The PM subsystem is tested in tests/subsys/pm, the removed tests were
not relevant for devices. The test_build_suspend_device_list test has
been renamed to test_device_list since the API is not strictly related
to PM (and does not depend on it).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since drivers implement a callback based on action and not the state,
we should be using the API based on the action instead of the one based
on the state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The PM callback is no longer referenced as "pm_control" but
"pm_action_cb", so reflect this new naming on the callbacks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM device runtime API calls from pm_device* to the
pm_device_runtime* namespace.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add the pm_control fn to the dummy_driver so the full PM API is tested.
This change also bypasses all PM APIs if the device driver doesn't
support PM.
Signed-off-by: Keith Short <keithshort@google.com>
There are quite a few symbols which are needed before the paging
mechanism is initialized. So they need to be pinned in memory
to prevent page fault early in the boot process.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Busy check APIs now return boolean type. Due to that change, the
function names have also been adjusted. The common name pattern for
boolean check type APIs is "PREFIX_is_CONDITION". For example,
"pm_device_is_busy". pm_device_busy_check has been renamed to
pm_device_is_busy and pm_device_any_busy_check to pm_device_is_any_busy.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test_dummy_device test has nothing to do with device busy testing,
so remove the calls to pm_device_busy_set/pm_device_busy_clear.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The type used by device PM state was not changed to the recently
introduced enum type. The state is also initialized to a value distinct
from the first expected value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use `pm_device_*` prefix for the device runtime PM API. This adds the
API to the `pm` namespace, making it clear part of the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- If device PM is not supported -ENOSYS is returned, update test case to
account for that
- Remove usage of device_pm_control_nop
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There was a linker script change the broke the sorting such that
priority 2 and 20 would not necessary get sorted correctly. Modify
the test to try and catch any such issues in the future.
We modify the DEVICE_DEFINE of the larger priority first, so if the
linker isn't sorting it would get linked first in theory, and we also
tweak the priority value from 4 to 20 so if we aren't sorting correctly
between 2 and 20 we'll catch that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Exclude the test_null_dynamic_name test-suite from running the
test, in Non-Secure mode (Cortex-M), because passing a NULL
device name de-references memory at 0x0 which is likely to
cause a SecureFault and crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
1. Add a null dynamic name testing for device_get_binding().
2. Add a driver which initialization failed in SYS_INIT.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Convert tests to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update pm test case to fix some error last time submission. Add test
case that simply check device_pm_enable and device_pm_disable interface.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Exercise the public macros as well as device_map().
This test has a whitelist for whatever reason; add
mps2_an385 so that the !DEVICE_MMIO_IS_IN_RAM stuff
is tested.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The dummy driver never implemented device power management, so the
fact the not-implemented stub returned success was a false negative.
Verify the expected behavior now, leaving the test code in place for
when somebody provides a non-trivial PM control function.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Tests should always start with test_, otherwise detection of subtests
will not work through sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Device initialization may require use of generic services such as
starting up power rails, some of which may be controlled by GPIOs on
an external controller that can't be used until full kernel services
are available. Generic services can check k_is_in_isr() and mediate
their behavior that way, but currently have no way to determine that
the kernel is not available.
Provide a function that indicates whether initialization is still in
pre-kernel stages where no kernel services are available.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
device_get_binding() compares pointers first before doing strcmp().
However, enabling coverage forces -O0 to disable any compiler
optimizations. There would be multiple copies of the same string,
and the code pathing doing pointer comparsion would not be tested
at all. So add this flag to merge string constants such that
the pointer comparison would be exercised.
This also adds a bad driver which fails initialization. This is
to make sure that execution path is covered.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Set device state to DEVICE_PM_ACTIVE_STATE before making it busy.
Also improves the kernel/device.c coverage.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
