx paths with the net shell.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
This change fixes routing for routes when the nexthop is a link-local
address of a connected peer.
The issue was that nexthop was correctly set from the routes, but the
code did not detect that the nexthop address (link local of the pc on
ppp interface) was on the ppp interface, because
net_if_ipv6_addr_onlink() only evaluated the network prefix and not
any other information (like the nbr list).
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This change adds new, optional switch to 'net ping' command - to
be more specific the '-I <iface index>', where the <iface index>
is the number of supported network interface.
One can discover this number from the Zephyr shell after running
'net iface'.
The default interface stays the same - just the switch is added to
override the used interface for 'net ping' invocation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The network statistics is stored for each traffic class, but the
collecting function was given net_pkt priority. The priority
must be first converted to traffic class and then the statistics
stored to correct place in the stats array.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Need to use %zd in formatter string for net_pkt_get_len since it returns
a size_t otherwise we get something like:
error: format ‘%d’ expects argument of type ‘int’, but argument
3 has type ‘size_t’ {aka ‘long unsigned int’} [-Werror=format=]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Router Advertisement can have prefix option. It's length
is 4 but the code did not check that which meant that we could
accept malformed packet. See RFC 4861 chapter 4.6.2 for details.
Fixes#25694
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not add same IPv6 prefix, received from RA,
multiple times to prefix timer list. This avoids possible
denial-of-service issue if we receive suitably crafted RA packet.
Fixes#25698
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to support the retransmission for the outgoing data:
1. The outgoing data packet is appended to the send_data queue
in net_tcp_queue_data().
2. tcp_send_queued_data() is called and will use tcp_send_data()
to sends queued but unsent data packet by packet
until there's an unsent data and the receiver's window isn't full.
tcp_send_queued_data() subscribes send_data_timer
that will handle retrasmissions with tcp_resend_data().
3. tcp_send_data() peeks a single chunk of data from the send_data
queue that will not exceed the maximum segment size
until the the receiver's window is full.
tcp_send_data() uses conn->seq and conn->unack_len as the sequence
number for the TCP packet.
conn->unacked_len is advanced on each send.
4. On data acknowledgment:
- acknowledged amount of data is removed from the beginning
of the send_data queue
- conn->seq is advanced by the acknowledged amount
- conn->unacked_len is decremented by the acknowledged amount
- send_data_timer is cancelled
- tcp_send_queued_data() is called to send queued but
prevoiusly unsent data
5. On timeout, tcp_resend_data() will reset conn->unack_len,
peek one packet from the beginning of the send_queue and resend,
terminating the connection on retries exceeded.
Meanwhile the outgoing data tcp_send_queued_data() is just
appended to the send_data but not sent.
In case of the acknowledgement, tcp_send_queued_data() will
start sending multiple packets until the receiver's window
is full.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the retransmission for the outgoind data,
add the following into the TCP connection:
- struct net_pkt *send_data (used as a queue)
- send_data_total
- unack_len
- send_data_timer
- send_data_retries
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
