extended download progress metrics to Bytes, KiB and MiB
separate number of download iterations for INF and numeric case
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Sample tries to estimate maximum number of messages that can be
logged. It was using two system cycles and counting number of
messages logged in that window. It did not take into account the
fact that clock frequency may vary and logging speed also varies
(especially if LOG_IMMEDIATE is enabled). Presented results may
be faulty and misleading.
Fix is attempting to adjust window size to increase precision of
the measurement.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Configuration file was left unchanged after development
of USB Audio class. Deleted configs should never be present.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Due to a long standing difference of requirements enabling deep sleep
will by default cause any application that delays for an unbounded
period to power down. On Nordic doing so turns the system off. Show
how to prevent this from happening while still allowing deep sleep
states to be available for the application's controlled use.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a new configuration option, LORA_SX12XX, that is shared for all of
the LoRaMAC-node-based radio drivers. By default, the appropriate
driver for the LoRa radio in the device tree is included is included
in the build.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
In fat_fs example, if we choose a large size SD card to connect with,
the result of memory size calculation coule be wrong due to the missing
brace for manipulating operator priority.
Fixes#26266.
Signed-off-by: Jui-Chou Chung <jui-chou.chung@nordicsemi.no>
Some of the settings are no longer needed in the sample as OpenThread
configuration manages it by itself.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
This option should be selected by default, as right now LORA=y selects
REQUIRES_FULL_LIBC.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Instead of whitelist, use a filter that checks if a required
"atmel,at45" compatible node is present.
Add a build-only test case to be used by CI and provide a harness
configuration so that execution of the sample can be also verified.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample still used the old name of the nrf9160dk_nrf9160 board,
both in documentation and sample.yaml. Because of the latter, this
sample was not picked up by sanitycheck, what resulted in compilation
errors in the spi_flash_at45 driver not caught by CI.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
USB access to the flash device is not synchronized with the
application, so if the application needs to create a new file system
USB may read configuration state that is incorrect. Wait until the
the application is done with the flash before starting USB.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Simplify overall scenario using sntp_simple to keep main MQTT logic more
clear. Also, remove related code which was used only by the old SNTP
code, e.g. show_addrinfo().
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
Exclude the NXP LPCXpresso55S16 board from the X-NUCLEO-IKS0xAx
samples, since the rely on having Arduino Uno header A3 available.
On the LPCXpresso55S16, A3 is connected through a resistor (R63) which
is not mounted by default.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
The sample does not provide a way to verify its operation
and causes fails on nrf platforms. Added regex checks in sample.yaml
so the sample can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Callback used mqtt_publish_qos1_ack but mqtt_subscribe called with
default 0 value (MQTT_QOS_0_AT_MOST_ONCE)
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
New config file to build an OpenThread NCP for the NRF52840-DK
via CDC-ACM USB on the connector J3 (labelled 'nRF USB').
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
zperf takes a potentially unaligned netowrk packet, casts it to a
struct, and then dereferences the fields. This causes a crash on
cores that don't support unaligned access such as the Cortex-M0+.
Use the UNALIGNED_GET helper instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Also, add prj.conf options to make the sample builds on more
platforms. Finally, update the sample source to print explicit
"Finished" message, to let user know that the processing is done.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed flow control configuration from Kconfig and updated samples
to use device tree for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The upload command invokes lfs_stat() on the destination file which
overflows the stack. Adding 256 bytes seems to make it work.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move to using PRIu64/PRId64 instead of %llu/%lld since on
native_posix_64 the uint64_t/int64_t type is defined in terms of 'long
int' and not 'long long int'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
