Convert older DT_INST_ macro use in esp32 drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix so that different isochronous synchronization modes can be used.
It filters out the synchronization mode before sending the endpoint
type to drivers.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
Add header definition for bt_read_static_addr function. Declaring it
without a header definition will not give any compilation error when
function definition changes.
Refactor nRF SoC specific code into nRF specific source files and
provide weak definitions when these are not implemented. This will make
it easier to add handlers per vendor.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit fixes the field definition names for `GICD_ICFGR`, which
were incorrectly prefixed with `GICC_`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The sole purpose of init options has been to enable hardware flow
control on NS16750 when asked. Use the proper DTS tags for this.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Add Platform Environment Control Interface API
This API defines following calls:
- peci_configure
- peci_enable
- peci_disable
- peci_transaction
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The current Generic Interrupt Controller (GIC) driver makes use of the
multi-level interrupt mechanism and `irq_nextlevel` public interface.
This is a less-than-ideal implementation for the following reasons:
1. The GIC is often used as the main interrupt controller for the
Cortex-A and Cortex-R family SoCs and, in this case, it is not a 2nd
level interrupt controller; in fact, it is the root interrupt
controller and therefore should be treated as such.
2. The only reason for using `irq_nextlevel` here is to interface the
architecture implementation to the interrupt controller functions.
Since there is no nesting or multiple instances of an interrupt
controller involved, there is really no point in adding such an
abstraction.
3. 2nd level topology adds many unnecessary abstractions and results
in strange coding artefacts as well as performance penalty due to
additional branching.
This commit refactors the GIC driver interface as follows:
1. Remove the current GIC driver interface based on the multi-level
interrupt mechanism and the `irq_nextlevel` public interface.
2. Define the GIC driver interface in
`include/drivers/interrupt_controller/gic.h` and allow the arch
implementation to directly invoke this interface.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
i2c_slave_register/unregister must not be syscalls since it provides
callbacks that will run in supervisor mode. Nonetheless, verification
functions were missing which means that these functions never worked
from usermode.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This change removes the hardcoded subsystem list in gen_kobject_list.py
favor of marking the relevant driver API structs with the _subsystem
sentinel.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
Change the doxygen doc from "negative on error" to -ENOSUP and
negative value on driver specific errors.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
If IO APIC is in logical destination mode, local APICs compare their
logical APIC ID defined in LDR (Logical Destination Register) with
the destination code sent with the interrupt to determine whether or not
to accept the incoming interrupt.
This patch programs LDR in xAPIC mode to support IO APIC logical mode.
The local APIC ID from local APIC ID register can't be used as the
'logical APIC ID' because LAPIC ID may not be consecutive numbers hence
it makes it impossible for LDR to encode 8 IDs within 8 bits.
This patch chooses 0 for BSP, and for APs, cpu_number which is the index
to x86_cpuboot[], which ultimately assigned in z_smp_init[].
Signed-off-by: Zide Chen <zide.chen@intel.com>
GPIO_DIR_OUT is deprecated but allowed in devicetree bindings because
some in-tree bindings provided it in the past. GPIO_DIR_IN was the
former explicit way of representing the default direction. Put it
back so symmetry is maintained.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added subsys argument to the callback, updated one driver which
used it and test cases.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use gpio_pin_t uniformly when passing pin indexes to the driver. Use
gpio_flags_t uniformly when passing flags to the driver. Change name
of pin configuration function in API function table to be consistent
with other API functions.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There is a typedef used to store pin indexes in configuration
structures. For consistency it should also be used to identify pin
indexes in function prototypes.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The only remaining port operations have dedicated API function table
entries. Remove the defines for access op (mode), and remove support
for access op from all implementations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The last external reference to these was removed when the pin
write/read functions were deprecated. Remove the syscall support, API
function table entries, and implementation from all drivers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These have been replaced by the appropriate call to
gpio_pin_interrupt_configure(). While the disable function could be
implemented using the new functionality, the enable function cannot
because the interrupt mode is not available. Consequently we cannot
replace these with equivalent functionality using the legacy API.
Clean up the internal implementation by removing the inaccessible
port-based enable/disable feature, leaving the pin-based capability in
place.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update to use new API for GPIO pin configuration and operation. Fix
invalid arithmetic on void pointer. Convert to support devicetree.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update to use new API for GPIO pin configuration and operation. Fix
invalid arithmetic on void pointer. Mark all CC2520 GPIOs as required
in binding.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use new API to configure and interact with GPIOs. Move GPIO
initialization from sample into driver. The existing physical/line
level control has been kept rather than converting to logical level
signals.
Also improve error messages.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove macros and a state structure that are not used anywhere and
incompletely describe a GPIO pin specifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add the common config structure as a prefix of the driver-specific
config structure and use the mask parameter to initialize it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Extend the driver data structure with a field that identifies the pins
supported by the device. Document the fields and who is responsible
for maintaining them.
Update all configuration functions for specific pins to return an
error if the pin is not supported.
Update all set/get functions for specific pins to assert if the pin is
not supported.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Several declarations provided a const pointer to mutable data. Change
all declarations that are not used to change the invert field to be
pointers to const data.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The public API for GPIO flags should use unsigned values, and for
MISRA compliance the size should not be platform-dependent. Add a
typedef for generic flags.
Also add typedefs for pin indexes and devicetree flags so these can
be safely recorded from devicetree property values without risking
loss of information if more flags are added in the future.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Extend the physical level GPIO_OUTPUT_{HIGH,LOW} configuration with
GPIO_OUTPUT_{ACTIVE,INACTIVE} for logic level initialization.
This enables use of device-tree configuration flags in calls to
gpio_pin_configure() to set the logic level without having to
determine the corresponding physical level.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
gpio_pin_interrupt_configure() is invoked from within
gpio_pin_configure() to support legacy code that combines pin and
interrupt configuration. Expressing a disabled interrupt by a zero
value for interrupt flags causes this invocation to disable interrupts
when the intent is to change only a pin configuration, such as pull
direction.
Support a distinction between explicitly disabling interrupts and
leaving the interrupt configuration unchanged.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
gpio_pin_interrupt_configure() verified that the pin was within range,
while gpio_pin_configure() did not. Make them consistent since they
take the same set of flags.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
As the mmio32 is more of a library than a proper driver, just implement
the new port functions and have pin_interrupt_configure marked pretty
much as not supported.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Define the mask in terms of the individual non-zero fields to isolate
from future changes to the bit position.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The debounce flag is to be provided to the pin configuration, not the
pin interrupt configuration.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The asserts verify that:
- Output needs to be enabled for 'Open Drain', 'Open Source' mode to be
supported.
- GPIO_LINE_OPEN_DRAIN flag can be enabled only if GPIO_SINGLE_ENDED is
enabled.
- Only one of GPIO_INT_LOW_0, GPIO_INT_HIGH_1 can be enabled for a level
interrupt.
- GPIO_INT_DEBOUNCE is not passed to gpio_pin_interrupt_configure
function.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
stm32_exti_enable was returning errors on line > 32 or line pointing
to non implemented line. Both conditions are hard-coded, hence there
is no use to detect them dynamically in the code.
Check them with assert. As a consequence, function could now be void.
Additionally, enable exti irq line only if both checks are passed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Since it is now possible to disable/re-enable interrupts and
also to reconfigure an already configured interrupt, it is
now required to clear non requested triggers.
While it is not strictly requested, triggers are also cleared
when interrupt is disabled (assuming trigger should be configured
when interrupt is enabled).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
fixup exti
A large number of sensor drivers specify GPIO_INT_DEBOUNCE to request
a debounced signal; in practice the debounce may be performed by
external components on the board. Historically this flag was ignored
on the many GPIO peripherals that do not support hardware debouncing.
Document that this flag is an exception to the normal rule that
unsupported features should be rejected by gpio_pin_configure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
